Sustanon brew painful

Brewed a batch of sustanon, first couple of injections were slightly painful but tolerable. Injected in the same vicinity as my Igf (MC... the shit) and had crippling pain. I started whinny on Monday and injected both at the same time (which I always do with no problem), WHAT A MISTAKE! I am still hurting and have a huge swollen spot the size of a grown man's hand on my glute, which also went down about a third of my outer thigh. I thought maybe it was just a reaction between the two (sus and whinny), so I tried an injection of just the sustanon in my thigh. The second day and I now can hardly walk and barley bend my leg. here is my recipe:

10g Test dec
6g Test Iso
6g Test Ph
3g Test P
3ml BA
15ml BB
71.25 GO
Everything was filtered properly with a .22um filter and all equipment was sterile. Does anyone see any problems with the recipe and is there anything I can do to fix the problem. I also want to add that when I did a melting point test the Test PH and the Test were about 20 degrees Celsius off. They both melted around 96 degrees. I did a lab max test after and definitely tested as Sustanon.

dang. Sorry bro.

Your mix sounds ok. Thats about 3% on the BA? A bit strong, but unlikely to cause the pain.

Maybe it's your reaction to to Sustanon... Have you pinned pharma grade before? Some people just react badly. Have you pinned GO (grapeseed oil?) before? Again some react badly.

I hate sustanon anyhow, makes me feel like shite. Plain old cypionate for me.

I love sustanon, and have pinned G.O. before. I was hoping it was something i did wrong but i think it has something to do with the purity of the test ph or test d. I made a batch of test e from same source and everything was good, a little pain but normal and tolerable.

Sust is usually always painful due to the amount of esters. 1.9% max BA is recommended.

Looks like you did roughly 115ml. you used 71 ml of oil and 3ml ba and 15 ml bb-the ba could have been 1.9 mls and the bb could have been reduced to 10-11mls.

When you made it did you do the solvents or oil heated?


I still believe its all the esters and you are actually dosing higher amounts than you expected due to the volume.

I dissolved the powder, then added the solvent. Next i added the oil (non-heated) to the mixture while heating and stiring on my magnetic stirrer. I heated at about 220 degrees for about 20 mins. Let it cool a bit ( till warm) and filtered. Let sit over night and the mixture was just a tiny bit cloudy. Had like a wave through it. I figured it was not heated long enough so i reheated at same time interval and temp. Turn out very nice looking and everything held. I did only come out with 8 and 1/4 vials instead of 10.

Powderguy might be on to the answer.

So D12 has 28g of powder in about 85ml liquid. Total is about 113 depending on what displacement factor of powder you use. I get 250mg/ml. All good.

The result is 82.5ml of gear? Pretty big error / loss somehow along the way. That makes the concentration way higher, IF the error was in the amount of liquids.



I would take a small amount, dilute to half concentration with gso. Filter, and shoot. No extra BA or BB. Small dose this time.

Yesterday i pinned .75 mg instead of the usual 1mg. Absolutely no pain with a little bit of swelling. Feels good. If it is a higher dose, can anyone give me a guestimate on the approximate mg / ml. Thank you in advance.

I dunno. You got me bro. I have never brewed Sust. Just plain old Test Cyp for me.

xandercrews said:

Powderguy might be on to the answer.

So D12 has 28g of powder in about 85ml liquid. Total is about 113 depending on what displacement factor of powder you use. I get 250mg/ml. All good.

The result is 82.5ml of gear? Pretty big error / loss somehow along the way. That makes the concentration way higher, IF the error was in the amount of liquids.



I would take a small amount, dilute to half concentration with gso. Filter, and shoot. No extra BA or BB. Small dose this time.

Click to expand...

I have no idea what any of that meant, but it sounded scientific enough to me lol

Presser said:

I have no idea what any of that meant, but it sounded scientific enough to me lol

Click to expand...

simplified version:

you fucked up measuring your oil. add some more and try it.

lol

Lol that about sums it up. So let us know how it turns out with the proper volume