Powder Conversion Recipies
- Thread starter jstarks11
- Start date
Powderguy
MuscleChemistry Registered Member
Ok thanks..
So lower the Bb to 15mls per the 200mls
the BA should be 2mls per 200mls
you need to dissolve the raw in the solvents first-if it turns cloudy your raw has not finished the acid wash process-add 1-2 mg sodium bicarbonate (baking soda) to the solution
Gently heat it to turn it fairly clear and heat your oil no hotter than 150 Degrees, luke warm. Add it to the mix and filter.
The PIP could be the high BA and the Test E not completing its full process from the manufacturer-Test E that has completed the process will always run 3-5$ per gram. if the Test E price is roughly 35-40$ per 10Grams then its the Subgrade and not pure and is the type they use in chemical experiments not human Pharm grade.
So lower the Bb to 15mls per the 200mls
the BA should be 2mls per 200mls
you need to dissolve the raw in the solvents first-if it turns cloudy your raw has not finished the acid wash process-add 1-2 mg sodium bicarbonate (baking soda) to the solution
Gently heat it to turn it fairly clear and heat your oil no hotter than 150 Degrees, luke warm. Add it to the mix and filter.
The PIP could be the high BA and the Test E not completing its full process from the manufacturer-Test E that has completed the process will always run 3-5$ per gram. if the Test E price is roughly 35-40$ per 10Grams then its the Subgrade and not pure and is the type they use in chemical experiments not human Pharm grade.
t.c.jones
New member
Hey Powderguy could you show us the equation to do for displacement?
i dont understand the purpose or meaning of displacement ??
I mean if you know where the line is to fill large vial or beaker to for a certain amount of ML's then why do you need to know displacement?
ANother words if your making something thats 100mls, and you know the 100ml marker on the beaker or large vial, then don't you just add the powder, then the ba and bb , let is dissolve, then fill the beaker or vial up to the marked area for 100ml with your oil? I just don't understand what the purpose of displacement math is all about
am i missing something? if so then i would like to know, cause it doesn't make any sense to me so long as you already know where your marker is for however many MLs your making, or am i missing something here
I mean if you know where the line is to fill large vial or beaker to for a certain amount of ML's then why do you need to know displacement?
ANother words if your making something thats 100mls, and you know the 100ml marker on the beaker or large vial, then don't you just add the powder, then the ba and bb , let is dissolve, then fill the beaker or vial up to the marked area for 100ml with your oil? I just don't understand what the purpose of displacement math is all about
am i missing something? if so then i would like to know, cause it doesn't make any sense to me so long as you already know where your marker is for however many MLs your making, or am i missing something here
Powderguy
MuscleChemistry Registered Member
Your not bro..i think some are Anal about the mg/ml volume. honestly its not going to make a huge difference but its what they asked for.
EX Test Dec displaces .962 of 1 gram added which in turn displaces 1 ml Well close to it.
After the solution is made the .038 displacement area can be filled with additional powder for more mg/ml ratio or more fluid volume.
its the 1cent that gets put in the change jar, after a high volume it eventually adds up.
Honestly the only reason displacement should be an issue is if it over 1.0 displacement. Most of the common ones are already listed but apparently some are chemists and need to have it extremely accurate but it still doesn't resolve how much is in the filtration process-right?
anyhow, I will list it and see if its that vital.
EX Test Dec displaces .962 of 1 gram added which in turn displaces 1 ml Well close to it.
After the solution is made the .038 displacement area can be filled with additional powder for more mg/ml ratio or more fluid volume.
its the 1cent that gets put in the change jar, after a high volume it eventually adds up.
Honestly the only reason displacement should be an issue is if it over 1.0 displacement. Most of the common ones are already listed but apparently some are chemists and need to have it extremely accurate but it still doesn't resolve how much is in the filtration process-right?
anyhow, I will list it and see if its that vital.
Thanks for asking this question because i was in the same boat as you. In a thermo dynamics class in i recently took, we were taught that after the one hundredth decimal place there really is no need for any value. It will not necessarily give you a more precise answer. In fact, it may cause you more problems down the line in the equation. I imagine this could be the same, to a certain extent in chemistry. It's been a while, but in engineering chem 2 we were taught to carry out the decimal points until the final answer, and depending on the value and number of significant numbers is how many decimal places should be used. I maybe going way to in depth but i agree with you, don't think it matters much.
