PDA

View Full Version : What do you think of my first homebrew?



TestIsBest
05-13-2015, 11:39 AM
This is my test prop dosed at 150mg per ml. What do you guys think good or bad?

Presser
05-13-2015, 11:56 AM
I guess it looks ok lol

TestIsBest
05-13-2015, 12:02 PM
Was nervous as hell doing it, the filters are a pain in the a** lol

d12hazz
05-13-2015, 01:15 PM
Looks good to me..... how did you like the smell of the raws cooking? I love the smell for some reason. Maybe cause i know some good gear is on the way!

TestIsBest
05-13-2015, 02:44 PM
Thanks buddy, yeah the smell reminds me of a hospital, and when you get the oil on your hands they feel so greasy :/ but yeah I can't wait to try it out. Hopefully not too much pip

Powderguy
05-13-2015, 05:23 PM
What recipe did you use? did you use mine with no more than 1.9mls of BA? If so your PIP will be minimal

d12hazz
05-13-2015, 10:13 PM
What recipe did you use? did you use mine with no more than 1.9mls of BA? If so your PIP will be minimal

I used PG recipe about a month ago and came out real nice. No complaints at all........ Thanks PG........ now I have to get this whinny shit down and I'll be happy.

TestIsBest
05-14-2015, 02:15 AM
I don't think I've came across your recipe yet, I will check it out though. The one I used had 2ml of BA in.

Powderguy
05-20-2015, 08:11 AM
2mls of BA in a winnie recipe? ouch

Presser
05-20-2015, 08:15 AM
2mls of BA in a winnie recipe? ouch

i think he did that with propionate though

Powderguy
05-21-2015, 09:13 AM
Oh..well ouch still..lol
I don't use a lot of BA with Prop.

Presser
05-21-2015, 09:18 AM
Oh..well ouch still..lol
I don't use a lot of BA with Prop.

I've used 2ml BA, and 7ml BB in a 10 grams propionate batch before, and it was painless, but then again nothing hurts my old leather ass anymore lol,

TestIsBest
05-24-2015, 04:40 AM
Yeah it's test prop. Not too sure if it will hurt or not, I just won't use it on Virgin muscles. But shooting 1ml eod isn't that much so it it does hurt I'll have to man up :)

Presser
05-25-2015, 12:08 PM
I wish i had some Virgin muscles left lmao

TestIsBest
05-26-2015, 01:48 AM
I bet you feel absolutely no pain at all when pinning then, that pretty lucky, doing my delt feels like stabbing it with a rusty knife and twisting it inside

TestIsBest
06-04-2015, 04:00 PM
Hey everyone quick update, just pinned 1ml (150mg) of the test prop in my right delt and it went through a 23g needle just fine and pip isn't too bad. Once I pulled out my shoulder went a bit numb, gave it a little rub and it feels ok now. Also this is my first time doing prop. I'm running a cruise dose of 250mg test e ATM but wanted to test the test ;)

Stickler*
06-04-2015, 07:39 PM
I wish i had some Virgin muscles left lmao

Dude... you don't have a virgin ANYTHING left! ... lol ...

Presser
06-05-2015, 07:20 AM
I have 3 Virgin kids!

Stickler*
06-05-2015, 03:01 PM
I have 3 Virgin kids!

holy shit! ... where have I been?! ... woW ! ... congrats! (even though they are probably old by now!) ...

BEASTZ6
06-12-2015, 01:36 AM
Nobody doesn't love prop....lol

Powderguy
06-12-2015, 05:28 PM
My animals don't like it..so I stopped sharing lol

dorian123
06-12-2015, 06:06 PM
Nobody doesn't love prop....lol

I'm a bitch when it comes to prop-too much pain and swelling

TestIsBest
06-15-2015, 08:08 AM
Yea I had lots pain the next day could barley move my leg or my shoulder. There was lots of weird stuff in the filters which looked like crystals. Do you think it's possible it could have crashed whilst filtering so I was only injecting gso, Ba, and bb? Really confused. Any suggestions on why and maybe a recipe with 1% Ba 20%bb for 100mg per ml

Powderguy
06-15-2015, 11:26 AM
Yea I had lots pain the next day could barley move my leg or my shoulder. There was lots of weird stuff in the filters which looked like crystals. Do you think it's possible it could have crashed whilst filtering so I was only injecting gso, Ba, and bb? Really confused. Any suggestions on why and maybe a recipe with 1% Ba 20%bb for 100mg per ml

That's prop for ya, however I believe its the BA content ad the high BB. I posted under this forum section about BA and BB and their uses.
Do you know why your using BB? Most have no clue and honestly I rarely do.

The crystals you see are super saturated solution crystals. Heat your solution and I bet you they go away. You may have done your gram measurements incorrect or added less oil.

per your 100ml do 2ml BA and 9ml BB and make sure you heat the solvents in your powder while adding heated oil and keep swirling. You will bind them together and cease the titration that its causing at room temp. Do this until all oil is added and the solution looks clear then allow to cool some to room temp then filter.
Try this.

