Problem with orals.

BkMothaFuka

New member
So in the past I have just thrown powder in oil and shook well before each use and it turned out to be accurate enough while all the powder was floating evenly.
This time I tried to use 12.5 mg of aromasin per ml in 100ml of grape seed oil. its clumping up and like snow flakes and its making it hard for me to believe it will be accurate. I tried heating it under really hot water. Any thing else I can do? I was thinking of putting a little metal washer or something in there to crush the chunks? any better ideas? Viagra is clumping somewhat as well. thanks.
 
why are you using oil at all? just use water and alcohol solution and it blends nice and even when shaken. i never heard of anyone using oil for an oral. and the ever clear / water mixture is smooth as can be brutha for both your aromasin and viagra powder and many other powders it works great for
 
Thanks bro. Years ago on ology that's what people used. It didn't hold for more than a few seconds but it worked.
Where do I get ever clear and can you be more specific in how to do it or point me to a thread. Luckily I only wasted like 12 grams of aromasin. Maybe I will put it in the blender to save this batch lol.
I appreciate the help.
 
Ever clear at liquor store then mix 50-75 ml ever clear with 400ml of water and shake! Then you can use that solution to pour into and on top of powder. So weigh out your powder and put it into say a 30ml dropper bottle then add ur liquor water mixture . Real easy and works great
 
pressers advice is right on just use the highest proof alcohol, everclear or bacardi 151 unless you can get some shine.

it should work fine you can heat it a little if you would like to see if it will stay in solution but most likely it wont and it's a suspension.
 
Ever clear at liquor store then mix 50-75 ml ever clear with 400ml of water and shake! Then you can use that solution to pour into and on top of powder. So weigh out your powder and put it into say a 30ml dropper bottle then add ur liquor water mixture . Real easy and works great

I'm not understanding the whole concentration part and how much it would hold and how to choose the dosage per ML. So if I wanted to make say 50 mg Dbol? And I had 5 grams of powder, how would I go about doing that? Thanks. I also assume the liquor store will have something literally called "ever clear"? I remember years ago I had to buy something else close. Thanks for the hand holding.

Also on a different note. Any way to save this snow glow of oil that I made? The Viagra works well enough to get by. The Tbol and novla work perfect. But the aromasin is like random snow flakes. I have to go look up the price of aromasin. Maybe I will just throw out the aromasin depending how much I paid for it.

Edit: the aromasin was like 15 so I'm just gonna throw it out thanks. So I guess please just tell me the idiots or super idiots version of how to make the aromasin at 12.5-25 a ml in ever clear or Bacardi? Thanks also other orals higher dosed would be good as well, like Dbol and Tbol thanks
 
I'm not understanding the whole concentration part and how much it would hold and how to choose the dosage per ML. So if I wanted to make say 50 mg Dbol? And I had 5 grams of powder, how would I go about doing that? Thanks. I also assume the liquor store will have something literally called "ever clear"? I remember years ago I had to buy something else close. Thanks for the hand holding.

Also on a different note. Any way to save this snow glow of oil that I made? The Viagra works well enough to get by. The Tbol and novla work perfect. But the aromasin is like random snow flakes. I have to go look up the price of aromasin. Maybe I will just throw out the aromasin depending how much I paid for it.

Edit: the aromasin was like 15 so I'm just gonna throw it out thanks. So I guess please just tell me the idiots or super idiots version of how to make the aromasin at 12.5-25 a ml in ever clear or Bacardi? Thanks also other orals higher dosed would be good as well, like Dbol and Tbol thanks

ok if you have an empty Pint water bottle, the plastic little water bottles, you pour 1/4 of the bottle up with ever clear, then fill the other 3/4 up with water! shake it well, now thats your solution you can use to make many oral bottles of whatever you want.

So buy yourself a 100ml empty dropper bottle or vial from research supply place. Pour your entire 5 grams of Dianabol powder into the empty 100ml vial/dropper bottle. So that 5 grams is the same as 5,000mg. Then fill the rest of the vial or dropper bottle up with the water / alcohol solution you made in the pint bottle, just squirt the solution into the 100ml vial that has the 5grams powder in it, fill the vial/bottle up to the top which is 100ml if filled up to close to the top. Then shake the shit out of it every time you wanna use it!

So now you have 5,000mg in 100ml of water/everclear mixture. The math is 5,000mg divided by 100ml = 50mg/ml ……..VOILA!
 
Thanks man I get. So it should hold but sometimes it doesn't? I wasn't expecting it hold at that high of a concentration.
I would rather use an empty 100 ml vial and draw up with everclear and water if that's okay? Does it sound right? It will hold on solution with out heating?
 
Thanks man I get. So it should hold but sometimes it doesn't? I wasn't expecting it hold at that high of a concentration.
I would rather use an empty 100 ml vial and draw up with everclear and water if that's okay? Does it sound right? It will hold on solution with out heating?

i have no clue what ur saying bro, all i know is i explained it as best i can, and its extremely simple to do brutha, so hopefully you get it figured out
 
No you can't just dump the powder into 100ml cause then you'd have much more then 100ml, you need to account for the volume of powder. You need to have a 100ml line marked off on the vial or whatever you make it in. Then put the powder in, then your solution, and fill it up to the 100ml line. Then shake and use. It won't be 100ml solution , which is why you need to know where to fill it up to at your 100ml line
 
Ok so I fill the bottle with a 100 ml of liquid to mark off what 100 ml looks like. I then dump out the liquid. But now in have a 100 ml marked to account for displacement.
How do I know how much water water to add to the ever clear? Once I figure it out...... Then

I put 5000mg of Dbol into the empty vial and then add the mixture of ever clear to marked line, correct?
Do I have to hear or anything?

Again why do I need to add water? and how much ? Thanks
 
Ok so I fill the bottle with a 100 ml of liquid to mark off what 100 ml looks like. I then dump out the liquid. But now in have a 100 ml marked to account for displacement.
How do I know how much water water to add to the ever clear? Once I figure it out...... Then

I put 5000mg of Dbol into the empty vial and then add the mixture of ever clear to marked line, correct?
Do I have to hear or anything?

Again why do I need to add water? and how much ? Thanks

yes bro you have it!!! And you will need to add water to the ever clear cause that shit is strong as fuck, it needs to be diluted! So again in an empty pint bottle (water bottle ) , fill the bottom 20-25% of the pint bottle up with ever clear, then fill the rest with water,. Thats your solution you use to pour onto your powder!

You are all set bro! sound like u have it!
 
Thanks bro I got it. So I end up with a pint total with 75% regular water and no heating Necessary. And this will hold 50 mg Dbol per ml.
With it hold all other orals at this mg? Will it hold aromasin at 25? Thanks
 
Back
Top