1. #1
    MuscleChemistry Registered Member Board Certified MD
    guardianactual's Avatar
    Join Date
    Mar 2014
    Posts
    2,150
    Rep Power
    2147485808

    Default INJECTABLE RECIPES And experimental high dose recipes.

    You will notice that it is incredible simple to produce steroids from your own home, guaranteeing dosage, guaranteeing quality. There are three simple ingredients each time; the Hormone (Raw) / Steroid Powder, Benzyl Benzoate and Benzyl Alcohol. But it is the ratio of these three products and chemicals that is most important.

    What are*Benzyl-Alzohol & Benzyl Benzoate and what purpose do they serve?

    Benzyl Benzoate is a solvent, what this means is that solutes such as Steroid and Hormone powders dissolve easily in it, and that is the main purpose of it's use in steroids, to dissolve and*keep the Raw Hormone Powder*suspended within the oil. If the correct amount of this solvent is not used the Hormone Powder will start to 'undissolve' from the solution causing the product to 'Crash' (Become Cloudy / Crystallised).



    Some Hormone Powders dissolve more easily than others and therefore in such cases less Benyl Benzoate can be used. The fact that varying the amount of the solvent is required to ensure that Steroids are product correctly and won't crash out of suspension is why having this page as a handy resource is so important.

    Benzyl Alcohol*is just at ype of alcohol. It is used in steroids to preserve the suspension for months, even years without and reducition in sterility. Alcohol is an anti-bacterial disinfectant *and is used as such in many industries. As previously mentioned Benzyl Aclhol ensures that the finished product maintains its sterility when used in the right concentration however, if too much of it is used the Steroid will be painful to inject and may cause Post injection soreness / pain (PIP).

    Some of the recipes below are our own formulation or formulations from the Labs that we supply.

    All recipes here are for making 10ml (the equivalent of 1 x 10ml Vial, so if you wish to make 40ml multiply the recipe by four or 100ml multiply it by 10, by giving you the recipe for 10ml we make it easy for you to calculate the recipe for any quantity.*The Oil we recommend is Grapeseed Oil. We will abbreviate Benzyl Alcohol to BA and Benzyl Benzoate to BB.

    Testosterone Enanthate 250mg/ml - 10ml
    6.44ml Oil
    2.5g Testosterone Enanthate Powder
    0.2ml BA (2%)
    1ml BB (10%)

    Nandrolone Phenylpropionate (NPP) 100mg/ml - 10ml
    6.92ml Oil
    1g Nandrolone Phenylpropionate Powder
    0.2ml BA (2%)
    2ml BB (20%)

    Nandrolone Phenylpropionate (NPP) 200mg/ml - 10ml
    6.03ml Oil
    2g Nandrolone Phenylpropionate Powder
    0.2ml BA (2%)
    2ml BB (20%)

    Testosterone Propionate 100mg/ml - 10ml
    6.89ml Oil
    1g Testosterone Popionate Powder
    0.2ml BA (2%)
    2ml BB (20%)

    Trenbolone Acetate 100mg/ml - 10ml
    6.95ml Oil
    1g Trenbolone Acetate*Powder
    0.2ml BA (2%)
    2ml BB (20%)

    Masteron (Drostanolone Propionate) 100mg/ml - 10ml
    6.95ml Oil
    1g Drostanolone Propionate Powder
    0.2ml BA (2%)
    2ml BB (20%)

    Equipose (Boldenone Undecylenate) 250mg/ml - 10ml
    5.88ml Oil
    2.5g Boldenone Undecylenate Liquid
    0.2ml BA (2%)
    1.8ml BB (18%)

    Primobolan (Methenolone Enanthate) 100mg/ml - 10ml
    6.95ml Oil
    1g Methenolone Enanthate Powder
    0.2ml BA (2%)
    2ml BB (20%)

    Deca Durabolin (Nandrolone Decanoate) 250mg/ml - 10ml
    7.24ml Oil
    2.5g Nandrolone Decanoate*Powder
    0.3ml BA (3%)
    1.5ml BB (15%)

    Sustanon (Four Ester Testosterone Blend) 250mg/ml - 10ml
    7.125ml Oil
    0.3g Testosterone Propionate Powder
    0.6g Testosterone Phenylpropionate Powder
    0.6g Testosterone Isocaproate Powder
    10g Testosterone Decanoate Powder
    0.25ml BA (2.5%)
    0.75ml BB (7.5%)

