Powder Conversion Recipies

Here are some recipes I found that I think need to be looked at. These are very good recipes and should help out many. Remember, unless you're putting a very small mg/ml in your brew then you should be better off to use 18 to 20 % BB. These recipes are set up for a 50% Ethyl Oleate (co solvent and sort of an oil) and 50% Grape Seed Oil as this oil is thinner than Sesame and makes for smoother injections not to mention that it is healthier (has vitamins and stuff sesame doesn't Yippppeeeee!) You can use pure EO if you want it will hold stuff in suspension better (wont crash as easy). It's expensive but worth it if you have the money. There is no steps to conversion here because all of them are the same! The way you cook your brew now (unless you're doing it wrong) is the way you brew this.
Have fun!!!!!


Test E/C/D, Deca, Eq, Tren E, Primo E 50mls @ 200mgs/ml
10g powder
17.5ml Ethyl Oleate (EO)
16ml Grapeseed Oil (GSO)
1.5ml BA (3%)
7.5ml BB (15%)

Test E/C/D, Deca, Eq, Tren E, Primo E 40mls @ 250mgs/ml
10g powder
13.3ml EO
12 ml GSO
1.2ml BA (3%)
6ml BB (15%)

Test E/C/D, Deca, Eq 40mls @ 300mgs/ml
12g powder
11.8ml EO
10ml GSO
1.2ml BA (3%)
8ml BB (20%)

Test E/D, Deca, Eq 30mls @ 333mgs/ml
10g powder
10ml EO
5.6ml GSO
.9ml BA (3%)
6ml BB (20%)

Test Prop (TP)/PhenylProp (TPP), Tren A, Masteron, Npp 100mls @ 100mg/ml
10g powder
37.5ml EO
37ml GSO
3ml BA (3%)
15ml BB (15%)

Test Phenylprop, Masteron, Npp 60mls @ 150mg/ml
9g powder
25ml EO
14.5ml GSO
1.8ml BA (3%)
12ml BB (20%)

Test PP, Masteron, NPP 60mls @ 166mg/ml
10g powder
25ml EO
13.7 GSO
1.8ml BA (3%)
12 ml BB (20%)

Cut Stack (test p 75mg/ml, tren a 50mg/ml, masteron 50mg/ml) 40mls @ 175mg/ml
3g test prop powder
2g tren a powder
2g masteron powder
15ml EO
10.6ml GSO
1.2ml BA (3%)
8ml BB (20%)

Mass Stack (Test E 150mg/ml, Deca 100mg/ml) 40mls @ 250mg/ml
6g test E powder
4g deca powder
13ml EO
12.3ml GSO
1.2ml BA (3%)
6ml BB (15%)

Sustanon 100mls @ 250mgs/ml
10g test dec
6g test iso
6g test phenyl
3g test p
32ml EO
31.25ml oil
3ml BA (3%)
15ml BB (15%)

Sustanon 100mls @ 350mgs/ml
13g test dec
8g test iso
8g test phenyl
6g test p
30.75mls EO
20mls GSO
3ml BA (3%)
20ml BB (20%)

TP(PP)/NPP stack (test p/pp 75mg/ml, npp 50mg/ml) 40mls @ 125mg/ml
3g test p/pp powder
2g npp powder
15.1ml EO
12ml GSO
1.2ml BA (3%)
8ml BB (20%)

Test Acetate (A), P, or PP/Tren A stack (test A/P/or PP 75mg/ml, tren a 50mg/ml) 40mls @ 125mg/ml
3g test a/p/pp powder
2g tren a powder
15.1ml EO
12ml GSO
1.2ml BA (3%)
8ml BB (20%)

Winstrol Recipe#1
50ml @ 50mg/ml
2.5g powder
8ml BB
2.5ml BA
1ml peg 300
.5ml poly
mix powder, bb, ba, and poly and heat at 325 degrees until dissolved, filter, and add 39ml distilled water and re-filter.

Winstrol recipe #2
20mls @ 50mg/ml
1g powder
4.8ml BB
0.6ml BA
0.6ml polysorbate 80
12.5ml distilled water
mix powder, BB, BA, and poly and heat until dissolved. filter, add water and re-filter


Winstrol recipe #3 Oil based (never done this but i trust the recipe)
20ml @ 50mg/ml
1g winstrol powder
17ml oil
.2ml BA
2 ml guaiacol ("super solvent")
mix powder and guaiacol first then add oil and BA. __________________
thats just like....your opinion, man.

