Winstrol Oil Recipe - NO Guaiacol/EO - HELP!

Presser is absolutely right. You will need to do this a little different that with other powders. You need to add the ingredients in this order.
Heat the BB, not hot but warm. Add the BB to the powder swirl it, then add the BA to the mix and swirl it, it will not fully dissolve. You then need to heat the solution and add the GSO. Do your filtering and add 20% more powder that you would need for the 50mg/ml ratio.

This can be tricky as there are different grades of winny powder and some will be soluble and some will not be. Some will mix well and some may just sit on top of the solvent and not mix. Just a heads up.
 
at around 18% of your total volume. Heres a recipe for you:
.6ML BA
6ml BB
1.5grams winny powder plus 20% so roughly 1.75 grams
21.8 ML GSO

Take your time and do it right
 
Powderguy said:
Presser is absolutely right. You will need to do this a little different that with other powders. You need to add the ingredients in this order.
Heat the BB, not hot but warm. Add the BB to the powder swirl it, then add the BA to the mix and swirl it, it will not fully dissolve. You then need to heat the solution and add the GSO. Do your filtering and add 20% more powder that you would need for the 50mg/ml ratio.

This can be tricky as there are different grades of winny powder and some will be soluble and some will not be. Some will mix well and some may just sit on top of the solvent and not mix. Just a heads up.
Click to expand...


Yeah I have seen micronized Stanozolol and just regular , I always guessed Micronized just meant it was finer????
 
Stan, usually comes in a powder form (if its good grade) micronized is a crystalline form that is specifically intended for a suspension. The powder form can be used for both and is a very fine powder so it must be made into any solution a little at a time, because once it clumps its a pain in the ass.

Micronized is a mix between a look of flour and table salt.It has larger granules
HR standard is a very fine powder that has a crystalline look to it.
I wish I could post pics for ya guys but I don't put that shit on my laptop for any reason..lol
 
Done! thanks PowderGuy, what i do:

Heat a bit 20g Winny + 70ml BB, later add 10ml BA
Add GSO, and heat it up to 160-200C
I got a clean solution (like a 10% of powder not dissolve)
Filter it in Coffee papper filter, and now i go use .22 nylon whatman, wanna filter 2x or 3x

Thanks in adv !
 
UltraLander said:
Done! thanks PowderGuy, what i do:

Heat a bit 20g Winny + 70ml BB, later add 10ml BA
Add GSO, and heat it up to 160-200C
I got a clean solution (like a 10% of powder not dissolve)
Filter it in Coffee papper filter, and now i go use .22 nylon whatman, wanna filter 2x or 3x

Thanks in adv !
Click to expand...

For every 10mls
.2 BA
2ml BB
If you add more than that it will be painful and stan already has a bite to it in the muscle, anyone who has used water based can attest to this.
You appear to be making enough for a small army.
 
yeah Presser, an order is close to arrive and i am gonna try yo brew winny. Is gonna be the first time i will do it and i i needed a recipe after saw all the problems that people seems to have with winny in oil or water. I really hope this recipe will work
 
well, i followed the recipe about winny in oil and i had to heat it enough, 160-200C to get a liquied clear cristal solution, i leave it warm a little bit to be able to filter and now it become like a cream, hehehehe. I tried 100ml with 2ml BA and 20BB, and 73ml GSO, but without success. Any idea to solve this?

Thanks!!
 
Giru said:
well, i followed the recipe about winny in oil and i had to heat it enough, 160-200C to get a liquied clear cristal solution, i leave it warm a little bit to be able to filter and now it become like a cream, hehehehe. I tried 100ml with 2ml BA and 20BB, and 73ml GSO, but without success. Any idea to solve this?

Thanks!!
Click to expand...

what mg per ml were you trying to make brutha? I've used 50mg stanozolol in oil with great success, it was smooth as fuck, and never crashed, i never seen nor used Winstrol in oil at any higher of a dosage than the 50mg/ml though
 
the same bro, 50mg/ml, i used 2ml BA, 20ml BB, and 73ml of GSO for 5gr of stanozolol. At this moment is completly like a paste/cream, maybe caistor oil or mct would save the problem??Or maybe adding some EO and lowering a little bit the dose?. The thing is that when is warm is a cristal solution, but when i leave to cool to after filter it, is when it crashes :(
 
Hi bros,

I want make winny oil, but I dont want make with guayacol.

you know, can I change 15% guayacol by 15% peg 300?

thanks
 
i am not sure but peg 300 is to do the winny is suspension. I did 2%BA, 20% BB and GSO and it crashed, but some people advice me to use EO with GSO to make winny in oil and it will not crash. I've just ordered it and i will add a little bit. Hope it will hold :)
 
You must log in or register to reply here.

Similar threads

Silntrunin
TNE and Anadrol recipes
Replies
1
Views
296
Presser
Presser
S
Stenbolone acetate recepie
Replies
3
Views
449
Presser
Presser
C
Need Help With Masteron 200 Recipe
Replies
5
Views
471
Unregistered
U
B
Injectable orals such as var, tbol, dbol, drol in oil with out any harsh solvents and the basics of possible, even if low dose
Replies
2
Views
351
Presser
Presser
F
Primobolan
Replies
0
Views
155
Franky
F
Back
Top