    Injectable Stanozolol (Winstrol) Suspension 100mg/ml*- 10ml (UNTESTED)
    6.25ml DISTILLED Water (ONLY DISTILLED WATER!)
    1g Stanozolol
    0.3ml BA (3%)
    2.4ml BB (24%)
    0.3ml PS80 (Polysorbate 80) (3%)

    Combine Stanozolol Powder, BA, BB, PS80 and heat until clear whils swirling or using a stir bar
    Filter slowly with a Sterile 0.22um Filter/Syringe filter directly into a Sterile Vial/Media Bottle
    Filter the Destilled water with a NEW (Different)*Sterile 0.22um Filter into the Vial - Keep swirling as you filter in the distilled water.
    Shake the Winstrol in the Vial/Media Bottle vigorously for a few minutes.
    BOOM! You now have 10ml of Stanozolol / Winstrol Suspension @ 100mg/ml
    NOTE: Your final solution will look a little foamy or airty. After you have shaken it vigorously let it sit untouched for 3 days. You will see it settle and the water become seperate on top, this is usual. This will not ve very micronised and settling out will take days so do not be concerned.

    This will produce the standard PIP of Winstrol found in all underground lab products. It is not totally Pain Free, but not extremely painful either.

    HIGH DOSAGE / BLENDS -*UNTESTED BUT SHOULD WORK (FEEL FREE TO GIVE US FEEDBACK)

    Testosterone Enanthate 600mg/ml - 10ml (UNTESTED)
    0.83ml GSO
    6g Testosterone Enanthate
    2.5ml EO (Ethyl Oleate)
    0.3ml BA (3%)
    1ml BB (10%

    Trenbolone Enanthate 125mg/ml, Drostanolone (Masteron) Enanthate 125mg/ml, Testosterone Enanthate 125mg/ml (375mg/ml) - 10ml (UNTESTED)
    3.6ml GSO
    1.25g Trenbolone Enanthate
    1.25g Drostanolone Enanthate
    1.25g Testosterone Enanthate
    0.3ml BA
    3ml BB

    Trenbolone Enanthate 250mg/ml, Drostanolone (Masteron) Enanthate 250mg/ml (UNTESTED)
    1ml GSO
    2.5g Trenbolone Enanthate
    2.5g Drostanolone (Masteron) Enanthate
    1.5ml EO
    0.3ml BA
    3ml BB











    Disclaimer: This information is provided for educational purposes only and should be used responsibly and legally by qualified individuals. The untested recipes are provided as-is and should be approached with caution.
    Last edited by Presser; 01-14-2024 at 12:30 PM.
     
    WICKR name:
    User12701978

    You must believe in yourself enough now, to become the person, others will remember you for later

    Our greatest fear is not that we are inadequate, Our greatest fear is that we are powerful beyond measure.

  2. #2
    Stage Pro Board Certified MD
    gandhisays's Avatar
    Join Date
    Dec 2008
    Posts
    8,927
    Rep Power
    2147492590

    Default

    this should b made a sticky thread.useful for a lot of us
    Thanks guardianactual thanked for this post
    Likes chem_chef82 liked this post
     

  3. #3
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,686
    Rep Power
    2147525355

    Default

    making this a sticky thread! Good Post guys!
    Thanks guardianactual thanked for this post
     
    INJECTABLE RECIPES And experimental high dose recipes.

  4. #4
    MuscleChemistry Registered Member Board Certified MD
    guardianactual's Avatar
    Join Date
    Mar 2014
    Posts
    2,150
    Rep Power
    2147485808

    Default

    Honestly I kinda wanted to post a sticky worthy article... LMAO BBer mindset? Set a goal & do it LMAO plus I'm licking my wounds so I have more down time although I'm caught up on laundry & school.. Hopefully my body allows me 2 lift we shall see.
    Likes northface29000 liked this post
     
    WICKR name:
    User12701978

    You must believe in yourself enough now, to become the person, others will remember you for later

    Our greatest fear is not that we are inadequate, Our greatest fear is that we are powerful beyond measure.

