Ugl and Safety

[Muscle mechanic]

This is to make u guys aware that some tainted stuff can be found out there.

First will show crashed gear that was way worse this is after hot water method to try and put back into solution.

Then I will show what is something pink don't know not sure disgusting was this even filters or were old bottles used.

Asked for more info on this place but guy claims he is waiting till he gets safe stuff before he blasts them.

If i get this info will ask admins if I can post the tainted lab.

I wouldn't trust anything from this place period! Uh uh uh!!!!

If i recieved that I would be pissed and look else where

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Muscle mechanic]

Almost looks like those biology things with stuff preserved.
These kinds of places or what's causing problems. If someone sent me that I would prolly call health. Department on them at least.
Has anyone else seen this if so let's here it.


Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[drtbear1967]

Some people will do anything to make a buck. Regardless of the cost to others.

 

[BEASTZ6]

Toss it.

 

[Muscle mechanic]

Toss it.

I know u experienced brother
The ones with Crystal jelly at bottom were totally crystalled half and half some at top.
Is this crashed?

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[BEASTZ6]

Yea, it's crashed, but there is something else that doesn't seem right. That pinkish glob bothers me. Most likely bacteria of one form or another.

 

[BigZ]

Wow, that's some nasty stuff, completely unusable.

 

[Muscle mechanic]

Yea, it's crashed, but there is something else that doesn't seem right. That pinkish glob bothers me. Most likely bacteria of one form or another.

The pink ones I was told were Chlorohexidine rinse to antibacterial wash but sloppy work were not rinsed with distilled water and then alcohol.
Any bacterial soap can be used and it depends on condition of vials.


The others were clearly crashed to me, but same guy said those were not rinsed with soap too. I told him I think his ugl is NOT experienced. U should practice with oil
only in getting vial situation residue down.

Then keep gear long enough to hold.
Some people just weren't meant to do things and it's what gives this all a bad name.
Basskiller has some methods but so MC does too.
I believe every brewer should brew for themselves instead of trying to whatever for a long long time before even giving to a buddy!!!
If we choose to put ourselves at risk then
Fine but if someone is gonna put others at risk then they are a different breed of people and don't belong with us!
The steroid using bodybuilding community is full of disaplined guys that stive on being good people and wouldn't put anyone at risk but there are poisers that fell off their Morals long ago!!!

Seeing this caught my attention in a bad way and will protect us and what we do from irresponsible people!

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Macho313]

Did the guy at least tell you before he sent these that they were no good, and that he was going to trash them? Also did he replace them?

Sent from my XT1650 using Tapatalk

 

[Macho313]

I would say ditch the whole clorohydroxyzine. Just wash the vials with dial dish soap Prince them out very well then brims them in 90% isopropyl alcohol wait for them to dry sit them upside down on a clean piece of tin foil on a baking tray and put them in the oven at 375 for 1 hour. By doing it that way his product should come out looking like this..

Sent from my XT1650 using Tapatalk

 

[Macho313]

The pink ones I was told were Chlorohexidine rinse to antibacterial wash but sloppy work were not rinsed with distilled water and then alcohol.
Any bacterial soap can be used and it depends on condition of vials.


The others were clearly crashed to me, but same guy said those were not rinsed with soap too. I told him I think his ugl is NOT experienced. U should practice with oil
only in getting vial situation residue down.

Then keep gear long enough to hold.
Some people just weren't meant to do things and it's what gives this all a bad name.
Basskiller has some methods but so MC does too.
I believe every brewer should brew for themselves instead of trying to whatever for a long long time before even giving to a buddy!!!
If we choose to put ourselves at risk then
Fine but if someone is gonna put others at risk then they are a different breed of people and don't belong with us!
The steroid using bodybuilding community is full of disaplined guys that stive on being good people and wouldn't put anyone at risk but there are poisers that fell off their Morals long ago!!!

Seeing this caught my attention in a bad way and will protect us and what we do from irresponsible people!

Sent from my SAMSUNG-SM-G890A using Tapatalk

I see you liked my post and my picture but never answered my question. Did the guy tell you up front what happened with these and tell you to throw them away and replace them with good ones?

Sent from my XT1650 using Tapatalk

 

[Muscle mechanic]

Did the guy at least tell you before he sent these that they were no good, and that he was going to trash them? Also did he replace them?

