INJECTABLE RECIPES And experimental high dose recipes.

You will notice that it is incredible simple to produce steroids from your own home, guaranteeing dosage, guaranteeing quality. There are three simple ingredients each time; the Hormone (Raw) / Steroid Powder, Benzyl Benzoate and Benzyl Alcohol. But it is the ratio of these three products and chemicals that is most important.

What are*Benzyl-Alzohol & Benzyl Benzoate and what purpose do they serve?

Benzyl Benzoate is a solvent, what this means is that solutes such as Steroid and Hormone powders dissolve easily in it, and that is the main purpose of it's use in steroids, to dissolve and*keep the Raw Hormone Powder*suspended within the oil. If the correct amount of this solvent is not used the Hormone Powder will start to 'undissolve' from the solution causing the product to 'Crash' (Become Cloudy / Crystallised).



Some Hormone Powders dissolve more easily than others and therefore in such cases less Benyl Benzoate can be used. The fact that varying the amount of the solvent is required to ensure that Steroids are product correctly and won't crash out of suspension is why having this page as a handy resource is so important.

Benzyl Alcohol*is just at ype of alcohol. It is used in steroids to preserve the suspension for months, even years without and reducition in sterility. Alcohol is an anti-bacterial disinfectant *and is used as such in many industries. As previously mentioned Benzyl Aclhol ensures that the finished product maintains its sterility when used in the right concentration however, if too much of it is used the Steroid will be painful to inject and may cause Post injection soreness / pain (PIP).

Some of the recipes below are our own formulation or formulations from the Labs that we supply.

All recipes here are for making 10ml (the equivalent of 1 x 10ml Vial, so if you wish to make 40ml multiply the recipe by four or 100ml multiply it by 10, by giving you the recipe for 10ml we make it easy for you to calculate the recipe for any quantity.*The Oil we recommend is Grapeseed Oil. We will abbreviate Benzyl Alcohol to BA and Benzyl Benzoate to BB.

Testosterone Enanthate 250mg/ml - 10ml
6.44ml Oil
2.5g Testosterone Enanthate Powder
0.2ml BA (2%)
1ml BB (10%)

Nandrolone Phenylpropionate (NPP) 100mg/ml - 10ml
6.92ml Oil
1g Nandrolone Phenylpropionate Powder
0.2ml BA (2%)
2ml BB (20%)

Nandrolone Phenylpropionate (NPP) 200mg/ml - 10ml
6.03ml Oil
2g Nandrolone Phenylpropionate Powder
0.2ml BA (2%)
2ml BB (20%)

Testosterone Propionate 100mg/ml - 10ml
6.89ml Oil
1g Testosterone Popionate Powder
0.2ml BA (2%)
2ml BB (20%)

Trenbolone Acetate 100mg/ml - 10ml
6.95ml Oil
1g Trenbolone Acetate*Powder
0.2ml BA (2%)
2ml BB (20%)

Masteron (Drostanolone Propionate) 100mg/ml - 10ml
6.95ml Oil
1g Drostanolone Propionate Powder
0.2ml BA (2%)
2ml BB (20%)

Equipose (Boldenone Undecylenate) 250mg/ml - 10ml
5.88ml Oil
2.5g Boldenone Undecylenate Liquid
0.2ml BA (2%)
1.8ml BB (18%)

Primobolan (Methenolone Enanthate) 100mg/ml - 10ml
6.95ml Oil
1g Methenolone Enanthate Powder
0.2ml BA (2%)
2ml BB (20%)

Deca Durabolin (Nandrolone Decanoate) 250mg/ml - 10ml
7.24ml Oil
2.5g Nandrolone Decanoate*Powder
0.3ml BA (3%)
1.5ml BB (15%)

Sustanon (Four Ester Testosterone Blend) 250mg/ml - 10ml
7.125ml Oil
0.3g Testosterone Propionate Powder
0.6g Testosterone Phenylpropionate Powder
0.6g Testosterone Isocaproate Powder
10g Testosterone Decanoate Powder
0.25ml BA (2.5%)
0.75ml BB (7.5%)

Injectable Stanozolol (Winstrol) Suspension 100mg/ml*- 10ml (UNTESTED)
6.25ml DISTILLED Water (ONLY DISTILLED WATER!)
1g Stanozolol
0.3ml BA (3%)
2.4ml BB (24%)
0.3ml PS80 (Polysorbate 80) (3%)

