Giant thighs begin with squats

DefMetalLifter

MuscleChemistry Registered Member
The evolution of modern bodybuilding equipment and gyms has created a paradox. On one hand, it has allowed us to move quickly and easily from one exercise to another; the machines have eliminated the tedious tasks of breaking the bar down after the exercise. However, excessive use of the machines, especially for the lower body, robs the bodybuilder of a structural mass base from which to refine for competitive purposes. Freaky thighs with mass emanating from every fiber are not built on leg extensions alone.

Rather, some form of barbell squats is the best strategy to obtain gargantuan thighs. Squats not only add to the mass and depth of the anterior thigh muscles. The gluteal muscles, smaller hip muscles, lower and middle back, hamstrings and even the calves are all activated to some extent during this exercise. Does this mean that to have great thighs like Jay Cutler you must possess a sadistic gene that pushes you through the pain barrier toward exhaustion on every set? Probably not, but, gut-busting work is necessary to maximally enlarge the thighs and there is no better exercise than barbell squats.

Structure and Function
Even though the squat involves many muscles, the intent of this article is to focus on the muscles of the anterior thigh, which together are called the quadriceps femoris muscle group. The quadriceps femoris ("quads") is a group of four muscles that covers the anterior and lateral parts of the femur bone of the thigh. The three vasti muscles take their origin from the respective part of the femur; the vastus lateralis muscle from the lateral part of the femur; the vastus medialis from the medial part of the femur; and the vastus intermedius from the central, anterior part of the femur. As a result, the vastus lateralis muscle is positioned on the lateral (outer) part of the thigh and the vastus medialis covers the medial (inner) part of the thigh. The vastus intermedius is located intermediate and deep to the vastus lateralis and the vastus medialis muscles. The tendon from the vastus lateralis combines with the tendons from the other two vasti muscles and the tendon of the rectus femoris to form the quadriceps tendon. The quadriceps tendon attaches to the patella (kneecap) and continues inferiorly (toward the foot) from the patella, where it's called the patellar ligament. The patellar ligament inserts into the tibial tuberosity, a bumpy portion on the tibia bone of the lower leg.

The rectus femoris (rectus=straight) is the fourth muscle in the quadriceps group. Unlike the vasti muscles, it begins on the hipbones at the iliac crest and above the socket where the head of the femur sits (acetabulum) in the hip. Its fibers run straight down from the hip to the knee. The tendon of the rectus femoris joins the tendons from the three vastus muscles to attach to the patella. Together, the three vasti and the rectus femoris form the only real manner we have for extending the leg at the knee. The rectus femoris is much weaker when the hip is flexed (e.g., seated position, such as during leg extensions).

Barbell Squats in a Power Rack
1. Position your squat bar on the support bar in a power rack. The bar should be about mid-chest level when you're facing it. Warm your knees up with lighter weights in the early sets and save the heavy stuff for the final three or four sets. Set the height of the lower safety bar of the power rack about two inches lower than the bottom position of your squat.

2. You may find that the heavy barbell will be very uncomfortable (even painful) as it rests on your upper trapezius, and this will detract from your ability to concentrate on your quadriceps muscles. Most gyms will have a bar pad you can wrap around the middle sections of the bar before setting up for the squat. Alternatively, you can wrap the center of the bar with a towel, or place the towel across your upper trapezius so the bar will rest on the towel. If you wrap the bar, be certain that it will not loosen during your set.

3. Grip the bar firmly with a wide grip. Place your head under the bar and bend your knees slightly. Position the wrapped bar high across your shoulders and the upper trapezius muscles (but not on your neck).

4. Keep your head up and tighten your back. Place your feet about shoulder-width apart. Lift the bar from its starting position on the power rack (do not jerk the bar) by extending (straightening) your knees. Make sure you have full control of the weight before moving into position.

5. Take one step backward, just enough to clear the upper rack supports, so you will not hit it during the exercise. Place your feet a little wider than shoulder width with your toes pointed slightly outward. Keep your head up and your back straight and tight, but maintain its natural curves. Again, make sure you're in control of the weight, not the reverse, before beginning the squat.

6. Control the weight as you slowly lower your buttocks toward the floor by allowing your knees to flex. Continue squatting downward until the tops of your thighs are parallel to the floor, or when your knee angle has reached 90 degrees.