  5. #5
    MuscleChemistry Newbie Residency Training

    Join Date
    Sep 2014
    Posts
    11
    Rep Power
    0

    Default

    The test e 600 consider tested kind of.
    I used mct instead of gso
    2%ba
    20%bb
    no eo
    Thanks big_iron_up thanked for this post
    Likes big_iron_up liked this post
     

  6. #6
    MuscleChemistry Vet Board Certified Psy.D
    Zao's Avatar
    Join Date
    Dec 2013
    Posts
    311
    Rep Power
    2147483969

    Default

    Quote Originally Posted by Brandx View Post
    The test e 600 consider tested kind of.
    I used mct instead of gso
    2%ba
    20%bb
    no eo
    It works? It gave PIP? No crash?
     

  7. #7
    MuscleChemistry Newbie Residency Training

    Join Date
    Sep 2014
    Posts
    11
    Rep Power
    0

    Default

    Quote Originally Posted by Zao View Post
    It works? It gave PIP? No crash?
    Yes works great I had pretty much zero pip and it never crashed. I ran 4ml a week for a few weeks to test it.
     

  8. #8
    MuscleChemistry Vet Board Certified Psy.D
    Zao's Avatar
    Join Date
    Dec 2013
    Posts
    311
    Rep Power
    2147483969

    Default

    Ty!
     

  9. #9
    MuscleChemistry Newbie Residency Training
    Endomorph's Avatar
    Join Date
    May 2013
    Posts
    17
    Rep Power
    0

    Default

    Looking for a Mast E 300mg recipe, who can help?
     

  10. #10
    MuscleChemistry Registered Member Board Certified Psy.D
    viciouscycle's Avatar
    Join Date
    Sep 2013
    Posts
    168
    Rep Power
    2147483826

    Default

    Try this for 300mg Mast e
    40mls @ 300mgs/ml

    12g powder
    11.8ml EO
    10ml GSO
    1.2ml BA (3%)
    8ml BB (20%)
    Thanks hkroids7 thanked for this post
    Likes hkroids7 liked this post
     

  11. #11
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    Deca for 10 grams
    Needed
    10 grams powder (ND per 1 gram displaces .962 MLs)
    12.13 ml sesame oil (or grapeseed oil-my favorite-can also be mixed half and half with EO if your body can tolerate it)
    .75ml BA 3%
    2.50ml BB 10%
    Syringes
    Vial -with stopper or sterile glass measuring cup
    Sterile Vial -sealed
    Whatman sterile filter .22

    1. Weigh out 10 grams of powder.
    2. Place powder in vial.
    3. Add BA & BB to the vial.-swirl do not shake-add slowly to keep from clumping
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a glass beaker and cover with foil. Also heat more oil than you need, as you will not be able to get it all out of the beaker and you will need extra to finish the filtration.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial. and swirl
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a small cast iron pan and place it in the oven.
    7. Next Place a 18 gauge needle in the sterile vial attach Whatman sterile filter.I use a .22 membrane for organic material
    8. Place another needle, 25gaor smaller is plenty, in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.

    Makes 25 ml @ 400 mg/ml

    You reduce the BA to decrease pain and it will still decrease the promotion of bacteria growth, increase the BB to increase viscosity and help the solution stay stable at the high mg/ml concentration.
    The addition of grape seed or EO can reduce thickness and I recommend a 23g but a 25 is fine it just takes some time if straight sesame is used.

    Always clean your work area with bleach and water and sterilize all materials with alcohol 91% wear gloves or thoroughly clean your hands before beginning. Remember the finished product is considered a food product and has an expiration date so always make before use and do not store in sunlight or heat.
    This is my own recipe and I use it myself-it has been posted on other boards but they keep changing it so here it is here as the original. You are welcome to change it, however its this way for a reason.
    Thanks Presser, New user, BEASTZ6, hkroids7 thanked for this post
     

  12. #12
    MuscleChemistry Registered Member Board Certified Psy.D

    Join Date
    May 2014
    Posts
    106
    Rep Power
    177

    Default

    Great info! I want to eventually start brewing my own oral and injectables. I've been reading a good bit about it. There any legit articles that I should go by to learn the process?
     

  13. #13
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    Quote Originally Posted by Ron J View Post
    Great info! I want to eventually start brewing my own oral and injectables. I've been reading a good bit about it. There any legit articles that I should go by to learn the process?
    Im not sure what you mean by "legit articles" to learn by..Break it down barney style for me so I understand what you mean.
     

