Need Help With Tren Ace Homebrew, Help Please And Thank You!

I want to know if I am doing this right and if there's anything I'm doing wrong or leaving out?

I'm planning to make 100ml of Trenbolone Ace at 100mg/ml

Items I'm Using:
10 Grams of tren Ace Powder
70ml of Cottonseed Oil
20ml Benzyl Benzoate (20% BB)
2ml Benzyl Alcohol (2% BA)
400ml Glass Beaker
Stirring Rod
100ml Vial
Whatman Sterile Syringe Filters 0.2um pore size
10ml Syringes
60ml Syringe
20 gauge needles
Scale

1. Take beaker and put it on weighing scale weigh out 10 grams of powder, take a syringe and add 20ml of BB and take another syringe and add 2ml BA to the beaker than add in cottonseed oil till it fills up to the 100ml line.

2. Place beaker on eye of stove on low-medium and take stirring rod till and stir until powder is dissolved and clear.

3. Put a 20 gauge needle in a 100ml vial stopper to relive pressure.

4. Take 60ML Syringe and draw 50ml of brew from beaker than replace needle with a new 20g needle and add whatman filter to syringe.

5. Put needle of syringe/filter/needle into vial. Press slowly on the plunger. Slow gentle pressure. The filter will fill with brew before dispensing through needle. Once you get your first drop, stop. Refill syringe to 50ml as you've probably "lost" a few ML to the filter.

6. Keep Filtering brew into vial. Once it's all in, load the syringe with the other 50ml and finish pushing all the brew into 100ml vial.

Is this Correct? Should I add the brew to ten different 10ml vials rather than just one 100ml vial? Thank you for you time.

I WILL BUMP THIS FOR YOU BRO AND FOR THE GUYS WHO KNOW HOW TO DO THIS STUFF! POWDERGUY IS ONE OF OUR NEW MEMBERS WHO KNOWS HIS STUFF IN THIS REGARD, SO HOPEFULLY HE OR SOMEONE ELSE WHO CAN HELP YA WILL CHIME IN SHORTLY!

AND WELCOME TO MC!

tren oxidizes with heat and degrades, I would mix powder , BA,BB separate. In another breaker heat up your oil to 165°-180°
then mix it with your hormone solution and filter. Do not directly heat up tren!
It should be a nice golden color if done right.

Also I would do 10ml or 20ml bottles. The rubber stopper will look like Swiss cheese in a 100ml bottle if you are only pulling 1ml at a time.

I agree withnot heating tren, it takes heat but it can start the degradation process. I also believe your BB and BA concentrations are needing correction as well as you will need multiple filters. Do place it in several vials maybe 20ml vials and not all in a 100ml.
I will get back to you when I have time today and get a formula I have that I did that will help guide you through this.

YOUR BB ONLY NEEDS TO BE 18%
YOUR BA1%
OIL I WOULD GO WITH GSO
MIX EVERYTHING TOGETHER SAVE 2-3 ML OF OIL SEP FROM EVERYTHING
AT THE END WHEN YOU ARE DONE TAKE THE LEFTOVER 2-3 ML OF OIL AND PUSH THREW FILTER THIS WAY YOU WILL GET ALL THE HORMONE OUT OF THE FILTER.
IF YOU DO 10-20 ML JUGS YOU WONT NEED TO FILTER IT AGAIN JUST USE YOU VENT PIN AND FILLING PIN AND FILLL.
WHENYOU FILTER EVERYTHING INTO ONE JUG MAKE SURE IT IS A CLEAN AND STERIL JUG
NEXT TIME GET A BREAK BLEADER AND USE A BOTTLE TOP FILTER YOUR FINGERS WILL THANK YOU!
SAVES TIME LOTS OF TIME AND MESS.
AND THEN MAIL ME ONE SO I CAN SEE IF YOU DID IT RITE!!
DO YOU KNOW HOW PURE YOUR POWDER IS ?
WHERE DID IT COME FROM IF YOU DONT MIND ME ASKING.
TREN IS ONE OF THE BEST AAS THEIR IS IN MY OPINION.

Only thing I would say not mentioned above is them beakers are not very accurate make sure you use your syringe to measure your oil. Tren does oxidise so the less messing the better.

