PDA

View Full Version : crystals or fiber in filtered product



Powderguy
12-04-2014, 04:43 PM
I wanted to ask you guys if you have seen fibers or straight crystals in your finished filtered product of homebrew?
I was sent some pics and see it closely after I enlarge it that it looks like fibers (clear) or crystals in solution but its not separated.
Has anyone had this happen with filters or familiar with it? I have not seen this but I do not make high mg/ml ratios.
this is NPP at 300mg/ml it looks clear but has what looks like clear fibers floating around in solution..

Presser
12-05-2014, 07:25 AM
I wanted to ask you guys if you have seen fibers or straight crystals in your finished filtered product of homebrew?
I was sent some pics and see it closely after I enlarge it that it looks like fibers (clear) or crystals in solution but its not separated.
Has anyone had this happen with filters or familiar with it? I have not seen this but I do not make high mg/ml ratios.
this is NPP at 300mg/ml it looks clear but has what looks like clear fibers floating around in solution..

nope never seen anything like this, I would trash the shit

BuryMeBig
12-05-2014, 10:17 AM
nope never seen anything like this, I would trash the shit

no need to trash it bro run it through one more time .45um should do it, if your going to use it or not id still filter it once more to see wtf.... what'd you filter it through? PVDF? thats why I only use PTFE man...

BuryMeBig
12-05-2014, 10:21 AM
if you heat it up what happens? are the particles or crystals, which ever or what ever you truly believe they may be, still visible?

Presser
12-06-2014, 03:11 PM
no need to trash it bro run it through one more time .45um should do it, if your going to use it or not id still filter it once more to see wtf.... what'd you filter it through? PVDF? thats why I only use PTFE man...

your probably right brutha, but I've been hospitalized for a week, literally 6 nights 7 days, with an abscess that nearly killed me, my own fault for letting it go so long trying o wait it out and it got worse, but for me, I'm probably over cautious when it comes to this stuff. If i see a single floaty, that shit is trash lmao, but your probably right brutha,

Powderguy
12-06-2014, 10:36 PM
Yeah I talked to him. He said when its heated it completely dissolves and returns to solution no crystals or floats.
Presser im with you bro, I do the same thing. He made 200mg/ml NPP and that has to be strong. Mine has only ever been 100.
If its dissolving in heat then its supersaturated then and im sure it will cause some PIP.
H

He did say it was a whatman.25 sterile pvdf filter.He said he started with a whatman .22 sterile PTFE and the second filter was.25 pvdf. Still when its heated the crystals dissolve?

THE 67
12-08-2014, 11:35 PM
INTERESTING POWDER... IVE HAD FIBERS IN MY BREW AS WELL.. BUT WHEN I REALIZE THT IT WAS BECAUSE I WAS WIPING MY GLASSWARE WITH PAPER TOWELS AFTER STERILIZATION .. I STOPPED .. LMAO.. ROOKIE MOVE A LONG TIME AGO... BUT IVE NEVER HAD THT PROBLEM.. I KNOW THT THE PTFE MEMBRANE FILTERS ARE EXTREMELY DURABLE TO HIGH HEATS... IT AUTOCLAVES @ 140C I BELIEVE...

I HAVE HEARD THT THE SYRINGE FILTERS ARE NOT THT DURABLE TO HIGH HEAT AND VERY FRAGILE WHEN IT COMES TO FILTERING .. IT COULD BE FIBERS FROM MEMBRANE INSIDE THE SYRINGE FILTER..

Presser
12-09-2014, 08:32 AM
INTERESTING POWDER... IVE HAD FIBERS IN MY BREW AS WELL.. BUT WHEN I REALIZE THT IT WAS BECAUSE I WAS WIPING MY GLASSWARE WITH PAPER TOWELS AFTER STERILIZATION .. I STOPPED .. LMAO.. ROOKIE MOVE A LONG TIME AGO... BUT IVE NEVER HAD THT PROBLEM.. I KNOW THT THE PTFE MEMBRANE FILTERS ARE EXTREMELY DURABLE TO HIGH HEATS... IT AUTOCLAVES @ 140C I BELIEVE...

