Incoming Robolics Cruise!

[JackSteel]

Robolics Labs Intelligence

 

[Muscle mechanic]

Robolics Labs Intelligence

JS, tell me. I have enough primo to run a good cruise. I will use test at trt dose until bloods 100 mg cyp
On primo I will use it thru bloods too
Prolly at 3-400 a week.
How long does it take for primo depot to be felt if noticed?

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[JackSteel]

JS, tell me. I have enough primo to run a good cruise. I will use test at trt dose until bloods 100 mg cyp
On primo I will use it thru bloods too
Prolly at 3-400 a week.
How long does it take for primo depot to be felt if noticed?

Sent from my SAMSUNG-SM-G890A using Tapatalk

This is my first time running it, man, but it's enanthate ester so your typical 5 weeks or so. I'm feeling it but it is a weaker steroid so it's nothing extreme. It's good though


Robolics Labs Intelligence

 

[JackSteel]

Okay holy shit. I haven't been this horny since my first couple of cycles. I'm literally beating off, then having sex, then beating off again a few hours after lol I didn't realize primo would be that strong in the libido area. Feeling great!


Robolics Labs Intelligence

 

[Presser]

Looking good

 

[JackSteel]

Looking good

Hey thanks Presser. I need to bump the calories up since I've been at a deficit so long now.


Robolics Labs Intelligence

 

[JackSteel]

Primo and mast or both very mild.
Unless u run them high enough they will not do much of anything but give shbg.
Why not just use proviron for that?

And the primo is 200 with no pip!
I never heard of that. Wow!
I know it's the weight of primo that causes pip over a certain amount!
Most I know use primo depot 100 at everyday or eod to get enough per week and avoid to pip!



Sent from my SAMSUNG-SM-G890A using Tapatalk

Very seldom will I get a slight PIP with primo but I think it was from being a bigger than normal shot. I haven't done 3ml in a while. That's only happened a handful of times.

I appreciate the subtlety of primo. Slow and gentle but unstoppable like a tank. That's how I view it. It also has immune system boosting properties at 100-200mg which I'm also using it for. I react really well anyway to low doses of aas so I think 500 Is fair for me personally. Masteron I almost always use solely for SHBG. So that's why I run it low.


Robolics Labs Intelligence

 

[Muscle mechanic]

Very seldom will I get a slight PIP with primo but I think it was from being a bigger than normal shot. I haven't done 3ml in a while. That's only happened a handful of times.

I appreciate the subtlety of primo. Slow and gentle but unstoppable like a tank. That's how I view it. It also has immune system boosting properties at 100-200mg which I'm also using it for. I react really well anyway to low doses of aas so I think 500 Is fair for me personally. Masteron I almost always use solely for SHBG. So that's why I run it low.


Robolics Labs Intelligence

What I asked for, is primo has a very heavy molecular weight!!!
Anything over 125 mg crashes.
Everyone I know that has gotten it to hold a little while at 150 mg or more they can't walk after a pin.
It has nothing to do with carrier it's the weight of it!!!
Almost didn t wanna put this up because I don't wanna confuse anyone with doubt or skepticism but I just didn't know if it called a 200 because some labs have a npp 150 but it days on vial 125 mg per ml for example

I have never heard of primo 200 being true
I know someone that had some but it has to be heated often to uncrash and it's painful think it's a 150 or 175 though.
Just was wondering is all.


Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Muscle mechanic]

I have some 100 primo and some 125 and it sucks I have ace and depot.
I have to do it a few times a week just to get to 400 mg. Lol!!!
It sucks in alot of ways but with TRT bloods and running it through I can't take a chance without lab max to say the least with anything I will run up until and through bloods!!!

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[JackSteel]

What I asked for, is primo has a very heavy molecular weight!!!
Anything over 125 mg crashes.
Everyone I know that has gotten it to hold a little while at 150 mg or more they can't walk after a pin.
It has nothing to do with carrier it's the weight of it!!!
Almost didn t wanna put this up because I don't wanna confuse anyone with doubt or skepticism but I just didn't know if it called a 200 because some labs have a npp 150 but it days on vial 125 mg per ml for example

I have never heard of primo 200 being true
I know someone that had some but it has to be heated often to uncrash and it's painful think it's a 150 or 175 though.
Just was wondering is all.


Sent from my SAMSUNG-SM-G890A using Tapatalk

It is 200. But technically it only has about 140sum mg per ml. You can do these rare concentrations but it takes some real know how and probably more solvents. Robo's bold cyp and ace are also very potent and no PIP. It's not common but Robo has been brewing for a long ass time. He's picked up some skills over the years.


Robolics Labs Intelligence

 

[IronHound]

Has Robolics gear ever been tested? Their sales seem too good to be true. Way cheaper than I would expect.