7. The lowest safety bar on your squat rack should have been set so that it does not contact the barbell at the bottom of the squat. Nevertheless, it should be high enough to "catch" the bar without excessive knee flexion if, for some reason, you fail during the set. It's best to have a spotter to help you on the heavy sets, but even spotters can mess up. Therefore, it's important to have properly positioned the lowest safety bar of the power rack before beginning your set.

8. Never bounce into or out of the bottom position. Such sloppy lifting will only result in injured knees, not giant thighs. After you have reached the bottom, stand up in a smooth fluid movement. Stop just short of fully locking out your knees, thereby maintaining the tension on the anterior thigh muscles. Keep your back tight and flat and your head up on the way up and on the way down.

Important Tips
All four quadriceps muscles are strongly activated during the ascent. However, the relative degree of muscle activity differs among these muscles. The tension in the vasti muscles diminishes as you approach the top portion of the lift (with knees straightened). Conversely, the rectus femoris is less active at the bottom (flexed knee and flexed hip position) but becomes more activated when the hip and knee are being extended. Since the gluteus maximus muscle is such a strong extensor of the hip, it's very active during the ascent of the squat. The hamstring muscles can also be activated, particularly since they also act to extend the hip. The erector spinae muscles achieve a moderate isometric contraction during the lift to keep the back flat.

By keeping your head up when squatting, you'll ensure that your back is straight and flat. Excessive forward flexion of the torso will allow you to lift a little more weight, but it's done with the back extensors and gluteal muscles rather than your quadriceps. Bending forward also increases the risk of lower back injury. While a little hip flexion is reasonable during squatting, this should not be excessive. After all, you are not trying to be a powerlifter, but a bodybuilder who is concerned with developing quadriceps mass.

Some preferential muscle development in one or both of these areas is possible with squats, but the very similar anatomical positioning makes such specialization difficult. For example, if you bring both feet close together with toes pointing slightly inward (thus, a medial rotation of the hips, which brings the knees close together), the vastus lateralis will achieve a slightly greater activation because of an increased stretch on this muscle during contraction.

This will accentuate the lateral "sweep" in your thighs. A wider foot placement and especially pointing the toes outward (lateral rotation of the knee and hip) will increase the preferential contractile activity of the vastus medialis, thereby accentuating the "tear drop" above the medial side of the knee. Because the rectus femoris and vastus intermedius insert in the middle of the patella, variation in foot stance will have no effect on the activation of these muscles.

Often, good bodybuilders can approach leg training thinking they can only be successful if they are crawling out of the gym after the squats are completed. Usually, this defeatist philosophy results from improper exercise form (e.g., bending forward, lifting too much weight sloppily, lack of concentrating on the quadriceps). Sure, you must train heavy, but you must also feel the weight and concentrate on your quadriceps during the exercise. It is not necessary to start with the mindset that squats must be so exhausting that the cardiology team must be notified at the end of your sets. Rather, think "quads" during your squats, but don't focus on exhaustion. This will result in an immediate difference in your squats and a huge difference in approaching giant size and the responsiveness of your quads.

Reference List
Earl JE, Schmitz RJ and Arnold BL. Activation of the VMO and VL during dynamic mini-squat exercises with and without isometric hip adduction. J Electromyogr Kinesiol 11: 381-386, 200
Jones K, Bishop P, Hunter G and Fleisig G. The effects of varying resistance-training loads on intermediate- and high-velocity-specific adaptations. J Strength Cond Res 15: 349-356, 2001.
Moore, KL and AF Dalley. Clinically oriented Anatomy. Fourth edition. Baltimore, Lippincott Williams & Williams, 531-546, 1999.
Rahmani A, Viale F, Dalleau G and Lacour JR. Force/velocity and power/velocity relationships in squat exercise. Eur J Appl Physiol 84: 227-232, 2001.
Rasch, P.J. Kinesiology and Applied Anatomy. 7th edition. Philadelphia, London. Lea & Febiger, 1989, pp. 117-120.
Wallace DA, Salem GJ, Salinas R and Powers CM. Patellofemoral joint kinetics while squatting with and without an external load. J Orthop Sports Phys Ther 32: 141-148, 2002.
 
Back
Top