I HAVE HEARD THT THE SYRINGE FILTERS ARE NOT THT DURABLE TO HIGH HEAT AND VERY FRAGILE WHEN IT COMES TO FILTERING .. IT COULD BE FIBERS FROM MEMBRANE INSIDE THE SYRINGE FILTER..

wtf is that chinese shit lmao, autoclaves and membrane filters lol, geeeesh, I'm a simple man, gimme a needle and a bottle of juice and I'm good lol

Powderguy
12-09-2014, 08:55 AM
wtf is that chinese shit lmao, autoclaves and membrane filters lol, geeeesh, I'm a simple man, gimme a needle and a bottle of juice and I'm good lol

lol I know right..

So its a high concentration of NPP. I went and saw it for myself. When I heat it it becomes crystal clear, when it cools it becomes sludge. Strangest shit I have ever seen. I have had some issues with NPP at high mg concentrations but not at 200mgs.
Its not fibers from filters, its crystalline and when heated it completely dissolves.

beeflover
12-09-2014, 09:45 AM
Got the little pub hair thing before 50 vials 1 had this had to go threw hole folter process again .
shithad me pissed !!

THE 67
12-09-2014, 12:32 PM
wtf is that chinese shit lmao, autoclaves and membrane filters lol, geeeesh, I'm a simple man, gimme a needle and a bottle of juice and I'm good lol

i wish tht it was tht easy at time presser.. im as u.. a simpke man just wanting the best gear brewed... lol

BEASTZ6
02-21-2015, 06:35 PM
i have had swirls in my filtered gear, but that's about it. I just reheat and shake it a little until the finished product is swirl free.

Powderguy
02-22-2015, 02:59 PM
Yeah this was just a high concentration with very little solvent. I must say it turned out great at 200mg/ml NPP

BuryMeBig
02-23-2015, 02:21 AM
Yea believe me im a freak about my shit too hahahaha trust me, I buy filtered USP oil usually only. Even then I filter my oils, my solvents, co's all individually prior to even mixing them and filtering through the .22um for its final filtering. Nothing wrong with being over cautious, people can sit here and tell me all they want, Why would you filter again when blah blah blah.... Listen... Save it... It's my gear, there my filters, my money, and at the end of th day, ITS MY HEALTH, I'll filter all I want DONT waste your time trying to tell me I should only do what you do... We all do as we please... And if Im a bit more generous on the filtering, don't worry about me... There's plenty of other threads with important questions that need to be replied to, so utilize the effort you put into telling me, and go answer some questions lol.... As I filter for the 3rd time thanks. Hahahaha

Anyhow, yea man if I could hae seen a picture im sorry brother, I would have def. Told you it was actually crashing and not infact fibers. You hit it dead on though I got to say because for future reference for those who read though this, that is EXACTLY what gear that's BAREEEELY crashed will exhibit, little fine crystals that look just as if they are fibers of like dust, lint... Yarn... To rule out its not any of those lol, heat that baby up in whatever means you choose, and see if they disparate. If not then fine... Maybe it is a contaminant, but even then, just refilter through a .22 and itll def. Stay behind. Cheers Brotha! Stay anal, for at the end of the day, it's your health, not Mr. Ignorant asshole's convincing people of doing less right? Haha cheers!

Powderguy
02-23-2015, 08:11 AM
Yea believe me im a freak about my shit too hahahaha trust me, I buy filtered USP oil usually only. Even then I filter my oils, my solvents, co's all individually prior to even mixing them and filtering through the .22um for its final filtering. Nothing wrong with being over cautious, people can sit here and tell me all they want, Why would you filter again when blah blah blah.... Listen... Save it... It's my gear, there my filters, my money, and at the end of th day, ITS MY HEALTH, I'll filter all I want DONT waste your time trying to tell me I should only do what you do... We all do as we please... And if Im a bit more generous on the filtering, don't worry about me... There's plenty of other threads with important questions that need to be replied to, so utilize the effort you put into telling me, and go answer some questions lol.... As I filter for the 3rd time thanks. Hahahaha