  14. #14
    MuscleChemistry Registered Member Board Certified Psy.D

    Join Date
    May 2014
    Posts
    106
    Rep Power
    177

    Default

    Something I can trust. I'm sure there's a lot of misguided info on the web.
     

  15. #15
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    There are and honestly thats the web for ya, some things are legit and some are not. However if its here at MC, I would say you have a great chance of success by following the veterans guides on this. I can honestly say some of my own recipes are the exact ones on here and they have worked great for me.
    Likes Presser, joetkilla1 liked this post
     

  16. #16
    MuscleChemistry Registered Member Board Certified Psy.D

    Join Date
    May 2014
    Posts
    106
    Rep Power
    177

    Default

    Thanks bro!
    Likes Presser liked this post
     

  17. #17
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    No Problem. If you try any of the above recipes feel free to ask if you have any questions before you get started.
    Likes jojo111 liked this post
     

  18. #18
    MuscleChemistry Registered Member Board Certified Psy.D

    Join Date
    May 2014
    Posts
    106
    Rep Power
    177

    Default

    I'm sure I will. Seems pretty straightforward. Not too sure on the filtering process tho.
     

  19. #19

    Join Date
    Apr 2015
    Posts
    0
    Rep Power
    0

    Default

    Thanks PG. Can your Deca recipe be used with test decanoate as well?
     

  20. #20
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    You can use the test prop recipe with test dec. It will wwork better but decrease the BA content to no more than 1.9mls per total volume.
     

  21. #21
    MuscleChemistry Guru Board Certified MD
    charliebigspuds's Avatar
    Join Date
    Jan 2009
    Location
    london town
    Posts
    2,127
    Rep Power
    2147485790

    Default

    so some thing like this POWDERGUY..


    TEST DECA
    30ML @ 333MG
    20.1ML OIL
    10G POWDER
    .6ML BA 2%
    1.8ML BB 6%
    I AINT NO ROCKET SCIENTIST, I DON'T CLIMB MOUNTAINS, I DON'T PLAY "SQUASH", I DON'T KNIT, OR BASKET WEAVE, IM A MUTHA FUCKIN, WEIGHT LIFTER!!! AND I PICK SHIT UP!!!!

  22. #22
    MuscleChemistry Guru Board Certified MD
    charliebigspuds's Avatar
    Join Date
    Jan 2009
    Location
    london town
    Posts
    2,127
    Rep Power
    2147485790

    Default

    sorry i think i got this wrong..

    30ml @ 333mg
    16.11 ml oil
    10gram powder
    .6ml ba 2%
    6ml bb 20%

    but that seems alot of BB ??

    would this be better

    17.6ml oil
    10gram powder
    .6ml ba 2%
    4.5ml bb 15%

    - - - Updated - - -

    by the way using GSO
    I AINT NO ROCKET SCIENTIST, I DON'T CLIMB MOUNTAINS, I DON'T PLAY "SQUASH", I DON'T KNIT, OR BASKET WEAVE, IM A MUTHA FUCKIN, WEIGHT LIFTER!!! AND I PICK SHIT UP!!!!

  23. #23
    MuscleChemistry Guru Board Certified MD
    charliebigspuds's Avatar
    Join Date
    Jan 2009
    Location
    london town
    Posts
    2,127
    Rep Power
    2147485790

    Default

    Bump for powder guy
    I AINT NO ROCKET SCIENTIST, I DON'T CLIMB MOUNTAINS, I DON'T PLAY "SQUASH", I DON'T KNIT, OR BASKET WEAVE, IM A MUTHA FUCKIN, WEIGHT LIFTER!!! AND I PICK SHIT UP!!!!

  24. #24
    MuscleChemistry Guru Board Certified MD
    charliebigspuds's Avatar
    Join Date
    Jan 2009
    Location
    london town
    Posts
    2,127
    Rep Power
    2147485790

    Default

    Bump for any one lol.
    I AINT NO ROCKET SCIENTIST, I DON'T CLIMB MOUNTAINS, I DON'T PLAY "SQUASH", I DON'T KNIT, OR BASKET WEAVE, IM A MUTHA FUCKIN, WEIGHT LIFTER!!! AND I PICK SHIT UP!!!!

  25. #25
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    The second one would be best. Sorry it took so long I had to actually review it a few times first. I would not use so much BB with deca, replace the difference with oil.
    10% BB with Deca is fine. The BA at .6mls is good with 30mls.

