Thanks Thanks:  0
Recommend Recommend:  0
Likes Likes:  0
  1. #1
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,686
    Rep Power
    2147525355

    Default IGF-1 lr3 Diluent suspension Guide

    Can I Use bacteriostatic water or sterile water for my Long R3 Insulin-Like Growth Factor-1 or Will It Degrade Peptide.

    Can you use Bacteriostatic or Sterile Water as a Diluent for your insuline-like growth factor-1 longR3 (IGF-1 Lr3)? Everything is relative when it comes to the answer or Yes and No!

    I had honestly thought the verdict was in and everyone had figured out how best to reconstitute their igf-1 lr3 and maybe that is because i had not visited too many other forums outside the 3 or 4 that I now frequent, of which the majority of their members there, at least the ones active in their respective peptide or research chemical forums. However, and likely due to the fact that the older the IGF-1 Lr3 article of information is, the higher up the search engine rankings it will be found by those new to IGF-1 and seeking answers on how to use IGF, or how to dilute IGF-1, and all the main questions on insulin-like growth factor-1 that someone knew to it would be searching for. The older the IGF-1 lr3 information is, the further we get from really understanding how todays bodybuilder is using it or what todays best practices are regarding its use, and reconstitution. Fifteen years ago the ""proper"" IGF-1 lr3 protocol was that you could not take it for more than 4 weeks and you had to take a break after those 4 weeks otherwise your receptors would become super / over saturated and the Growth Factor would be useless. Who were we to argue when we were paying $300 per 1mg!

    However over time and as the IGF-1 was becoming cheaper by way of the process becoming easier and faster and of course being made by various pseudo pharmaceutical companies prices dropped as did the quality of this particular growth factor-1 as many companies were making chemically synthesized igf-1 lr3 which led to a whole new generation of bodybuilders growing up in an age of the internet I like to call the "hit or miss era".

    This new generation of bodybuilder was exposed to a lot of Garbage, not just IGF-1, but steroids, peptides, hgh, you name it. So from 2002 until 2012 IGF-1 lr3 had really built up a reputation for being an amazing product when used in conjunction with other hormones, or used alone, it just is that great a product, and when we delve deeper into insulin-like growth factor-1 we find that the possibilities of its use are endless in what it can do from build muscle, to repair tendons by way of cartilidge synthesis, creating new receptors for better uptake of our exogenous hormones like testosterone.

    By 2012 most meatheads even understood that insulin-like growth factor-1 was the end result of HGH, after its pass through the liver, and that the true benefits of HGH injections were most all due to its converting into IGF-1. (note: hgh, Human Growth Hormone converts to many different growth factors, although Insulin-like growth factor-1 is what benefits bodybuilders, and fitness athletes by far the most)

    With this same understanding, companies started to produce more and more chemically synthesized IGF-1 lr3 , along with many vendors selling HCG, as IGF-1 lr3 and in the course of maybe 2 years (2012-2014) IGF-1 lr3 and its popularity had plummeted, and in my opinion only holding on now due to the few place left where you can find real IGF-1 lr3. Actually there are still quite a few companies selling real igf-1 lr3, you just need to read real customer testimony / reviews, and make sure the company has been around for a while, as it is very hard to obtain real igf-1 lr3 unless you had a foothold with a real manufacturers of IGF-1 lr3 many years ago.


    IGF-1 lr3 lyophilization and reconstitution confusion is greater than any other substance I have come across, and the confusion is always the same as is the answer which is usually YES and NO to the same questions. huh you ask?