 

[Frank Garrett]

Has Robolics gear ever been tested? Their sales seem too good to be true. Way cheaper than I would expect.

dude they been around for a long time.. lots of testing has been done.. bloodwork and labmax etc. just do a search

their prices are very good and their customer service is A++.. not too good to be true, they take care of their customers bigtime.. not like some UGL's which sell product that they don't even have in stock

 

[JackSteel]

dude they been around for a long time.. lots of testing has been done.. bloodwork and labmax etc. just do a search

their prices are very good and their customer service is A++.. not too good to be true, they take care of their customers bigtime.. not like some UGL's which sell product that they don't even have in stock

He actually just told me prices are probably going down more FYI.


Robolics Labs Intelligence

 

[JackSteel]

Has Robolics gear ever been tested? Their sales seem too good to be true. Way cheaper than I would expect.

He's been in business over a decade at this point. Same name and everything obviously. That doesn't happen often. If he wasn't badass he probably wouldn't be in business this long IMO.


Robolics Labs Intelligence

 

[gandhisays]

robolics has to be one of the longest standing brands i can think of without bad press.

 

[FL1025]

Has Robolics gear ever been tested? Their sales seem too good to be true. Way cheaper than I would expect.

There are several boards with ROBO bloods on them just FYI

 

[Muscle mechanic]

He actually just told me prices are probably going down more FYI.


Robolics Labs Intelligence

I heard they were good but way too high priced.
So if going down great.
I am always honest and on the primo depot say again it is 140 and not 200
I understood.
The weight if primo is the issue with high concentrations.
Lab max only tells positive or neg. And no bloods confirm primo at 200 or 125 just saying.
I know factory's with chemist that say it can't be done and if it is u will not walk.
Sorry but I wouldn't use something that defy's laws if physics like 200 primo that is painless.
Excuse me don't mean to be rude but I will never by 20p primo unless there is a breakthru in science and molecular weight of such a compound holding at 200 mg per ml.
Solvents work with concentrations per ml but not with the weight.
Same with var try to make a solution u will shake your suspension.
Let me shut up.
Brewing is easy and there us nothing special about any of it.
If u can do math have sterile practices and filter then boom.
Then if u pick up for a buddy they think u tampered with cause of safety seal not there.
Robo has good products but a cap and crimper would help.
No offense take with grain of salt. I recommend robo alot but I just wonder about these things.
No offense my option was stateed.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[JackSteel]

I heard they were good but way too high priced.
So if going down great.
I am always honest and on the primo depot say again it is 140 and not 200
I understood.
The weight if primo is the issue with high concentrations.
Lab max only tells positive or neg. And no bloods confirm primo at 200 or 125 just saying.
I know factory's with chemist that say it can't be done and if it is u will not walk.
Sorry but I wouldn't use something that defy's laws if physics like 200 primo that is painless.
Excuse me don't mean to be rude but I will never by 20p primo unless there is a breakthru in science and molecular weight of such a compound holding at 200 mg per ml.
Solvents work with concentrations per ml but not with the weight.
Same with var try to make a solution u will shake your suspension.
Let me shut up.
Brewing is easy and there us nothing special about any of it.
If u can do math have sterile practices and filter then boom.
Then if u pick up for a buddy they think u tampered with cause of safety seal not there.
Robo has good products but a cap and crimper would help.
No offense take with grain of salt. I recommend robo alot but I just wonder about these things.
No offense my option was stateed.

Sent from my SAMSUNG-SM-G890A using Tapatalk

I hear you but chemists who work at actually pharmaceutical factories can't do what UGLs do to suspend raws. They don't have the option of making it painful or perhaps high in solvents like are used. They have to fit a certain standard. UGLs don't have that government.
And of course we don't mind you stating your opinion, that's what forums are all about brotha


Robolics Labs Intelligence

 

[Muscle mechanic]

I hear you but chemists who work at actually pharmaceutical factories can't do what UGLs do to suspend raws. They don't have the option of making it painful or perhaps high in solvents like are used. They have to fit a certain standard. UGLs don't have that government.
And of course we don't mind you stating your opinion, that's what forums are all about brotha


Robolics Labs Intelligence

I was talking about super labs abroad!

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Muscle mechanic]

I hear you but chemists who work at actually pharmaceutical factories can't do what UGLs do to suspend raws. They don't have the option of making it painful or perhaps high in solvents like are used. They have to fit a certain standard. UGLs don't have that government.
And of course we don't mind you stating your opinion, that's what forums are all about brotha


Robolics Labs Intelligence

The same super labs that make raws, finishes product, and 191 HGH

Sent from my SAMSUNG-SM-G890A using Tapatalk