Metal85
MuscleChemistry Registered Member
Principles
The fundamental principles of High Intensity Training (HIT) are that exercise should be brief, infrequent, and intense. Exercises are performed with a high level of effort, or intensity, where it is thought that it will stimulate the body to produce an increase in muscular strength and size. Advocates of HIT believe that this method is superior for strength and size building than most other methods which, for example, may stress lower weights with larger volume (reps).
As strength increases, HIT techniques will have the weight/resistance increased progressively where it is thought that it will provide the muscles with adequate overload to stimulate further improvements. There is an inverse relationship between how intensely and how long one can exercise. As a result, high intensity workouts are generally kept brief. After a High Intensity workout, as with any workout, the body requires time to recover and produce the responses stimulated during the workout, so there is more emphasis on rest and recovery in the HIT philosophy than in most other weight training methods. In any workout, not just HIT, training schedules should allow adequate time between workouts for recovery (and adaptation).
While many typical HIT programs comprise a single-set per exercise, tri-weekly, full-body workout, many variations exist in specific recommendations of set and exercise number, workout routines, volume and frequency of training. The common thread is an emphasis on a high level of effort, relatively brief and infrequent (i.e. not daily) training, and the cadence of a lift, which will be very slow compared to a non-HIT weight training routine.
Most HIT advocates stress the use of controlled lifting speeds and strict form, with special attention paid to avoiding any bouncing, jerking, or yanking of the weight or machine movement arm during exercise. Variations of HIT will vary in advice from lifting the weights smoothly but at a natural pace, others will time the lift, peak hold and descent. In extreme cases, it may take up to 30 seconds to complete a single repetition. While high intensity training is strongly associated with Nautilus exercise equipment, advocates vary in their equipment recommendations.
Also emphasized when near exhaustion, doing static holds for periods of time, and negative reps (lowering the weight) are all methods to further exhaust the muscle or muscles exercised. This will stimulate further growth and strength because muscles are weakest in positive/contracting movements (sometimes referred to as first stage failure of a muscle). Although you may not be able to lift a weight for another rep you will almost certainly be able to hold it statically for a further period (second stage of failure) and finally lower a weight at a slow controlled speed (third stage of failure). Until all three (lifting, holding and lowering) parts of an exercise can no longer be completed in a controlled manner a muscle cannot be considered thoroughly exhausted/exercised.
Aerobic exercise In addition to weight training, an overall exercise program may include elements of aerobic (cardio) and anaerobic training. Aerobic training is what you will recognize as treadmill jogging or walking, cycling or swimming at a low to moderate pace up to a point at which you can still carry on a conversation, even if you are breathing a little heavy. You should be able to keep this up for 30 minutes or more. Low to moderate intensity aerobic exercise is at a heart rate of approximately 50 to 70% of your maximum heart rate. At this intensity, and with reasonable fitness, you should be able to supply the exercising muscles with sufficient oxygen to keep them contracting and performing for some time. Aerobic means “with oxygen.”
Anaerobic exercise In contrast, anaerobic exercise is at an intensity at which your muscles’ requirements for oxygen exceed the amount you can supply by breathing and via your blood supply. At this exercise intensity, you will stop sooner rather than later because the muscles will fail to function. At this level of intensity, your heart rate may be at 90 to 100% of your maximum heart rate. This is clearly high-intensity exercise. Weight training for strength with heavy loads is usually anaerobic exercise for short bursts of effort.HIT and other training routines
HIT will target a single body part with one or two exercises,<SUP id=cite_ref-3 class=reference>[4]</SUP> and generally a single set of 6-10 reps for upper body exercises and either 8-15 or more commonly 12-20 reps for lower body exercises,<SUP style="WHITE-SPACE: nowrap" class=Template-Fact title="This claim needs references to reliable sources from March 2010">[citation needed]</SUP> done to momentary muscular failure. Deadlifts usually have a rep range of 5-8 reps, and calves are sometimes trained with 1-2 sets of failure.<SUP style="WHITE-SPACE: nowrap" class=Template-Fact title="This claim needs references to reliable sources from March 2010">[citation needed]</SUP> Older HIT workouts consisted of whole-body workouts which later changed to split-body routines. Opposite of HIT, a conventional routine will target a single body part with 1-3 exercises, with 3-5 sets of 6-12 repetitions.
Cadence for a HIT workout is supposed to be smooth, but not always Super Slow. A standard HIT cadence is usually 3-1-4-1. For clarity, here are two examples of how the cadence would be for an exercise. On the Lat Pulldown exercise the cadence is as follows: 3 seconds pulling down (Positive movement), followed by a 1 second pause & squeeze (at full contraction), followed by a 4 second return (Negative movement), followed by a 1 second rest. This completes 1 rep.
On the Barbell Squat the cadence is as follows: 4 seconds lowering the bar (the Negative movement), followed by a 1 second pause (at the bottom), followed by 3 seconds raising up the bar (the Positive movement), followed by a 1 second rest at the top. This completes 1 rep.
HIT stresses intensity over repetition. Many weightlifters will use a HIT routine to help break a 'plateau' - meaning they will use HIT temporarily when another routine stops giving desired results. Some HIT trainees will use HIT exclusively as well - Arthur Jones believed HIT was all that was required.
