1. #1
    MuscleChemistry Newbie Residency Training
    jstarks11's Avatar
    Join Date
    Feb 2011
    Posts
    19
    Rep Power
    0

    Default Powder Conversion Recipies

    Here are some recipes I found that I think need to be looked at. These are very good recipes and should help out many. Remember, unless you're putting a very small mg/ml in your brew then you should be better off to use 18 to 20 % BB. These recipes are set up for a 50% Ethyl Oleate (co solvent and sort of an oil) and 50% Grape Seed Oil as this oil is thinner than Sesame and makes for smoother injections not to mention that it is healthier (has vitamins and stuff sesame doesn't Yippppeeeee!) You can use pure EO if you want it will hold stuff in suspension better (wont crash as easy). It's expensive but worth it if you have the money. There is no steps to conversion here because all of them are the same! The way you cook your brew now (unless you're doing it wrong) is the way you brew this.
    Have fun!!!!!


    Test E/C/D, Deca, Eq, Tren E, Primo E 50mls @ 200mgs/ml

    10g powder
    17.5ml Ethyl Oleate (EO)
    16ml Grapeseed Oil (GSO)
    1.5ml BA (3%)
    7.5ml BB (15%)

    Test E/C/D, Deca, Eq, Tren E, Primo E 40mls @ 250mgs/ml
    10g powder
    13.3ml EO
    12 ml GSO
    1.2ml BA (3%)
    6ml BB (15%)

    Test E/C/D, Deca, Eq 40mls @ 300mgs/ml
    12g powder
    11.8ml EO
    10ml GSO
    1.2ml BA (3%)
    8ml BB (20%)

    Test E/D, Deca, Eq 30mls @ 333mgs/ml
    10g powder
    10ml EO
    5.6ml GSO
    .9ml BA (3%)
    6ml BB (20%)

    Test Prop (TP)/PhenylProp (TPP), Tren A, Masteron, Npp 100mls @ 100mg/ml
    10g powder
    37.5ml EO
    37ml GSO
    3ml BA (3%)
    15ml BB (15%)

    Test Phenylprop, Masteron, Npp 60mls @ 150mg/ml
    9g powder
    25ml EO
    14.5ml GSO
    1.8ml BA (3%)
    12ml BB (20%)

    Test PP, Masteron, NPP 60mls @ 166mg/ml
    10g powder
    25ml EO
    13.7 GSO
    1.8ml BA (3%)
    12 ml BB (20%)

    Cut Stack (test p 75mg/ml, tren a 50mg/ml, masteron 50mg/ml) 40mls @ 175mg/ml
    3g test prop powder
    2g tren a powder
    2g masteron powder
    15ml EO
    10.6ml GSO
    1.2ml BA (3%)
    8ml BB (20%)

    Mass Stack (Test E 150mg/ml, Deca 100mg/ml) 40mls @ 250mg/ml
    6g test E powder
    4g deca powder
    13ml EO
    12.3ml GSO
    1.2ml BA (3%)
    6ml BB (15%)

    Sustanon 100mls @ 250mgs/ml
    10g test dec
    6g test iso
    6g test phenyl
    3g test p
    32ml EO
    31.25ml oil
    3ml BA (3%)
    15ml BB (15%)

    Sustanon 100mls @ 350mgs/ml
    13g test dec
    8g test iso
    8g test phenyl
    6g test p
    30.75mls EO
    20mls GSO
    3ml BA (3%)
    20ml BB (20%)

    TP(PP)/NPP stack (test p/pp 75mg/ml, npp 50mg/ml) 40mls @ 125mg/ml
    3g test p/pp powder
    2g npp powder
    15.1ml EO
    12ml GSO
    1.2ml BA (3%)
    8ml BB (20%)

    Test Acetate (A), P, or PP/Tren A stack (test A/P/or PP 75mg/ml, tren a 50mg/ml) 40mls @ 125mg/ml
    3g test a/p/pp powder
    2g tren a powder
    15.1ml EO
    12ml GSO
    1.2ml BA (3%)
    8ml BB (20%)

    Winstrol Recipe#1
    50ml @ 50mg/ml
    2.5g powder
    8ml BB
    2.5ml BA
    1ml peg 300
    .5ml poly
    mix powder, bb, ba, and poly and heat at 325 degrees until dissolved, filter, and add 39ml distilled water and re-filter.