- - - Updated - - -
Thanks for the explanation. I was under the same assumption as presser. I didn't think it mattered much.
im glad you asked cause its ben bothering me every time i read about displacement, and have been wanting to ask this question for years now actually lol
Dbol oil recipe needed,
Looking for a stable recipe @50mg/ml(if pos)in gso,bb,ba(wats highest concentration u guys made?
Trying to stay away from guaiacol and eo,if I can.
If not please point me to a recipe with guaiacol and eo,
There's too many conflicting recipes,
If any of the good guys can help with a tried and tested recipe please.
Looking for a stable recipe @50mg/ml(if pos)in gso,bb,ba(wats highest concentration u guys made?
Trying to stay away from guaiacol and eo,if I can.
If not please point me to a recipe with guaiacol and eo,
There's too many conflicting recipes,
If any of the good guys can help with a tried and tested recipe please.
Valerio420
New member
Thanks for the info
Hi guys! Been offline almost 18 months but back now 
dont think someone noticed, haha but anyway, I used to brew alot of gear, but feeling little rusty after one and a half years of no practice. I used to do 2%BA 20%BB to almost everything except deca, test e and eq. For those I usually did 15% bb.
So anyway, now Im starting brewing again and Im thinking about lower ba to 1-1,5% and lowering bb to 10-15%... What do you guys think? Ive made alot before with mostly very nice oils with very little if any pip. Will tren e/a and test/mast prop hold in 10%bb? I make 1000ml batches, if that matters... Thankful for advices and thoughts good to be back!
dont think someone noticed, haha but anyway, I used to brew alot of gear, but feeling little rusty after one and a half years of no practice. I used to do 2%BA 20%BB to almost everything except deca, test e and eq. For those I usually did 15% bb. So anyway, now Im starting brewing again and Im thinking about lower ba to 1-1,5% and lowering bb to 10-15%... What do you guys think? Ive made alot before with mostly very nice oils with very little if any pip. Will tren e/a and test/mast prop hold in 10%bb? I make 1000ml batches, if that matters... Thankful for advices and thoughts
good to be back!
Hi guys! Been offline almost 18 months but back now
So anyway, now Im starting brewing again and Im thinking about lower ba to 1-1,5% and lowering bb to 10-15%... What do you guys think? Ive made alot before with mostly very nice oils with very little if any pip. Will tren e/a and test/mast prop hold in 10%bb? I make 1000ml batches, if that matters... Thankful for advices and thoughts
Welcome back and where have ya been? Most people say "I been gone about a year and half", the only kind of people I know who say " I was gone for 18 months" are those who just got out of jail!
Haha Presser, nice to talk to you again bro, and your absolutely right I am afraid. Its a fucked up world we live in when a man can not train and develop his body as he wishes, with the methods of his choice, even though nobody gets hurt or even really care. In another Scandi nation steroids got prohibited just a few years ago. Fells like they make laws in the wrong direction. They advert alcohol like its fine with no side-effects and doctors are feeding people with different drugs everyday, pills for sleeping, for pain, for this and for that.. But a few extra shots of testo, no sir. That is stepping over the line. Sick. Alot of OT, sorry for that. Nice to be back anyway.
Well welcome back and not sure exactly how or why you got 18 months but if i were you i would certainly go get a legit Hormone Replacement Therapy Script if at all possible, last thing ya need is to get into trouble again my man!
How did ya get in trouble anyhow, or for what exactly? I know its none of my business, but if your story can help someone else stay out of trouble then why not share it ya know, and i hope you were selling gear brutha, as theyll crucify ya for that shit , especially in the U.S.
We have too many young knuckle heads who dont think its a big deal to deal steroids, and dont understand the consequences, not saying thats the case with you, maybe it was or not, i know i was young and dumb , and did stupid shit , so im certainly not throwing any stones my man!
And if you went to jail for for personal use, i think thats absolute bullshit!
Similar threads