Anyhow, yea man if I could hae seen a picture im sorry brother, I would have def. Told you it was actually crashing and not infact fibers. You hit it dead on though I got to say because for future reference for those who read though this, that is EXACTLY what gear that's BAREEEELY crashed will exhibit, little fine crystals that look just as if they are fibers of like dust, lint... Yarn... To rule out its not any of those lol, heat that baby up in whatever means you choose, and see if they disparate. If not then fine... Maybe it is a contaminant, but even then, just refilter through a .22 and itll def. Stay behind. Cheers Brotha! Stay anal, for at the end of the day, it's your health, not Mr. Ignorant asshole's convincing people of doing less right? Haha cheers!

Thanks bro, I appreciate the advice. I have been doing this a very long time and have never ever had that happen but we all have a first time for everything. I filter mine over and over as well. I take no risks but had to share that it was like this, as I have never experienced it before.
Its finally stable and Io sent a sample to be tested, tested at 212mg/ml. I figured it crashed because I go 20% over on my concentrations due to double filtering and heating. NPP cannot be in high mg/ml rations and it is a lot like prop to inject but only lasts a day with PIP.

Thanks for your input.

BuryMeBig
06-01-2015, 01:30 AM
Thanks bro, I appreciate the advice. I have been doing this a very long time and have never ever had that happen but we all have a first time for everything. I filter mine over and over as well. I take no risks but had to share that it was like this, as I have never experienced it before.
Its finally stable and Io sent a sample to be tested, tested at 212mg/ml. I figured it crashed because I go 20% over on my concentrations due to double filtering and heating. NPP cannot be in high mg/ml rations and it is a lot like prop to inject but only lasts a day with PIP.

Thanks for your input.

Never seen that in any of your brews huh? haha impressive... I've only been brewing for a few months now so im just actually learning the whole process.... Would love to see those results, who'd you send your gear off to that reported 212mg?

Powderguy
06-01-2015, 08:41 AM
I cant state openly who did the testing but they did the same testing for *the steroid bible* articles and helped to determine fakes.

All the above has been used and it was great. The first time I have ever seen crystals in my solutions. I tried to supersaturate the NPP and get the most out of it. The phenyl ester doesn't like saturation and I had to lessen the potency with a thinner not a preservative.

miller251
06-01-2015, 09:29 AM
I had crystals in my npp when I made it at 250 mg/ml it would hold for a few days and then completely crash especially in the cold weather. I reduced it to around 125 mg/ml and it held a lot better after refiltering. The only time I see crystals in it is if i leave it in a cold place and it rarely happens.

Powderguy
06-01-2015, 10:17 AM
Mines holding at 200 with apricot oil, BB and BA. 11% and 1.5% ratio

miller251
06-01-2015, 10:55 AM
Mines holding at 200 with apricot oil, BB and BA. 11% and 1.5% ratio
I wish I of used a different oil instead of gso. I used 2% ba and 18% bb (I think)

Powderguy
06-01-2015, 11:48 AM
Whats your volume?

GSO is fine with that much BB it creates a thin enough product. The BA content may be high depending on the total volume. Mine is 50mls with what I mentioned.

miller251
06-01-2015, 03:05 PM
I think I originally made 200ml but it kept crashing so i altered it. This was last year sometime and was my first npp brew. Some how in the end I ended with 300 ml npp. Tbh it was last year.

Powderguy
06-01-2015, 05:03 PM
lol ok..have you used it yet?

miller251
06-01-2015, 06:03 PM
Yeah I use it and since I cut it down It's ok. No crashes and no pain

miller251
06-01-2015, 06:12 PM
I think next time I try npp I won't try to do so much all I once. I had 50g powder and tried to make it all at once. Originally I asked for deconate but got sent npp by time I realised It was too late and already made a high concentration. Hence the crash.

Powderguy
06-02-2015, 07:44 AM
Honestly I like NPP over Deca.

miller251
06-02-2015, 10:36 AM
I totally agree I won't use deconate again.