    Winstrol recipe #2
    20mls @ 50mg/ml
    1g powder
    4.8ml BB
    0.6ml BA
    0.6ml polysorbate 80
    12.5ml distilled water
    mix powder, BB, BA, and poly and heat until dissolved. filter, add water and re-filter


    Winstrol recipe #3 Oil based (never done this but i trust the recipe)
    20ml @ 50mg/ml
    1g winstrol powder
    17ml oil
    .2ml BA
    2 ml guaiacol ("super solvent")
    mix powder and guaiacol first then add oil and BA. __________________
    thats just like....your opinion, man.


    Last edited by Presser; 01-14-2024 at 11:48 AM.
    Thanks goodness, nbhuge, H8terproof, big_iron_up, pgb thanked for this post
    Likes nbhuge, H8terproof, big_iron_up, BEASTZ6, pgb liked this post
     

  2. #2
    MuscleChemistry Newbie Residency Training
    muscle_4you's Avatar
    Join Date
    Jan 2007
    Posts
    9
    Rep Power
    0

    Default

    Great info bro!! Thanks!!

    Ntr
    muscle_4you
     

  3. #3

    Join Date
    Mar 2011
    Posts
    0
    Rep Power
    0

    Default

    ive tried the last formula listed here. I had some problems with it. Making that small of amount is hard to get it to dissolve without burning it. It turns to jelly. Thick. I've ruined 15 gms now f-ing with this. Has anyone tried the win recipe 1 or 2 yet?
    Likes richl711 liked this post
     

  4. #4
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,682
    Rep Power
    2147525351

    Default

    bump
    Powder Conversion Recipies

  5. #5

    Join Date
    Nov 2013
    Posts
    0
    Rep Power
    0

    Default

    Bro
    A lot of these guys have never tried these recipes and just repost them from other sites. Winny is super tough to work with unless you do it right and include every lil step just right. The real key to winny is you gott cook the heck out of it! I have a full proof recipe I can share if you want but this takes an hour to make and you do not cut any corners. I have made over 1000 mls successfuly after trial and error for two months. I am also working on my college degree in organic chemistry. Before I send you the recipe make sure you have Guical, BB, EO, Powder and BA you will also need real PVDF filters prefferably used with a vacuum compressor. I have a link to order them from a company right by my house where a case of the whatman/Klari style top and bottom full unit filters are less then $100( thats like $8 each and well worth it! I dont know if we can send private emails or not because I dont use these sights very often but I'd like to help you get it right. You wont waist another gram of powder i assure you.


    Thanks THE 67 thanked for this post
    Likes Unforgiven21 liked this post
     

  6. #6
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,682
    Rep Power
    2147525351

    Default

    just post the fucking recipe already! this thread is old, and your talking to yourself, enough already!
    LMAO mikey8332000 Laughed Ass Off
    Likes beeflover, Userat204, BEASTZ6 liked this post
     
    Powder Conversion Recipies

  7. #7

    Join Date
    Nov 2013
    Posts
    0
    Rep Power
    0

    Default

    If I'm talking to myself then please stay out of my conversation brainiak!. Its a very intelligent and tough guy that can sit behind a computer barking like a dog.. I'm just say-in...........oh and I dont have time to spend all day on the forums jumping into to every little topic possible and being negative towards people offering there help so I wasnt aware that it was dead. Ive been at the gym all week.......lol....My experience is made from studying hard, life experience and consistency....Oh did I mention that we have submitted our official recipe to Eyli-Lili and the US patten office? Ya so when they start having the shit at your local pharmacy it will be the exact recipe that I post..........in an email to the guy that asked for it. That way undeserving people wont have the chance to mess it up. Thanks
    Likes THE 67, pgb liked this post
     

  8. #8
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,682
    Rep Power
    2147525351

    Default

    lol, yes you submitted your recipe to the Pharma companies, and your Oh so close to getting a Patten on it, lol, get the fuck out of here with your useless dribble!
     
    Powder Conversion Recipies

  9. #9
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,682
    Rep Power
    2147525351

    Default

    making sticky thread
    Powder Conversion Recipies

  10. #10
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    Here is something I wanted to add to this thread. This will help when making your conversions and you can adjust the quantity of solvent and carriers as necessary.