The fundamental principles of High Intensity Training (HIT) are that exercise should be brief, infrequent, and intense. Exercises are performed with a high level of effort, or intensity, where it is thought that it will stimulate the body to produce an increase in muscular strength and size. Advocates of HIT believe that this method is superior for strength and size building than most other methods which, for example, may stress lower weights with larger volume (reps).
As strength increases, HIT techniques will have the weight/resistance increased progressively where it is thought that it will provide the muscles with adequate overload to stimulate further improvements. There is an inverse relationship between how intensely and how long one can exercise. As a result, high intensity workouts are generally kept brief. After a High Intensity workout, as with any workout, the body requires time to recover and produce the responses stimulated during the workout, so there is more emphasis on rest and recovery in the HIT philosophy than in most other weight training methods. In any workout, not just HIT, training schedules should allow adequate time between workouts for recovery (and adaptation).
While many typical HIT programs comprise a single-set per exercise, tri-weekly, full-body workout, many variations exist in specific recommendations of set and exercise number, workout routines, volume and frequency of training. The common thread is an emphasis on a high level of effort, relatively brief and infrequent (i.e. not daily) training, and the cadence of a lift, which will be very slow compared to a non-HIT weight training routine.
Most HIT advocates stress the use of controlled lifting speeds and strict form, with special attention paid to avoiding any bouncing, jerking, or yanking of the weight or machine movement arm during exercise. Variations of HIT will vary in advice from lifting the weights smoothly but at a natural pace, others will time the lift, peak hold and descent. In extreme cases, it may take up to 30 seconds to complete a single repetition. While high intensity training is strongly associated with Nautilus exercise equipment, advocates vary in their equipment recommendations.
Also emphasized when near exhaustion, doing static holds for periods of time, and negative reps (lowering the weight) are all methods to further exhaust the muscle or muscles exercised. This will stimulate further growth and strength because muscles are weakest in positive/contracting movements (sometimes referred to as first stage failure of a muscle). Although you may not be able to lift a weight for another rep you will almost certainly be able to hold it statically for a further period (second stage of failure) and finally lower a weight at a slow controlled speed (third stage of failure). Until all three (lifting, holding and lowering) parts of an exercise can no longer be completed in a controlled manner a muscle cannot be considered thoroughly exhausted/exercised.
Aerobic exercise In addition to weight training, an overall exercise program may include elements of aerobic (cardio) and anaerobic training. Aerobic training is what you will recognize as treadmill jogging or walking, cycling or swimming at a low to moderate pace up to a point at which you can still carry on a conversation, even if you are breathing a little heavy. You should be able to keep this up for 30 minutes or more. Low to moderate intensity aerobic exercise is at a heart rate of approximately 50 to 70% of your maximum heart rate. At this intensity, and with reasonable fitness, you should be able to supply the exercising muscles with sufficient oxygen to keep them contracting and performing for some time. Aerobic means “with oxygen.”
Anaerobic exercise In contrast, anaerobic exercise is at an intensity at which your muscles’ requirements for oxygen exceed the amount you can supply by breathing and via your blood supply. At this exercise intensity, you will stop sooner rather than later because the muscles will fail to function. At this level of intensity, your heart rate may be at 90 to 100% of your maximum heart rate. This is clearly high-intensity exercise. Weight training for strength with heavy loads is usually anaerobic exercise for short bursts of effort.HIT and other training routines
HIT will target a single body part with one or two exercises,<SUP id=cite_ref-3 class=reference>[4]</SUP> and generally a single set of 6-10 reps for upper body exercises and either 8-15 or more commonly 12-20 reps for lower body exercises,<SUP style="WHITE-SPACE: nowrap" class=Template-Fact title="This claim needs references to reliable sources from March 2010">[citation needed]</SUP> done to momentary muscular failure. Deadlifts usually have a rep range of 5-8 reps, and calves are sometimes trained with 1-2 sets of failure.<SUP style="WHITE-SPACE: nowrap" class=Template-Fact title="This claim needs references to reliable sources from March 2010">[citation needed]</SUP> Older HIT workouts consisted of whole-body workouts which later changed to split-body routines. Opposite of HIT, a conventional routine will target a single body part with 1-3 exercises, with 3-5 sets of 6-12 repetitions.
Cadence for a HIT workout is supposed to be smooth, but not always Super Slow. A standard HIT cadence is usually 3-1-4-1. For clarity, here are two examples of how the cadence would be for an exercise. On the Lat Pulldown exercise the cadence is as follows: 3 seconds pulling down (Positive movement), followed by a 1 second pause & squeeze (at full contraction), followed by a 4 second return (Negative movement), followed by a 1 second rest. This completes 1 rep.
On the Barbell Squat the cadence is as follows: 4 seconds lowering the bar (the Negative movement), followed by a 1 second pause (at the bottom), followed by 3 seconds raising up the bar (the Positive movement), followed by a 1 second rest at the top. This completes 1 rep.
HIT stresses intensity over repetition. Many weightlifters will use a HIT routine to help break a 'plateau' - meaning they will use HIT temporarily when another routine stops giving desired results. Some HIT trainees will use HIT exclusively as well - Arthur Jones believed HIT was all that was required.