    17.6ml oil
    10gram powder
    .6ml ba 2%
    4.5ml bb 15%

    this is the one I would go with. Make sure you add powder first, then solvent then heat slightly and mix until its clear, then oil then filter
     

  26. #26
    MuscleChemistry Guru Board Certified MD
    charliebigspuds's Avatar
    Join Date
    Jan 2009
    Location
    london town
    Posts
    2,127
    Rep Power
    2147485790

    Default

    Thanks brother. I always add powder first. Is there any AAS you should not add powder first??

    Ive also been smelling and feeling gear as you suggested many moons ago. Good to get to know the difference. Never bothered beforehand.
    Likes Presser liked this post
     
    I AINT NO ROCKET SCIENTIST, I DON'T CLIMB MOUNTAINS, I DON'T PLAY "SQUASH", I DON'T KNIT, OR BASKET WEAVE, IM A MUTHA FUCKIN, WEIGHT LIFTER!!! AND I PICK SHIT UP!!!!

  27. #27

    Join Date
    Apr 2015
    Posts
    0
    Rep Power
    0

    Default

    I had some nandrolone decanoate and some testosterone decanoate from one of the board sponsors but they were labelled 1 and 2 (???) so I came up with a recipe that should work to make 400mg/mL for both:

    10g powder (displaces 9.62mL)
    3% BA (0.75mL)
    20% BB (5mL)
    9.63mL GSO

    The recipe worked well for both and they're holding nicely. They're viscous but it just means going slowly with a 25G.

    A friend ran the raws on a GCMS at his work to ID them for me and the purity looks good. I'll post the chromatograms and mass spectra later.
    Thanks Mindstorm thanked for this post
     

  28. #28

    Join Date
    Apr 2015
    Posts
    0
    Rep Power
    0

    Default

    Quote Originally Posted by drb2014 View Post
    I had some nandrolone decanoate and some testosterone decanoate from one of the board sponsors... I'll post the chromatograms and mass spectra later...
    INJECTABLE RECIPES And experimental high dose recipes.-deca.png

    INJECTABLE RECIPES And experimental high dose recipes.-test-d.png

    The Deca is 92% pure and the Test D 99% pure by peak areas.

    The matches score 99 (out of a possible 100) with partial matches for NPP (9) and Test E (heptanoate, 68) since they're such similar compounds.

    Is there somewhere better to post a discussion of the results? I'm new to this board.

    Dr B
    Attached Thumbnails Attached Thumbnails INJECTABLE RECIPES And experimental high dose recipes.-test-d.png   INJECTABLE RECIPES And experimental high dose recipes.-deca.png  
    Likes BEASTZ6, Unforgiven21 liked this post
     

  29. #29
    MuscleChemistry Newbie Board Certified D.V.M.

    Join Date
    Nov 2013
    Posts
    29
    Rep Power
    0

    Default

    Great info guys!!!! So I should be fine making my NPP with just 2% BA and 20% BB? What is the max temp I should go and for how long? I will be using a hot plate stirrer.

    Thanks guys
     

  30. #30
    MuscleChemistry Guru Board Certified CPH
    BEASTZ6's Avatar
    Join Date
    Jan 2009
    Posts
    1,750
    Rep Power
    2147485413

    Default

    I am going to use PG's deca recipe. I just happen to have 10 gr of deca raws sitting around....lol
     

  31. #31
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    Quote Originally Posted by Pork Chop View Post
    Great info guys!!!! So I should be fine making my NPP with just 2% BA and 20% BB? What is the max temp I should go and for how long? I will be using a hot plate stirrer.

    Thanks guys
    There is a tried and true NPP recipe bro. The BB is to high, lower that. Depending on volume you can lower the BA as well.
    Likes Presser liked this post
     

  32. #32
    6-fingers's Avatar
    Join Date
    Jun 2015
    Location
    Somewhere between Moscow and Shanghai
    Posts
    0
    Rep Power
    0

    Default

    Quote Originally Posted by Pork Chop View Post
    Great info guys!!!! So I should be fine making my NPP with just 2% BA and 20% BB? What is the max temp I should go and for how long? I will be using a hot plate stirrer.

    Thanks guys
    Do not be so concerned about particular temperature or time period, as heating media is merely means of reducing time it takes for hormone to reach solution. So time could be marked by moment media is clear and has attained full solution. Actively stirred media should reach full solution well before 100 degrees Celsius. But again, heating is merely speeding up action of solvents and excipients.
     