Combine Stanozolol Powder, BA, BB, PS80 and heat until clear whils swirling or using a stir bar
Filter slowly with a Sterile 0.22um Filter/Syringe filter directly into a Sterile Vial/Media Bottle
Filter the Destilled water with a NEW (Different)*Sterile 0.22um Filter into the Vial - Keep swirling as you filter in the distilled water.
Shake the Winstrol in the Vial/Media Bottle vigorously for a few minutes.
BOOM! You now have 10ml of Stanozolol / Winstrol Suspension @ 100mg/ml
NOTE: Your final solution will look a little foamy or airty. After you have shaken it vigorously let it sit untouched for 3 days. You will see it settle and the water become seperate on top, this is usual. This will not ve very micronised and settling out will take days so do not be concerned.

This will produce the standard PIP of Winstrol found in all underground lab products. It is not totally Pain Free, but not extremely painful either.

HIGH DOSAGE / BLENDS -*UNTESTED BUT SHOULD WORK (FEEL FREE TO GIVE US FEEDBACK)

Testosterone Enanthate 600mg/ml - 10ml (UNTESTED)
0.83ml GSO
6g Testosterone Enanthate
2.5ml EO (Ethyl Oleate)
0.3ml BA (3%)
1ml BB (10%

Trenbolone Enanthate 125mg/ml, Drostanolone (Masteron) Enanthate 125mg/ml, Testosterone Enanthate 125mg/ml (375mg/ml) - 10ml (UNTESTED)
3.6ml GSO
1.25g Trenbolone Enanthate
1.25g Drostanolone Enanthate
1.25g Testosterone Enanthate
0.3ml BA
3ml BB

Trenbolone Enanthate 250mg/ml, Drostanolone (Masteron) Enanthate 250mg/ml (UNTESTED)
1ml GSO
2.5g Trenbolone Enanthate
2.5g Drostanolone (Masteron) Enanthate
1.5ml EO
0.3ml BA
3ml BB

---

---

---

---

---

Disclaimer: This information is provided for educational purposes only and should be used responsibly and legally by qualified individuals. The untested recipes are provided as-is and should be approached with caution.

this should b made a sticky thread.useful for a lot of us

making this a sticky thread! Good Post guys!

Honestly I kinda wanted to post a sticky worthy article... LMAO BBer mindset? Set a goal & do it LMAO plus I'm licking my wounds so I have more down time although I'm caught up on laundry & school.. Hopefully my body allows me 2 lift we shall see.

The test e 600 consider tested kind of.
I used mct instead of gso
2%ba
20%bb
no eo

Brandx said:

The test e 600 consider tested kind of.
I used mct instead of gso
2%ba
20%bb
no eo

Click to expand...

It works? It gave PIP? No crash?

Zao said:

It works? It gave PIP? No crash?

Click to expand...

Yes works great I had pretty much zero pip and it never crashed. I ran 4ml a week for a few weeks to test it.

Ty!

Looking for a Mast E 300mg recipe, who can help?

Try this for 300mg Mast e
40mls @ 300mgs/ml

12g powder
11.8ml EO
10ml GSO
1.2ml BA (3%)
8ml BB (20%)

Great info! I want to eventually start brewing my own oral and injectables. I've been reading a good bit about it. There any legit articles that I should go by to learn the process?

Ron J said:

Great info! I want to eventually start brewing my own oral and injectables. I've been reading a good bit about it. There any legit articles that I should go by to learn the process?

Click to expand...

Im not sure what you mean by "legit articles" to learn by..Break it down barney style for me so I understand what you mean.

Something I can trust. I'm sure there's a lot of misguided info on the web.

There are and honestly thats the web for ya, some things are legit and some are not. However if its here at MC, I would say you have a great chance of success by following the veterans guides on this. I can honestly say some of my own recipes are the exact ones on here and they have worked great for me.

Thanks bro!

No Problem. If you try any of the above recipes feel free to ask if you have any questions before you get started.

I'm sure I will. Seems pretty straightforward. Not too sure on the filtering process tho.

Thanks PG. Can your Deca recipe be used with test decanoate as well?

You can use the test prop recipe with test dec. It will wwork better but decrease the BA content to no more than 1.9mls per total volume.