---

<meta name="msvalidate.01" content="0A11881B1AEDD78098540D1217685595">

Great info bro!! Thanks!!

Ntr
muscle_4you

ive tried the last formula listed here. I had some problems with it. Making that small of amount is hard to get it to dissolve without burning it. It turns to jelly. Thick. I've ruined 15 gms now f-ing with this. Has anyone tried the win recipe 1 or 2 yet?

bump

just post the fucking recipe already! this thread is old, and your talking to yourself, enough already!

If I'm talking to myself then please stay out of my conversation brainiak!. Its a very intelligent and tough guy that can sit behind a computer barking like a dog.. I'm just say-in...........oh and I dont have time to spend all day on the forums jumping into to every little topic possible and being negative towards people offering there help so I wasnt aware that it was dead. Ive been at the gym all week.......lol....My experience is made from studying hard, life experience and consistency....Oh did I mention that we have submitted our official recipe to Eyli-Lili and the US patten office? Ya so when they start having the shit at your local pharmacy it will be the exact recipe that I post..........in an email to the guy that asked for it. That way undeserving people wont have the chance to mess it up. Thanks

lol, yes you submitted your recipe to the Pharma companies, and your Oh so close to getting a Patten on it, lol, get the fuck out of here with your useless dribble!

making sticky thread

Here is something I wanted to add to this thread. This will help when making your conversions and you can adjust the quantity of solvent and carriers as necessary.

*Testosterone Base - 1g Displaces 0.893mL
TestosteronePropionate - 1g Displaces 0.909mL
Testosterone enanthate - 1g Displaces 0.943mL
Testosterone cypionate - 1g Displaces 0.909mL
Testosterone decanoate - 1g Displaces 0.962mL
Testosterone Isocaproate - 1g Displaces 0.935mL
Testosterone Phenylpropionate - 1g Displaces 0.885mL
Trenbolone Acetate - 1g Displaces 0.848mL
Trenbolone enanthate- 1g Displaces 0.909mL
Nandrolone deconate- 1g Displaces 0.962mL
Masterone propionate - 1g Displaces 0.935mL




Something to remember is that some powders are not water or organic material soluble and therefore require a solvent heat mixture to dissolve them, once placed in a carrier they can become separated (like water does in oil) and will not hold saturated in organic substances. Example of these are *test base, methandrostenolone, stanozolol , oxymetholone and oxandrolone. These substances are solvent soluble and not organic material soluble. They must be heated and dissolved in a solvent before mixed with a heated carrier, or heated and pressed into tabs with a filler(binder).

Hope this helps some

---

January 14th, 2024



This table lists various anabolic steroid compounds along with their displacement values, indicating the volume displaced by 1 gram of the compound. Remember, this information is for informational purposes and should be used responsibly and legally by qualified individuals.

hey rich.. i wouldnt mind looking at ur recipe on the winny and others tht u might want to share.. i have a full lab setup as well... how do i pm you to look at this recipe.. thanks for all your help if u choose to respond ..

hey powder guy !!! .. awesome read was trying to find the displacements everywhere... thanks so much.. would u have the displacments for all of the raw hormone compounds lik npp,d-bol etc ???? or where i could find them at if u dont have them on hand.. thanks..

You can take molecular weight and do the math for displacement. Its pretty simple really, but I can do it and post the rest of them here if that helps.

powderguy ,,, thanks bro tht would really help if u could post the rest of the compounds .. YOU ROCK ! and if possible could u show me the equation in order to get these displacements ??? i want to be able to do this if i ever need to and i dont have my ratios near me.. if this is to mucgh then thts cool.. all the help you post would be much appreciated sir. hope tht all is well with you and family

looks like suckin the ... didnt get you much of anything huh... hahaha

BuryMeBig said:

looks like suckin the ... didnt get you much of anything huh... hahaha

Click to expand...

all its going to get you is banned..how do you like that?

lol, howd i miss this gem lol

LOL I know right.

How low can you go on the BB in standard test?
How about test P? I went 15% and a I had a bad PIP?

miggymig said:

How low can you go on the BB in standard test?
How about test P? I went 15% and a I had a bad PIP?

Click to expand...

Standard test? I need more info. What kind of test? How much BA was added, What was the Mg/ML ration and what was the amount of BA/BB in how many ML's?

15% is high but honestly the Bb is not what causes the PIP, it does effect the travel of the BA and the hormone in the muscle as it is a solvent and acts as a thinner.