    *Testosterone Base - 1g Displaces 0.893mL
    TestosteronePropionate - 1g Displaces 0.909mL
    Testosterone enanthate - 1g Displaces 0.943mL
    Testosterone cypionate - 1g Displaces 0.909mL
    Testosterone decanoate - 1g Displaces 0.962mL
    Testosterone Isocaproate - 1g Displaces 0.935mL
    Testosterone Phenylpropionate - 1g Displaces 0.885mL
    Trenbolone Acetate - 1g Displaces 0.848mL
    Trenbolone enanthate- 1g Displaces 0.909mL
    Nandrolone deconate- 1g Displaces 0.962mL
    Masterone propionate - 1g Displaces 0.935mL




    Something to remember is that some powders are not water or organic material soluble and therefore require a solvent heat mixture to dissolve them, once placed in a carrier they can become separated (like water does in oil) and will not hold saturated in organic substances. Example of these are *test base, methandrostenolone, stanozolol , oxymetholone and oxandrolone. These substances are solvent soluble and not organic material soluble. They must be heated and dissolved in a solvent before mixed with a heated carrier, or heated and pressed into tabs with a filler(binder).

    Hope this helps some

    January 14th, 2024



    This table lists various anabolic steroid compounds along with their displacement values, indicating the volume displaced by 1 gram of the compound. Remember, this information is for informational purposes and should be used responsibly and legally by qualified individuals.
    Last edited by Presser; 01-14-2024 at 11:55 AM.
    Likes Billy69 liked this post
     

  11. #11
    MuscleChemistry Newbie Residency Training
    THE 67's Avatar
    Join Date
    Nov 2014
    Location
    planet earth
    Posts
    10
    Rep Power
    0

    Default

    hey rich.. i wouldnt mind looking at ur recipe on the winny and others tht u might want to share.. i have a full lab setup as well... how do i pm you to look at this recipe.. thanks for all your help if u choose to respond ..
    Likes Unforgiven21 liked this post
     
    KNOWLEDGE IS POWER !!! ... THE 67 ...

  12. #12
    MuscleChemistry Newbie Residency Training
    THE 67's Avatar
    Join Date
    Nov 2014
    Location
    planet earth
    Posts
    10
    Rep Power
    0

    Default

    hey powder guy !!! .. awesome read was trying to find the displacements everywhere... thanks so much.. would u have the displacments for all of the raw hormone compounds lik npp,d-bol etc ???? or where i could find them at if u dont have them on hand.. thanks..
    KNOWLEDGE IS POWER !!! ... THE 67 ...

  13. #13
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    You can take molecular weight and do the math for displacement. Its pretty simple really, but I can do it and post the rest of them here if that helps.
    Thanks beeflover thanked for this post
    Likes beeflover liked this post
     

  14. #14
    MuscleChemistry Newbie Residency Training
    THE 67's Avatar
    Join Date
    Nov 2014
    Location
    planet earth
    Posts
    10
    Rep Power
    0

    Default

    powderguy ,,, thanks bro tht would really help if u could post the rest of the compounds .. YOU ROCK ! and if possible could u show me the equation in order to get these displacements ??? i want to be able to do this if i ever need to and i dont have my ratios near me.. if this is to mucgh then thts cool.. all the help you post would be much appreciated sir. hope tht all is well with you and family
    KNOWLEDGE IS POWER !!! ... THE 67 ...

  15. #15
    MuscleChemistry Newbie Residency Training

    Join Date
    Sep 2014
    Posts
    6
    Rep Power
    0

    Default

    looks like suckin the ... didnt get you much of anything huh... hahaha
     

  16. #16
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    Quote Originally Posted by BuryMeBig View Post
    looks like suckin the ... didnt get you much of anything huh... hahaha
    all its going to get you is banned..how do you like that?
    Likes Presser liked this post
     

  17. #17
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,682
    Rep Power
    2147525351

    Default

    lol, howd i miss this gem lol
    Likes charliebigspuds, Powderguy liked this post
     
    Powder Conversion Recipies

  18. #18
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    LOL I know right.
    Likes Presser liked this post
     

  19. #19
    MuscleChemistry Newbie Residency Training

    Join Date
    Dec 2013
    Posts
    3
    Rep Power
    0

    Default

    How low can you go on the BB in standard test?
    How about test P? I went 15% and a I had a bad PIP?
     

