test base recipe

[danobot89]

I just made this recipe for test suspension in oil can some one help me out.. I let it sit for 2 hours and now its crystralizing in vial here is my recipe that i used.

oil 66.66ml 50% GS 50% EO
powder 10grams
ba 6ml
bb 54ml

can someone help me out on how to get rid of it crystalizing.Or someone have a different recipe.

 

[samax64]

Bro test base can't be made like that that I know of, but you could try to re heat it make sure to put a pin in it to relive the pressure

 

[irishpride]

--------------------------------------------------------------------------------

Painless Test Base Conversion

1) 10grams of Test no ester
2) 10ml BA
3) 10ml BB
4) 70ml peg

Measure the powder out to 10.0 grams pour in a beaker or vial, which ever you choose. Mix BA,BB and peg with the powder. Then you heat the solution until all the powder is dissolved. Then you filter it in a sterile vial and let cool. I have filtered when hot and cool and it flows easier while it is warm than cool. After it cools down you are ready to inj. a painless Test suspension.

makes 100ml @ 100mg/ml

 

[irishpride]

http://board1.mantisforums.com/upload/showthread.php?t=27885

 

[danobot89]

Thanks for the info but what peg should i use?

 

[danobot89]

so there is 300.400,600 what do you recommend

 

[samax64]

--------------------------------------------------------------------------------

Painless Test Base Conversion

1) 10grams of Test no ester
2) 10ml BA
3) 10ml BB
4) 70ml peg

Measure the powder out to 10.0 grams pour in a beaker or vial, which ever you choose. Mix BA,BB and peg with the powder. Then you heat the solution until all the powder is dissolved. Then you filter it in a sterile vial and let cool. I have filtered when hot and cool and it flows easier while it is warm than cool. After it cools down you are ready to inj. a painless Test suspension.

makes 100ml @ 100mg/ml

have you tried this with that much peg and BA it seem like it would be a killer is so and it is pain less would it work for win you think

 

[mmafighter]

Has anyone actually tried this method, ive been searching and this is the recipe that keeps popping up on the boards but no one seems to have actually tried it.

I cant imagine 10% BA with peg being painless???

 

[le-chef]

10% is painfull when injecting believe me, specially when you must inject everyday it will turn out to be a very short cycle.
i have made it oil base and water based both where nice and good to inject.

 

[Presser]

just found this and know we had someone asking recently bump

 

[Doctormotiv8or]

I would love some input on this as well as I have tried about 6 different recipes on this with in the last 2 months and well I can tell you in oil it usually crashes, but water base is the way to go and it seem every time I use water recipes there is always about 100-200 mg of test left in the bottle and cant be pulled into the syringe. I am surprised that no one wants to share how to make batches of test suspension like it is a big secret. I mean I can agree to a certain point to keep it on the hush to a point. PM me if you have a true and tried Test suspension recipe.

 

[Presser]

I would love some input on this as well as I have tried about 6 different recipes on this with in the last 2 months and well I can tell you in oil it usually crashes, but water base is the way to go and it seem every time I use water recipes there is always about 100-200 mg of test left in the bottle and cant be pulled into the syringe. I am surprised that no one wants to share how to make batches of test suspension like it is a big secret. I mean I can agree to a certain point to keep it on the hush to a point. PM me if you have a true and tried Test suspension recipe.

did you ever find one bro, we have loads of them inhere

 

[Doctormotiv8or]

I'm pretty sure I have tried them all. I think most recipes on here are just repost of others that people haven't actually tried. It's a shame lol. As for everything else I'm solid but water base ( thumbs down)


People who think they know everything are a great annoyance to those of us who do.

 

[BkMothaFuka]

Why does one need peg? I don't feel like ordering more shit.

 

[Doctormotiv8or]

--------------------------------------------------------------------------------

Painless Test Base Conversion

1) 10grams of Test no ester
2) 10ml BA
3) 10ml BB
4) 70ml peg

Measure the powder out to 10.0 grams pour in a beaker or vial, which ever you choose. Mix BA,BB and peg with the powder. Then you heat the solution until all the powder is dissolved. Then you filter it in a sterile vial and let cool. I have filtered when hot and cool and it flows easier while it is warm than cool. After it cools down you are ready to inj. a painless Test suspension.

makes 100ml @ 100mg/ml

My dog tried this and it is a botched recipe. Also tried doing

10 grams powder
18 Ml BB
3 ml Ba
69 peg 300

Botched recipe.

Neither work.


People who think they know everything are a great annoyance to those of us who do.

 

[BkMothaFuka]

Ok so what's the correct way

 

[Doctormotiv8or]

Deleted

 

[Powderguy]

Im working on one, I will let you know if I get it to work right. Im on my 3rd try. Like I stated in the other TNE posts I dislike suspensions they are a pain in the ass to work with.

 

[Userat204]

Test suspension 20ml@ 100mg/ml.

I believe this is the way I use to make it abd it held in a nice white suspension without any separation and flowed nicely. I'm taking numbers off the top of my head right now so it may need minor tweaks

15 ml bac water in a sterile vial.
In a non sterile vial:
3.6ml bb
.25 polysorbate 80 (surfactant)
.35ml to .5 ml guaiacol.
2 g test base.

If too high on the ps80 it will look like gunk and fall to the bottom. I will heat the vial with my solvents and raw until liquid. I turn the temp down keep the liquid warm but not so hot that it burns the filter. I use a .45 on this. Also I use a 3rd vial. This 3rd vial is simply to set your syringe filter and 18g pin in while shaking the sterile vial to help prevent any liquid in it from crashing and making the filter useless.

I filter to I S his typically at 1 or 2 ml at a time. I will push the 1 - 2ml thru my filter into the water in my sterile vial, I detach the filter and set that on my 30ml vial that's warming on the burner which keeps the filter housing warm enough to prevent a liquid in it from crashing. I immediately put a stopper on my sterile vial that I just filtered my 2ml into and shake vigorously for about 20 to 30 seconds. I also let the liquid vial go back on the hear periodically. And I continue in this fashion until it's finished. It's important to filter 1-2 ml only at a time and shake immediately after for a good 20 seconds. If u try 1 ml the first time u attempt to filter nothing will come out so I use 2ml the first time and try to use 1 ml the rest of the time. If u keep the filter warm you should be able to do 2 x 20 ml vials per filter.

It's not the fastest method and again I pulled those numbers off the top of my head. I think the bac water was supposed to be something like 13.75ml , 3.6 ml bb, .6ml ps80, and .5ml guaiacol. But it seems to me like the .6 ps80 was slightly too much. I think either will work but now that I think about it I'm pretty sure the bottom numbers are more likely right but it's to late for me to add it all up. Do the numbers work out 100% perfect probably not but close enough for a small amount. I will have more. Guaiacol tomorrow I believe and I'll see if I can get one Madd up and post a pic. I know it's painless and smooth.

 

[beeflover]

IN OIL NOT WATER