    Lets go over some well knows do's and donts when it comes to Buying and Reconstituting Insulin-like Growth Factor-1 Longr3

    1) Never Buy IGF-1 lr3 already reconstituted, as it ONLY comes in Lyophilized form! This statement is true, and false at the same time. Let me explain
    Yes IGF-1 lr3 comes lyophilized when purchased directly from real Bio/cell culture companies like Cell Sciences and the like, or the Original IGF-1 Lr3 Patent Owner "Gropep" it comes in 20mg increments all in one big vial. Other real companies will sometimes package in increments of 50mg lyophilized IGF-1 lr3. Point is when you purchase direct from the Manufacturer (if your fortunate enough) then you will be buying one big vial with either 20mg or 50mg of lyophilized IGF-1 lr3. So yes when you buy direct from the Manufacturer this is the Only way it comes!

    Yes IGF-1 Lr3 Comes Reconstituted as well, but never from manufacturer, and only from once again those fortunate enough to be able to purchase from manufacturer still. These vendors who purchase the 20mg or 50mg increments of Lyophilized IGF-1 lr3 add either 20ml or 50ml of acetic acid solution or Benzyl Alcohol to the vial of Lyophilized IGF-1 lr3, which is then broken down into smaller vials filled with 1mg/ml (1,000micrograms). The acetic acid solution is a very specific PH optimum for this particular Growth Factor making it viable for very long periods of time.

    So again, Does IGF-1 lr3 ONLY Come In Lyophilized form? YES & NO!

    Never Buy Already Reconstituted IGF-1 Lr3? YES & NO

    NOTE: (Most 1mg vials of lyophilized IGF-1 lr3 is Fake! Its usually H.C.G.)

    Remember: Real Manufacturers of Insulin-Like Growth Factor-1 Long R3 Only Sell It In < 20mg lyophilized form and it comes in one big vial.


    2) Never Reconstitute Your IGF-1 Lr3 With Bacteriostatic water or Sterile Water as It will Quickly Degrade the Insulin-like Growth Factor-1 lr3


    Once again the answer is: YES & NO

    For the record, the answer more often than not is that you can NOT and should NOT use Bact or sterile water to reconstitute your igf-1 lr3, as both types of water will begin degrading your igf-1 lr3 very fast from the onset.

    The ONLY time you can use waters to reconstitute your IGF-1 lr3 is if you are going to use the entire amount you just reconstituted within 24-48 hours.

    Now the confusion comes from the fact that some vendors of IGF-1 lr3 sell it in IGF Kits that come with 10 vials , each vial only 100mcg of Lyophilized powder, and the entire total of all 10 vials is 1mg. So if one were to obtain real IGF-1 lr3 that came this way, then using water to reconstitute their 1 or 2 day supply would be fine as again its only 100mcgs per vial. Now if you were to try using water as a diluent for even 1mg in one vial, you would need to use that up within a couple of days , now thats 1mg (1,000mcgs) so unless your going to be using 500mcgs daily and go through an entire 1mg in 2 days then you do NOT want to be using Water of any kind as a diluent.

    Even the original patent Owner and Creator of IGF-1 Long R3 lists how to reconstitute with acid solution, more specifically Glacial Acid, and the reason being is that Glacial Acid Doesnt have the water molecule and we all know water degrades IGF-1 lr3. The difference between Acetic Acid and Glacial is 1 water molecule, and for the purposes of most end users , acetic acid is more than sufficient for holding this growth factor for long periods of time without degradation.

    Also, due to the small volume (mcgs) were dealing with, a lot of guys will back load their syringe with bact or sterile water to push that last little bit of igf out of the pin! So this too I believe contributes to the MYTH that it is ok to use water to reconstitute or dilute your igf-1 lr3 with.


    So again a YES & NO answer as everything is relative to the answer. Though its best to just stay away from the waters as a diluent all the time, even in the case where you might have real lyophilized igf in 10 vial kits at 100mcg per vial, as they are counterfeited frequently.


    I will edit and add more to this when time permits!

    Thank you!
    IGF-1 lr3 Diluent suspension Guide

  2. #2
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,686
    Rep Power
    2147525355

    Default

    BUMPING SOLID READ
    IGF-1 lr3 Diluent suspension Guide

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in