  20. #20
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    Quote Originally Posted by miggymig View Post
    How low can you go on the BB in standard test?
    How about test P? I went 15% and a I had a bad PIP?
    Standard test? I need more info. What kind of test? How much BA was added, What was the Mg/ML ration and what was the amount of BA/BB in how many ML's?

    15% is high but honestly the Bb is not what causes the PIP, it does effect the travel of the BA and the hormone in the muscle as it is a solvent and acts as a thinner.
     

  21. #21
    MuscleChemistry Newbie Residency Training

    Join Date
    Dec 2013
    Posts
    3
    Rep Power
    0

    Default

    [QUOTE=Powderguy;704808]Standard test? I need more info. What kind of test? How much BA was added, What was the Mg/ML ration and what was the amount of BA/BB in how many ML's?

    15% is high but honestly the Bb is not what causes the PIP, it does effect the travel of the BA and the hormone in the muscle as it is a solvent and acts as a thinner.[/QUOTE


    Test E 250
    200ml batch
    30ml BB
    3ml BA
    150 ml oil
    50 G of Raw

    Slow heated on a hot plate, .22 filtered. Vials and tops pressure sterilized filled using a 60ml syringe
     

  22. #22
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    Is your raw from China? What kind of Oil are you using?
     

  23. #23
    MuscleChemistry Newbie Residency Training

    Join Date
    Dec 2013
    Posts
    3
    Rep Power
    0

    Default

    Yea China it was from a source recommended by Bigz
    I use GSO
     

  24. #24
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    Ok thanks..
    So lower the Bb to 15mls per the 200mls
    the BA should be 2mls per 200mls
    you need to dissolve the raw in the solvents first-if it turns cloudy your raw has not finished the acid wash process-add 1-2 mg sodium bicarbonate (baking soda) to the solution
    Gently heat it to turn it fairly clear and heat your oil no hotter than 150 Degrees, luke warm. Add it to the mix and filter.

    The PIP could be the high BA and the Test E not completing its full process from the manufacturer-Test E that has completed the process will always run 3-5$ per gram. if the Test E price is roughly 35-40$ per 10Grams then its the Subgrade and not pure and is the type they use in chemical experiments not human Pharm grade.
     

  25. #25
    MuscleChemistry Guru Board Certified CPH
    BEASTZ6's Avatar
    Join Date
    Jan 2009
    Posts
    1,750
    Rep Power
    2147485413

    Default

    PG. You have a PM.
     

  26. #26
    t.c.jones's Avatar
    Join Date
    Feb 2015
    Posts
    0
    Rep Power
    0

    Default

    Quote Originally Posted by Powderguy View Post
    You can take molecular weight and do the math for displacement. Its pretty simple really, but I can do it and post the rest of them here if that helps.
    Hey Powderguy could you show us the equation to do for displacement?
     

  27. #27
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    I could, I will do it in another thread
     

  28. #28
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,682
    Rep Power
    2147525351

    Default

    i dont understand the purpose or meaning of displacement ??

    I mean if you know where the line is to fill large vial or beaker to for a certain amount of ML's then why do you need to know displacement?

    ANother words if your making something thats 100mls, and you know the 100ml marker on the beaker or large vial, then don't you just add the powder, then the ba and bb , let is dissolve, then fill the beaker or vial up to the marked area for 100ml with your oil? I just don't understand what the purpose of displacement math is all about

    am i missing something? if so then i would like to know, cause it doesn't make any sense to me so long as you already know where your marker is for however many MLs your making, or am i missing something here
    Powder Conversion Recipies

  29. #29
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    Your not bro..i think some are Anal about the mg/ml volume. honestly its not going to make a huge difference but its what they asked for.
    EX Test Dec displaces .962 of 1 gram added which in turn displaces 1 ml Well close to it.
    After the solution is made the .038 displacement area can be filled with additional powder for more mg/ml ratio or more fluid volume.
    its the 1cent that gets put in the change jar, after a high volume it eventually adds up.

