Instynct 999 IGF QUESTIONS

[sarcoplasm]

Can you give a run down on storage and use (doseages)of IGF. Also diet strategies and any must know info for best gains possible. I know this board covered alot of this but since it lost some info I'm starting from square one.
Thanks
Sarcoplasm

[sweatmachine]

I found this post:

Go with 40mcg ed for 25 days straight for your 1st time regardless of weight of your animal. I have yet to see anyone have better results with more than 40 who ran 40 the first time around. Let me clairfy. I have yet to see hear from someone who ran their second cycle yet.

Or try this:
weeks:
1gh
2gh
3gh
4gh
5gh + igf
6gh + igf
7gh + igf
8gh + igf



If you have to dilute your 1mg with 2ml of BA. This make it a little easier to measure. On a 1cc slin pin each click would be 2iu=10mcg. 10iu =50mcg.

This makes it alot easier. I always pull 90 units of BW then pull the IGF-1 to disired amount. Then you can shoot it first. Good Luck

DOSAGES

If you are just going to use it by itself, try 40 mcg ed. 1 bottle will last you about 1 month and you should see good results from that.

If you are experienced with AAS, and you are going to run some other things with it, you could probably get away with 30 mcg

I am starting to learn that it is a lot like test to a certain point, the more the better. Obviously there is a point of diminshing returns, but I haven't hit it yet. My understanding is that is probably about 150 mcg per day.

I started at 30 mcg per day, and have gradually moved it up to 80 mcg (40 am / 40 pm)

SJR



NOTE:
(an IFBB pro) posted that the standard dose is 0.8mcg/kg of bodyweight.

[Cracker Jack]

Thanks for the good info sweatmachine,iwas thinking of putting it in with my next go round.

[instynct999]

Originally posted by sarcoplasm
Can you give a run down on storage and use (doseages)of IGF. Also diet strategies and any must know info for best gains possible. I know this board covered alot of this but since it lost some info I'm starting from square one.
Thanks
Sarcoplasm

although some say stoire on the fridge or even the freezer once in a BA solution it actually should be quite stable at room temperature for quite some time
anecdotal evidence has born this out although to be on the safe side keeping it in the fridge is a good idea

diet to feed the animal is determined similar to any normal plan relative to the desired effect one looks to get for the intended animal
protein is to be kept high though is an importnat general rule

[vitor97]

My IGF-1 Looks a tad cloundy, I added 1 ML of BW to the 1ML BA that was in there with the 1MG of IGF1, is this normal, or is it tainted?

[instynct999]

Originally posted by vitor97
My IGF-1 Looks a tad cloundy, I added 1 ML of BW to the 1ML BA that was in there with the 1MG of IGF1, is this normal, or is it tainted?

OUCH!!

never add Bac water directly into the vial

to an insulin pin ONLY then draw from the vial with the BA/LongR3 in it

once you add the bac water to the vial it will degrade rapidly--just how fast and to what extent no one can say for sure but it is not good

sorry to relay the bad news

[sarcoplasm]

Thanks for the info guys.

[supermanxx]

im keeping my in the freezer is this ok or should i put it in the fridge

[instynct999]

Originally posted by supermanxx
im keeping my in the freezer is this ok or should i put it in the fridge

either is fine

[Punisher007]

Originally posted by sweatmachine
I found this post:

If you have to dilute your 1mg with 2ml of BA. This make it a little easier to measure. On a 1cc slin pin each click would be 2iu=10mcg. 10iu =50mcg.

SJR

NOTE:
(an IFBB pro) posted that the standard dose is 0.8mcg/kg of bodyweight.

It seems to me that this information conflicts with what someone else here posted:

1000mcgs in 1 ml of ba is how it comes
add 2 ml (ccs)of ba now that is 333.33 mcgs per cc or ml
divide that by 100 which is how many tics on a slin pin per cc or ml
1 tic =3.3 mcgs of igf so 15 tics = 49.9 mcgs of igf

Which method is right?

[instynct999]

Originally posted by Punisher007
It seems to me that this information conflicts with what someone else here posted:

1000mcgs in 1 ml of ba is how it comes
add 2 ml (ccs)of ba now that is 333.33 mcgs per cc or ml
divide that by 100 which is how many tics on a slin pin per cc or ml
1 tic =3.3 mcgs of igf so 15 tics = 49.9 mcgs of igf

Which method is right?

i believe in the above he meant add 1ml BA to get 2ml total and 1mg/2ml

[5kono4]

When you add 2cc of ba to the igf that makes 1000mcgs of igf in 3 ccs of ba just do the math. You can also just leave it alone and add nothing this just makes it easier to do research with. Its up to you. My buddies and I add the 2 ccs of ba and it has been working great Im in the middle of week 2.

[big_byrd52]

2cc's of BA or BW? it seems it would hurt alot with 2cc's BA!

[instynct999]

BA--never add BW to the vial

[5kono4]

The 2 ccs ba are added into the vial of igf when you get it and put into the freezer. You draw up some bw then the amount of igf you need for research into the same pin and inject. The 2ccs of ba are never injected all at once that would burn!

[big_byrd52]

ok gotcha, i misread that.

Instynct, Hpe the hell did u get 6,020 posts on this board
alone? ur all over the place too! i wish i had that kind of time on my hands!:D