Sent from my XT1650 using Tapatalk

It wasn't me brother, I just was approached with the issue, and asked about it.
Don't know him.
He was upset and told him just wait and see.


Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Macho313]

It wasn't me brother, I just was approached with the issue, and asked about it.
Don't know him.
He was upset and told him just wait and see.


Sent from my SAMSUNG-SM-G890A using Tapatalk

Really and that's the god honest truth you never talk to the guy? someone else brought these to your attention?

Sent from my XT1650 using Tapatalk

 

[Muscle mechanic]

I would say ditch the whole clorohydroxyzine. Just wash the vials with dial dish soap Prince them out very well then brims them in 90% isopropyl alcohol wait for them to dry sit them upside down on a clean piece of tin foil on a baking tray and put them in the oven at 375 for 1 hour. By doing it that way his product should come out looking like this..

Sent from my XT1650 using Tapatalk

That looks good.
For myself i always shook with alcohol but I have used anti-bacterial soap cause when used on self I re-use my old vials.
Glass is recycled so why no huh? Lol!

In mechanic field I know a few tricks that don't leave a residue but with not post or say because it's much more flammable than alcohol dry fast no residue and then alcohol risned.

Solvents work well to break thru scum and oils like beaker or media bottles too and vials new or old!

But not into that much just for self sometimes.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Muscle mechanic]

Really and that's the god honest truth you never talk to the guy? someone else brought these to your attention?

Sent from my XT1650 using Tapatalk

Talked to guy who recieved. Know my post may have not said it right. But that's what I meant.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Macho313]

That looks good.
For myself i always shook with alcohol but I have used anti-bacterial soap cause when used on self I re-use my old vials.
Glass is recycled so why no huh? Lol!

In mechanic field I know a few tricks that don't leave a residue but with not post or say because it's much more flammable than alcohol dry fast no residue and then alcohol risned.

Solvents work well to break thru scum and oils like beaker or media bottles too and vials new or old!

But not into that much just for self sometimes.

Sent from my SAMSUNG-SM-G890A using Tapatalk

Really you would reuse a 10 mL vial 1000 of them for $300? If I was that broke are that worried about money the last name all my mind would be making or using gear. I would be more worried about getting my priorities in order, and when you have a family I do not think that using gear should be your first priority. Just saying..

Sent from my XT1650 using Tapatalk

 

[Muscle mechanic]

Really you would reuse a 10 mL vial 1000 of them for $300? If I was that broke are that worried about money the last name all my mind would be making or using gear. I would be more worried about getting my priorities in order, and when you have a family I do not think that using gear should be your first priority. Just saying..

Sent from my XT1650 using Tapatalk

Don't do this was speaking of what I have done for myself.
I don't like paper trails. And I have kept my TRT bottles and used before same as reusing a beaker. But I posted this out of concern not interested in making gear at all. When the law is compromised a family is at risk.
Easy I know is says Macho, but easy bro.
I only have done that on myself.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Macho313]

Don't do this was speaking of what I have done for myself.
I don't like paper trails. And I have kept my TRT bottles and used before same as reusing a beaker. But I posted this out of concern not interested in making gear at all. When the law is compromised a family is at risk.
Easy I know is says Macho, but easy bro.
I only have done that on myself.

Sent from my SAMSUNG-SM-G890A using Tapatalk

I don't know what you mean by that but if you're referring to the fact that Macho 313 is BigMills you're completely right. I also don't know what you mean when you say easy what's that all about?

Sent from my XT1650 using Tapatalk

 

[Muscle mechanic]

I don't know what you mean by that but if you're referring to the fact that Macho 313 is BigMills you're completely right. I also don't know what you mean when you say easy what's that all about?

Sent from my XT1650 using Tapatalk

I posted this out of concern for ugl gear. Not a completion on brewing. Not any of my concern. It comes up on tapatalk as same guy I knew that, I was referring to being Macho!! Was only kidding sorry didn't mean it that way.
Am helping guy thru pm on labs estro ranges.
Did't quiet follow very well.
Sorry bro, think I misunderstood is all

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Vanilachi]

Good info bro's.... I'm learning as much as possible lately. Doing my research so I have a better chance at success with my UGL venture. I need to learn all the in's and out's before I start. If anyone has any advice I'd love to hear it!