    Honestly the only reason displacement should be an issue is if it over 1.0 displacement. Most of the common ones are already listed but apparently some are chemists and need to have it extremely accurate but it still doesn't resolve how much is in the filtration process-right?

    anyhow, I will list it and see if its that vital.
    Likes Presser, d12hazz liked this post
     

  30. #30
    MuscleChemistry Registered Member Board Certified DMD

    Join Date
    Feb 2015
    Posts
    726
    Rep Power
    0

    Default

    Quote Originally Posted by Presser View Post
    i dont understand the purpose or meaning of displacement ??

    I mean if you know where the line is to fill large vial or beaker to for a certain amount of ML's then why do you need to know displacement?

    ANother words if your making something thats 100mls, and you know the 100ml marker on the beaker or large vial, then don't you just add the powder, then the ba and bb , let is dissolve, then fill the beaker or vial up to the marked area for 100ml with your oil? I just don't understand what the purpose of displacement math is all about

    am i missing something? if so then i would like to know, cause it doesn't make any sense to me so long as you already know where your marker is for however many MLs your making, or am i missing something here
    Thanks for asking this question because i was in the same boat as you. In a thermo dynamics class in i recently took, we were taught that after the one hundredth decimal place there really is no need for any value. It will not necessarily give you a more precise answer. In fact, it may cause you more problems down the line in the equation. I imagine this could be the same, to a certain extent in chemistry. It's been a while, but in engineering chem 2 we were taught to carry out the decimal points until the final answer, and depending on the value and number of significant numbers is how many decimal places should be used. I maybe going way to in depth but i agree with you, don't think it matters much.

    - - - Updated - - -

    Quote Originally Posted by Powderguy View Post
    Your not bro..i think some are Anal about the mg/ml volume. honestly its not going to make a huge difference but its what they asked for.
    EX Test Dec displaces .962 of 1 gram added which in turn displaces 1 ml Well close to it.
    After the solution is made the .038 displacement area can be filled with additional powder for more mg/ml ratio or more fluid volume.
    its the 1cent that gets put in the change jar, after a high volume it eventually adds up.

    Honestly the only reason displacement should be an issue is if it over 1.0 displacement. Most of the common ones are already listed but apparently some are chemists and need to have it extremely accurate but it still doesn't resolve how much is in the filtration process-right?

    anyhow, I will list it and see if its that vital.
    Thanks for the explanation. I was under the same assumption as presser. I didn't think it mattered much.
    Thanks Presser thanked for this post
    Likes Presser liked this post
     

  31. #31
    t.c.jones's Avatar
    Join Date
    Feb 2015
    Posts
    0
    Rep Power
    0

    Default

    You make a good point Presser. I thought it mattered that's why I asked for it. But the way you said it makes it easier.
    Thanks Presser thanked for this post
    Likes Presser liked this post
     

  32. #32
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,682
    Rep Power
    2147525351

    Default

    Quote Originally Posted by t.c.jones View Post
    You make a good point Presser. I thought it mattered that's why I asked for it. But the way you said it makes it easier.
    im glad you asked cause its ben bothering me every time i read about displacement, and have been wanting to ask this question for years now actually lol
    Powder Conversion Recipies

  33. #33
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,682
    Rep Power
    2147525351

    Default

    Quote Originally Posted by d12hazz View Post
    Thanks for asking this question because i was in the same boat as you. In a thermo dynamics class in i recently took, we were taught that after the one hundredth decimal place there really is no need for any value. It will not necessarily give you a more precise answer. In fact, it may cause you more problems down the line in the equation. I imagine this could be the same, to a certain extent in chemistry. It's been a while, but in engineering chem 2 we were taught to carry out the decimal points until the final answer, and depending on the value and number of significant numbers is how many decimal places should be used. I maybe going way to in depth but i agree with you, don't think it matters much.

    - - - Updated - - -



    Thanks for the explanation. I was under the same assumption as presser. I didn't think it mattered much.

    Ummm yeah you think , lmao!!! I haven't a clue what the fuck any of that meant lol
    Powder Conversion Recipies

  34. #34
    MuscleChemistry Newbie Residency Training

    Join Date
    Apr 2015
    Posts
    2
    Rep Power
    0

    Default

    Dbol oil recipe needed,
    Looking for a stable recipe @50mg/ml(if pos)in gso,bb,ba(wats highest concentration u guys made?