  33. #33
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    Quote Originally Posted by Pork Chop View Post
    Great info guys!!!! So I should be fine making my NPP with just 2% BA and 20% BB? What is the max temp I should go and for how long? I will be using a hot plate stirrer.

    Thanks guys
    You have to remember this is max solvents/preservative when you say 2% and 20% this is max. You can use less and its dependent on total volume. BB will also give you PIP if too much is used and its a thinner not a preservative. BA is the microbial preservative and 1.9ml is usually the max on lower volume solutions.
     

  34. #34
    6-fingers's Avatar
    Join Date
    Jun 2015
    Location
    Somewhere between Moscow and Shanghai
    Posts
    0
    Rep Power
    0

    Default

    These are solutions I have formulated and which are currently being tested thru intramuscular injection, in hopes of adding to list of finished line of products.. Please note that Proprietary Oil is not something you can purchase. It is commercially unavailable product which I managed to obtai,after which my chemist tweaked and altered it into its present state. Please excuse my vagueness, but this excipient is what makes my finished line so unique. It has allowed us to use in following two compoundings, No EO, No Guaiacol. A standard 1.9% BA and only 10% BB, yet go high concentration. It has, in my opinion, potential to change AAS industry drastically. The following solutions have not only held, but they have had no problem doing so after being kept in refrigeration for 6 hours. The solution is also thin enough to draw from vial with 30g slin pin, though it is relatively slow, taking approximately 2 minutes 40 seconds to draw 1ml. However, using a 30g slin pin to administer with, 1ml takes less than one second to administer, if individual is so inclined to inject this quickly.

    Trenbolone Acetate 220mg/ml - 10ml
    6.94ml Proprietary Oil
    2.2g Trenbolone Acetate powder
    0.19ml BA (1.9%)
    1.00ml BB (10%)


    T/M 500 blend (Trenbolone Enanthate, Drostanolone Enanthate) 500mg/ml - 10ml
    4.56ml Proprietary Oil
    2.5g Trenbolone Enanthate powder
    2.5g Drostanolone Enanthate powder
    0.19ml BA (1.9%)
    1.00ml BB (10%)



    Last edited by Presser; 01-14-2024 at 12:36 PM.
    Likes Lddm22, Unforgiven21 liked this post
     

  35. #35

    Join Date
    Apr 2015
    Posts
    0
    Rep Power
    0

    Default

    I got some more raws from a board sponsor and ran them on a GCMS again - close enough to 100% purity.

    I brewed test u and Eq at 500mg/ml.
    10g powder (tu) or oil (Eq)
    0.5ml BA (2%)
    4ml BB (20%)
    4ml GSO
    4ml EO

    It will hold without EO but even with the EO it's really viscous and takes a long time to filter/draw up/inject.
    I'll use all EO without any GSO next time or use the 400mg/ml recipe I've posted for test d and Deca.

    The test u, test d and Deca were pretty much 100% pure by peak area.

    The Eq was too viscous to draw up with an 18 gauge needle so I diluted it with BB and then a more volatile solvent for GCMS analysis.
    It's purity comes out at about 30% but that's because about 70% of the sample is BB.

    More good raws!

    I love long esters because it's so easy to make high concentration oils with no PIP.
    Attached Thumbnails Attached Thumbnails INJECTABLE RECIPES And experimental high dose recipes.-nandrolone-decanoate.jpg   INJECTABLE RECIPES And experimental high dose recipes.-test-decanoate.jpg   INJECTABLE RECIPES And experimental high dose recipes.-test-undecanoate.jpg   INJECTABLE RECIPES And experimental high dose recipes.-boldenone-undecylenate.jpg  
     

  36. #36
    MuscleChemistry Junior Member Board Certified Psy.D
    mroldguy's Avatar
    Join Date
    Jul 2015
    Posts
    246
    Rep Power
    2147483902

    Default

    Dang, this is packed full of great info!!! Nice thread.
     

  37. #37
    Banana Residency Training

    Join Date
    May 2015
    Posts
    1
    Rep Power
    0

    Default

    Thank you for all the good info! I noticed you said you supply to places. I'm looking for a powder supplier of all flavors. Can you help me out?
     

