PDA

View Full Version : Winstrol Oil Recipe - NO Guaiacol/EO - HELP!



UltraLander
12-16-2014, 10:11 PM
Who can help me ?

can i use only BA, BB and GSO ?

Pristi1340
12-16-2014, 11:25 PM
what strength do you plan on making it?

Presser
12-17-2014, 08:13 AM
Who can help me ?

can i use only BA, BB and GSO ?

yes you can make it in oil, painlessly with ba bb and GSO!!! best to make it at just 50mg/ml

Pristi1340
12-17-2014, 04:06 PM
yes you can make it in oil, painlessly with ba bb and GSO!!! best to make it at just 50mg/ml

Yeah, I was going to say don't even try making it at 100mg/ml lol

Powderguy
12-17-2014, 04:39 PM
Presser is absolutely right. You will need to do this a little different that with other powders. You need to add the ingredients in this order.
Heat the BB, not hot but warm. Add the BB to the powder swirl it, then add the BA to the mix and swirl it, it will not fully dissolve. You then need to heat the solution and add the GSO. Do your filtering and add 20% more powder that you would need for the 50mg/ml ratio.

This can be tricky as there are different grades of winny powder and some will be soluble and some will not be. Some will mix well and some may just sit on top of the solvent and not mix. Just a heads up.

UltraLander
12-17-2014, 10:19 PM
thanks, i wanna try it, and about BB ratio ?

Powderguy
12-18-2014, 08:06 AM
at around 18% of your total volume. Heres a recipe for you:
.6ML BA
6ml BB
1.5grams winny powder plus 20% so roughly 1.75 grams
21.8 ML GSO

Take your time and do it right

Presser
12-18-2014, 08:11 AM
Presser is absolutely right. You will need to do this a little different that with other powders. You need to add the ingredients in this order.
Heat the BB, not hot but warm. Add the BB to the powder swirl it, then add the BA to the mix and swirl it, it will not fully dissolve. You then need to heat the solution and add the GSO. Do your filtering and add 20% more powder that you would need for the 50mg/ml ratio.

This can be tricky as there are different grades of winny powder and some will be soluble and some will not be. Some will mix well and some may just sit on top of the solvent and not mix. Just a heads up.


Yeah I have seen micronized Stanozolol and just regular , I always guessed Micronized just meant it was finer????

Powderguy
12-18-2014, 08:16 AM
Stan, usually comes in a powder form (if its good grade) micronized is a crystalline form that is specifically intended for a suspension. The powder form can be used for both and is a very fine powder so it must be made into any solution a little at a time, because once it clumps its a pain in the ass.

Micronized is a mix between a look of flour and table salt.It has larger granules
HR standard is a very fine powder that has a crystalline look to it.
I wish I could post pics for ya guys but I don't put that shit on my laptop for any reason..lol

UltraLander
12-19-2014, 10:33 AM
Done! thanks PowderGuy, what i do:

Heat a bit 20g Winny + 70ml BB, later add 10ml BA
Add GSO, and heat it up to 160-200C
I got a clean solution (like a 10% of powder not dissolve)
Filter it in Coffee papper filter, and now i go use .22 nylon whatman, wanna filter 2x or 3x

Thanks in adv !

Powderguy
12-19-2014, 12:13 PM
Done! thanks PowderGuy, what i do:

Heat a bit 20g Winny + 70ml BB, later add 10ml BA
Add GSO, and heat it up to 160-200C
I got a clean solution (like a 10% of powder not dissolve)
Filter it in Coffee papper filter, and now i go use .22 nylon whatman, wanna filter 2x or 3x

Thanks in adv !

For every 10mls
.2 BA
2ml BB
If you add more than that it will be painful and stan already has a bite to it in the muscle, anyone who has used water based can attest to this.
You appear to be making enough for a small army.

Giru
10-28-2015, 11:54 AM
i will do mine soon using this recipe, i will post results :)

thanks!

Presser
10-29-2015, 08:13 AM
your winny in oil?