    Trying to stay away from guaiacol and eo,if I can.

    If not please point me to a recipe with guaiacol and eo,
    There's too many conflicting recipes,
    If any of the good guys can help with a tried and tested recipe please.
     

  35. #35
    MuscleChemistry Newbie Board Certified D.V.M.

    Join Date
    Jun 2015
    Posts
    36
    Rep Power
    0

    Default

    Ok maybe a stupid question but if these recipes are for 50/50 GSP and EO then why are the ml different? Shouldn't the EO and GSO be exactly the same?
     

  36. #36
    MuscleChemistry Newbie Residency Training

    Join Date
    Sep 2016
    Posts
    2
    Rep Power
    0

    Default

    Thanks for the info
     

  37. #37
    MuscleChemistry Newbie Residency Training

    Join Date
    Mar 2013
    Posts
    6
    Rep Power
    0

    Default

    Hi guys! Been offline almost 18 months but back now dont think someone noticed, haha but anyway, I used to brew alot of gear, but feeling little rusty after one and a half years of no practice. I used to do 2%BA 20%BB to almost everything except deca, test e and eq. For those I usually did 15% bb.
    So anyway, now Im starting brewing again and Im thinking about lower ba to 1-1,5% and lowering bb to 10-15%... What do you guys think? Ive made alot before with mostly very nice oils with very little if any pip. Will tren e/a and test/mast prop hold in 10%bb? I make 1000ml batches, if that matters... Thankful for advices and thoughts good to be back!
    Likes Presser liked this post
     

  38. #38
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,682
    Rep Power
    2147525351

    Default

    Quote Originally Posted by Asphyx View Post
    Hi guys! Been offline almost 18 months but back now dont think someone noticed, haha but anyway, I used to brew alot of gear, but feeling little rusty after one and a half years of no practice. I used to do 2%BA 20%BB to almost everything except deca, test e and eq. For those I usually did 15% bb.
    So anyway, now Im starting brewing again and Im thinking about lower ba to 1-1,5% and lowering bb to 10-15%... What do you guys think? Ive made alot before with mostly very nice oils with very little if any pip. Will tren e/a and test/mast prop hold in 10%bb? I make 1000ml batches, if that matters... Thankful for advices and thoughts good to be back!
    Welcome back and where have ya been? Most people say "I been gone about a year and half", the only kind of people I know who say " I was gone for 18 months" are those who just got out of jail!
    Powder Conversion Recipies

  39. #39
    MuscleChemistry Newbie Residency Training

    Join Date
    Mar 2013
    Posts
    6
    Rep Power
    0

    Default

    Quote Originally Posted by Presser View Post
    Welcome back and where have ya been? Most people say "I been gone about a year and half", the only kind of people I know who say " I was gone for 18 months" are those who just got out of jail!
    Haha Presser, nice to talk to you again bro, and your absolutely right I am afraid. Its a fucked up world we live in when a man can not train and develop his body as he wishes, with the methods of his choice, even though nobody gets hurt or even really care. In another Scandi nation steroids got prohibited just a few years ago. Fells like they make laws in the wrong direction. They advert alcohol like its fine with no side-effects and doctors are feeding people with different drugs everyday, pills for sleeping, for pain, for this and for that.. But a few extra shots of testo, no sir. That is stepping over the line. Sick. Alot of OT, sorry for that. Nice to be back anyway.
    Likes Presser liked this post
     

  40. #40
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,682
    Rep Power
    2147525351

    Default

    Quote Originally Posted by Asphyx View Post
    Haha Presser, nice to talk to you again bro, and your absolutely right I am afraid. Its a fucked up world we live in when a man can not train and develop his body as he wishes, with the methods of his choice, even though nobody gets hurt or even really care. In another Scandi nation steroids got prohibited just a few years ago. Fells like they make laws in the wrong direction. They advert alcohol like its fine with no side-effects and doctors are feeding people with different drugs everyday, pills for sleeping, for pain, for this and for that.. But a few extra shots of testo, no sir. That is stepping over the line. Sick. Alot of OT, sorry for that. Nice to be back anyway.
    Well welcome back and not sure exactly how or why you got 18 months but if i were you i would certainly go get a legit Hormone Replacement Therapy Script if at all possible, last thing ya need is to get into trouble again my man!