TestIsBest
06-15-2015, 03:12 PM
That's prop for ya, however I believe its the BA content ad the high BB. I posted under this forum section about BA and BB and their uses.
Do you know why your using BB? Most have no clue and honestly I rarely do.

The crystals you see are super saturated solution crystals. Heat your solution and I bet you they go away. You may have done your gram measurements incorrect or added less oil.

per your 100ml do 2ml BA and 9ml BB and make sure you heat the solvents in your powder while adding heated oil and keep swirling. You will bind them together and cease the titration that its causing at room temp. Do this until all oil is added and the solution looks clear then allow to cool some to room temp then filter.
Try this.
Thanks for the reply mate, yeah I have absolutely no clue what bb does, maybe it keeps it suspended? Will defo have a read. And thanks for the great advice I will try that recipe tomorrow. How much ml of gso do I use? Was thinking 89 but the powder itself fills some of the beaker. I heat the solution lots in a pan and it all dissolves and stays dissolved even when it's cooler but as soon as I filter it the filters get clogged with crystal like things. It even clogs up with sticky looking stuff which becomes almost a solid and kinda feels like a hair. Looking forward to your next reply. Hopefully I can crack this and get a nice working batch without all the crap in the filter.

Powderguy
06-15-2015, 03:22 PM
What kind of filters are you using?

You deduct the mg and ml from your volume and the remainder will be your oil for example
1 gram test p= displacement approx. 1 ml
2ml ba+=displacement 1 ml
9ml bb =displacement 9mls
for a 50ml solution equals 38 mls of oil left to add..(JUST AN EXAMPLE DONT USE THIS RECIPE ITS JUST AN EXAMPLE)

Some heavier raws will take more room like EQ for instance so decrease your total volume of oil by 1ml for every 5 grams of EQ used.

Are you over heating your solution above 125 degrees?
You should heat in a water bath of boiling water, this will allow no direct contact with the heat source or your magnet stirrer will work just adjust the heat.

TestIsBest
06-15-2015, 04:47 PM
What kind of filters are you using?

You deduct the mg and ml from your volume and the remainder will be your oil for example
1 gram test p= displacement approx. 1 ml
2ml ba+=displacement 1 ml
9ml bb =displacement 9mls
for a 50ml solution equals 38 mls of oil left to add..(JUST AN EXAMPLE DONT USE THIS RECIPE ITS JUST AN EXAMPLE)

Some heavier raws will take more room like EQ for instance so decrease your total volume of oil by 1ml for every 5 grams of EQ used.

Are you over heating your solution above 125 degrees?
You should heat in a water bath of boiling water, this will allow no direct contact with the heat source or your magnet stirrer will work just adjust the heat.
I am using 0.22um whatman filters. I never got the temperature of the water but I turned the dial to the las number (6) and the water was boiling hot. Thanks for the conversions, on another site I saw that 10g of test prop was 7.5ml but I use very accurate scales to measure it out and accurate syringes to measure out the bb and Ba and a huge veterinary horse syringe for the gso

Powderguy
06-16-2015, 08:47 AM
Filters come in PTFE or PTVD and other types of membranes. What type is yours it should say on the filter paper or the syringe filter.

You don't need the water boiling hot if its that hot its over 136 degrees. Warm to where is letting of steam is sufficient.

BB is a thinner and will help thin the solution as well as act as a solvent (dissolving agent) for some raws.

TestIsBest
06-16-2015, 05:12 PM
Filters come in PTFE or PTVD and other types of membranes. What type is yours it should say on the filter paper or the syringe filter.

You don't need the water boiling hot if its that hot its over 136 degrees. Warm to where is letting of steam is sufficient.

BB is a thinner and will help thin the solution as well as act as a solvent (dissolving agent) for some raws.
Mine are PVDF ones. Ok will take note on the water heat levels. Ok so for my next try I will use 2ml of BA 9ml of BB and 80.5 ml of grape seed oil. Do you think it will pass through the filter ok now? Or could it crash again? Thanks

Giru
06-18-2015, 10:05 AM
i am just waiting for my raws to arrive. i can't help you bro, but your experience will help me a lot, i am just following your post! Thanks for that info!

Here i give the the main differences between the filters:

The big difference between PTFE and PVDF is that the PTFE membrane can be used for the filtration of strong acid and aggressive solutions, but the PVDF membrane is suited for filtration of non-aggressive aqueous and mild organic solutions.

Powderguy
06-18-2015, 10:24 AM
What is it that you are making? It is all dependent on the type of ester (raw hormone) that determines what should be used. For example Deca does not require BB and I have never used it in deca and have painless strong concentrations all the time with no crashing.
Test prop requires less BA but more BB than usual because of the ester and breaking it down to hold in solution, I have TP at 200mg/ml..has some PIP but not more than 100mg/ml stuff.