Giru
10-29-2015, 08:25 AM
yeah Presser, an order is close to arrive and i am gonna try yo brew winny. Is gonna be the first time i will do it and i i needed a recipe after saw all the problems that people seems to have with winny in oil or water. I really hope this recipe will work

yolo
12-01-2015, 05:25 AM
Nice post!

Giru
12-01-2015, 02:26 PM
well, i followed the recipe about winny in oil and i had to heat it enough, 160-200C to get a liquied clear cristal solution, i leave it warm a little bit to be able to filter and now it become like a cream, hehehehe. I tried 100ml with 2ml BA and 20BB, and 73ml GSO, but without success. Any idea to solve this?

Thanks!!

Presser
12-01-2015, 05:10 PM
well, i followed the recipe about winny in oil and i had to heat it enough, 160-200C to get a liquied clear cristal solution, i leave it warm a little bit to be able to filter and now it become like a cream, hehehehe. I tried 100ml with 2ml BA and 20BB, and 73ml GSO, but without success. Any idea to solve this?

Thanks!!

what mg per ml were you trying to make brutha? I've used 50mg stanozolol in oil with great success, it was smooth as fuck, and never crashed, i never seen nor used Winstrol in oil at any higher of a dosage than the 50mg/ml though

Giru
12-01-2015, 05:39 PM
the same bro, 50mg/ml, i used 2ml BA, 20ml BB, and 73ml of GSO for 5gr of stanozolol. At this moment is completly like a paste/cream, maybe caistor oil or mct would save the problem??Or maybe adding some EO and lowering a little bit the dose?. The thing is that when is warm is a cristal solution, but when i leave to cool to after filter it, is when it crashes :(

khurgan
12-02-2015, 04:16 AM
Hi bros,

I want make winny oil, but I dont want make with guayacol.

you know, can I change 15% guayacol by 15% peg 300?

thanks

Giru
12-02-2015, 05:00 AM
i am not sure but peg 300 is to do the winny is suspension. I did 2%BA, 20% BB and GSO and it crashed, but some people advice me to use EO with GSO to make winny in oil and it will not crash. I've just ordered it and i will add a little bit. Hope it will hold :)

Powderguy
12-02-2015, 10:07 AM
I see that the high BB is always an issue. I hope you home chemists know that BB is a thinner. It thins the oil and contents, it makes it lighter and it will solidify when at room temp or under no heat.

Remember that when you use BB

Presser
12-03-2015, 09:20 AM
well they know now if they didn't lol, i didn't , but kind of assumed thats what bb and ba was for, well i actually thought it was to kill bacteria and help dissolve powders, but I've never made anything other then orals and fina from pellets so I'm no genius in this department

Powderguy
12-03-2015, 11:13 AM
BA is a microbial preservative. It prevents the growth of bacteria and preserves the carrier. BB is a solvent as well but it actually thins the solution. BB is not necessary in all solutions. Its most commonly used in thicker oils like sesame and cottonseed.

Giru
02-03-2016, 08:21 AM
Well, soon i am gonna give another try to winstrol in oil and if it crashed again, i will try in water.....some advice PowderGuy?? i also has guaiacol....

thanks!

Arid
07-10-2017, 05:43 AM
at around 18% of your total volume. Heres a recipe for you:
.6ML BA
6ml BB
1.5grams winny powder plus 20% so roughly 1.75 grams
21.8 ML GSO

Take your time and do it right

The powder is not dissolving for some reason any ideas why guys thanks.

marecki_urs
07-10-2017, 07:57 AM
Propably couse winny melting point is crazy high ? What temperature do U reach doing this process ?

PezBolic
08-15-2017, 02:10 PM
If guys don't like Guiacol they can use Ethyl Lactate (Animal's super solvent). Works as good if not better. Just don't try Pheny Salicylate (it's older than aspirin).

btrep
10-09-2018, 03:31 PM
anyone have a successful recipe?
i have gso,eo,ba,bb and super solvent to use
also ps80
any help would be appreciated

shredzs
10-09-2018, 09:31 PM
Good question... Would like to know myself!