    How did ya get in trouble anyhow, or for what exactly? I know its none of my business, but if your story can help someone else stay out of trouble then why not share it ya know, and i hope you were selling gear brutha, as theyll crucify ya for that shit , especially in the U.S.

    We have too many young knuckle heads who dont think its a big deal to deal steroids, and dont understand the consequences, not saying thats the case with you, maybe it was or not, i know i was young and dumb , and did stupid shit , so im certainly not throwing any stones my man!

    And if you went to jail for for personal use, i think thats absolute bullshit!
    Likes H8terproof liked this post
     
    Powder Conversion Recipies

  41. #41
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,682
    Rep Power
    2147525351

    Default

    And yes i know this conversation between myself and Asphyx is OFF topic, but their is no better thread to have it then a powder conversion recipe thread! Cause if your in this thread for anything other then personal shit, then think again!
    Powder Conversion Recipies

  42. #42

    Join Date
    Oct 2016
    Posts
    0
    Rep Power
    0

    Default

    recipe for premix sustanon?
    300mg/m for 50Ml and 250mg/ml

    And for dbol at 50mg/ml for 50ml

    And Decca at 300mg/ml for 50ml

    And anadrol 100mg/ml for 50ml
    Thx


    Sent from my iPhone using Tapatalk
     

  43. #43
    MuscleChemistry Newbie Residency Training

    Join Date
    Oct 2016
    Location
    Hong Kong
    Posts
    8
    Rep Power
    0

    Default

    Thanks for sharing those recipes. Any contribution to MC is highly appreciated.
     

  44. #44

    Join Date
    Oct 2016
    Posts
    0
    Rep Power
    0

    Default

    probably a stupid ass question but are those single serving recipes? And whats the guidance if any on them? Example

    Cut Stack (test p 75mg/ml, tren a 50mg/ml, masteron 50mg/ml) 40mls @ 175mg/ml
    3g test prop powder
    2g tren a powder
    2g masteron powder
    15ml EO
    10.6ml GSO
    1.2ml BA (3%)
    8ml BB (20%)

    is this one dose? How often would you take it?

    Last edited by Presser; 01-14-2024 at 11:59 AM.
    LMAO Treansaurushex Laughed Ass Off
     

  45. #45

    Join Date
    Mar 2017
    Posts
    0
    Rep Power
    0

    Default

    You sir are a jackass
     

  46. #46
    Iron Game's Avatar
    Join Date
    Apr 2008
    Location
    MD
    Age
    51
    Posts
    5,060
    Rep Power
    2147488723

    Default

    Quote Originally Posted by Treansaurushex View Post
    You sir are a jackass
    Very nice first post! It doesn't even make sense. Peace out asshole.

    Iron-Banned
    Likes Presser liked this post
     
    Your Character Is In Your DEEDS. Not Your Dreams!

    Follow Me twitter Iron-Game

  47. #47
    t.c.jones's Avatar
    Join Date
    Feb 2015
    Posts
    0
    Rep Power
    0

    Default

    Quote Originally Posted by Treansaurushex View Post
    You sir are a jackass
    Another one bites the dust!!!!
    Likes Presser liked this post
     

  48. #48
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,682
    Rep Power
    2147525351

    Default

    Compounding Instructions Updated Into Easy Readable Tables!
    Powder Conversion Recipies

Similar Threads

  1. A couple of pre contest diets - good guide's to dieting !!!
    By Chris250 in forum MuscleChemistry Discussion
    Replies: 9
    Last Post: 07-15-2015, 04:21 PM
  2. Test Prop/Mast Prop Combo Conversion Problem
    By josey wales in forum Steroid Powder Recipe Discussion
    Replies: 12
    Last Post: 06-03-2014, 12:49 PM
  3. 10 Awesome Protein shake recipies
    By MrPerfect in forum Diet & Nutrition Forum
    Replies: 13
    Last Post: 03-24-2014, 09:30 AM
  4. Removal of pyrogen from IGF powder
    By swolepapa in forum Peptide HGH IGF 1 Discussion
    Replies: 9
    Last Post: 06-25-2005, 08:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in