  38. #38
    MuscleChemistry Registered Member Board Certified Psy.D

    Join Date
    May 2014
    Posts
    106
    Rep Power
    177

    Default

    Quote Originally Posted by Lddm22 View Post
    Thank you for all the good info! I noticed you said you supply to places. I'm looking for a powder supplier of all flavors. Can you help me out?
    Good way to get banned bro!
    Likes Presser liked this post
     

  39. #39
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,686
    Rep Power
    2147525355

    Default

    lesson to everyone lmao, read the fucking rules lmao
    Thanks Ron J thanked for this post
     
    INJECTABLE RECIPES And experimental high dose recipes.

  40. #40

    Join Date
    Oct 2016
    Posts
    0
    Rep Power
    0

    Default

    recipe for premix sustanon?
    300mg/m for 50Ml and 250mg/ml

    And for dbol at 50mg/ml for 50ml

    And Decca at 300mg/ml for 50ml

    And anadrol 100mg/ml for 50ml
    Thx


    Sent from my iPhone using Tapatalk
     

  41. #41
    MuscleChemistry Newbie Residency Training

    Join Date
    Oct 2016
    Location
    Hong Kong
    Posts
    8
    Rep Power
    0

    Default

    Perfect. MCT oil could be another solution to EO allergy and high dosage. No pip and holding well. This is incredible. Big thanks, bro
    Quote Originally Posted by Brandx View Post
    Yes works great I had pretty much zero pip and it never crashed. I ran 4ml a week for a few weeks to test it.
     

  42. #42
    MuscleChemistry Newbie Residency Training

    Join Date
    Oct 2016
    Location
    Hong Kong
    Posts
    8
    Rep Power
    0

    Default

    Perfect. MCT oil could be a solution to EO allergy and high dosage. No pip and holding well. This is incredible. Big thanks, Brandx
    Quote Originally Posted by Brandx View Post
    Yes works great I had pretty much zero pip and it never crashed. I ran 4ml a week for a few weeks to test it.
     

  43. #43
    Unforgiven21's Avatar
    Join Date
    Jan 2017
    Posts
    0
    Rep Power
    0

    Default

    Can u pm me i have some questions
     

  44. #44
    Unforgiven21's Avatar
    Join Date
    Jan 2017
    Posts
    0
    Rep Power
    0

    Default

    Id like buy some of is proprietary oil or makein highmg. Pl essage me
     

  45. #45
    MuscleChemistry Guru Board Certified CPH
    BEASTZ6's Avatar
    Join Date
    Jan 2009
    Posts
    1,750
    Rep Power
    2147485413

    Default

    ^^^^ Unforgiven. 6 Fingers is long gone my friend. So we are only left to speculate as to the nature of his so-called proprietary oil.
    Thanks Unforgiven21 thanked for this post
     

  46. #46
    MuscleChemistry Newbie Residency Training

    Join Date
    Jul 2017
    Posts
    1
    Rep Power
    0

    Default

    Is primo ace only cooked as suspension (ie, not in oil)?
     

  47. #47

    Join Date
    Jul 2017
    Posts
    0
    Rep Power
    0

    Default

    Newbie question but where do I store the liquid and do you measure out with a pippete?
     

  48. #48
    MuscleChemistry Newbie Residency Training

    Join Date
    Aug 2019
    Posts
    1
    Rep Power
    0

    Default

    Any recipes for stanolone

    Sent from my Moto Z (2) using Tapatalk
     

  49. #49
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,686
    Rep Power
    2147525355

    Default

    All Compounding Instructions Have Been Converted Into Easily Read Tables!

    Thank you
    INJECTABLE RECIPES And experimental high dose recipes.

Similar Threads

  1. Injectable drol recipes
    By Tough old Man in forum Steroid Powder Recipe Discussion
    Replies: 5
    Last Post: 06-11-2017, 11:40 AM
  2. Trenbolone Acetate injectable Conversion Recipes 10 and 20 gram Tren Ace Powder
    By gandhisays in forum Steroid Powder Recipe Discussion
    Replies: 1
    Last Post: 06-18-2014, 05:27 AM
  3. Need some recipes!!
    By bigfreak in forum Steroid Powder Recipe Discussion
    Replies: 3
    Last Post: 04-05-2009, 07:40 AM
  4. need recipes
    By fallen1976 in forum Steroid Powder Recipe Discussion
    Replies: 4
    Last Post: 08-20-2004, 01:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in