I dont understand can u explain better?

who me...and which bit....??

Tren Ace recipes

Here brotha

Common 100mg/mL Recipe for 100mL

10 gram Trenbolone Acetate powder (7.5mL)
2mL BA (2%)
20mL BB (20%)
70.5mL Oil

Will also hold in:

10 gram Trenbolone Acetate powder (7.5mL)
2mL BA (2%)
15mL BB (15%)
75.5mL Oil

All depends on how thin you want your oil to be. Tren holds well with a low co-solvent (BB) concentration.

Common 100mg/mL Recipe for 100mL NO BB

10 gram Trenbolone Acetate powder (7.5mL)
5mL BA (5%)
87.5mL Oil


200mg/mL Recipe for 100mL EO, No Oil.

20 gram Trenbolone Acetate powder (15mL)
2mL BA (2%)
25mL BB (25%)
58mL EO
Caution-you will get tren cough with this one for sure.

I believe you can total you stuff by adding it together to see if your correct.
100ml
68-oil
10gr powder
2ml-BA
20ml-BB=100
I WOULD LIKE TO KNOW WHY TOURS COMES OUT TO 102
DONT TAKE THAT THAT WRONG WAY.
IS BECAUSE OF THE POWDER WEIGHT?
HOW DOES THAT WORK OUT.

Your not going to get 100% from your filters. You will lose 2%

DAM WENT BACK AND READ THAT NOW IT MAKES SENCE.
10G=7.5ML

Let me know how it works out boss. Also consider where you are at and the humidity of your region when making these things.

I be used this process personally and it came out flawless.
TREN ACE

Tren ace directions For tren ace, you will follow the directions in brew 101, the only differences will be temp of water in saucepan and how you add solvents.

**You will want to have your water no hotter than 185F in saucepan, when making tren ace. Let oil heat in glassware for 30 min(so it is brought to 185F, like the water it is sitting in... That way the prepared tren does not have to heat any longer than absolutely necessary)

**when adding solvents, bring BA content down to 1.5%,but do not add it straight to powder.... You will draw up BB, and in same syringe, draw the BA into the BB, then add the solution to the powder.... Working quickly, move glassware with powder and solvent into hot water bath, do not set it down though. Keep ahold of the glassware and swirl gently til it is dissolved(this will only take 10 - 60 seconds... Pull it out of heat the second it's dissolved, add 185 degree oil to your line you have marked on glassware and swirl....

***filter and bottle..

It's imperative you work quickly and pay attention, tren oxidizes easily from heat, especially when BA is present.... You can make tren ace in excess of 120mg/ml with only 1.5%BA/20%Bb(however, I recommend making it at 75-100mg because it will put you down and you won't be able to breathe if you cough off 120+mg tren ace! Trust me know that... Lol)

viciouscycle said:

I be used this process personally and it came out flawless.
TREN ACE

Tren ace directions For tren ace, you will follow the directions in brew 101, the only differences will be temp of water in saucepan and how you add solvents.

**You will want to have your water no hotter than 185F in saucepan, when making tren ace. Let oil heat in glassware for 30 min(so it is brought to 185F, like the water it is sitting in... That way the prepared tren does not have to heat any longer than absolutely necessary)

**when adding solvents, bring BA content down to 1.5%,but do not add it straight to powder.... You will draw up BB, and in same syringe, draw the BA into the BB, then add the solution to the powder.... Working quickly, move glassware with powder and solvent into hot water bath, do not set it down though. Keep ahold of the glassware and swirl gently til it is dissolved(this will only take 10 - 60 seconds... Pull it out of heat the second it's dissolved, add 185 degree oil to your line you have marked on glassware and swirl....

***filter and bottle..

It's imperative you work quickly and pay attention, tren oxidizes easily from heat, especially when BA is present.... You can make tren ace in excess of 120mg/ml with only 1.5%BA/20%Bb(however, I recommend making it at 75-100mg because it will put you down and you won't be able to breathe if you cough off 120+mg tren ace! Trust me know that... Lol)

Click to expand...

good post bro..

I agree with Vicious on this, tren degrades quickly, when your at the adding solvent part you can be pre heating your oil as you dissolve the powder in the solvent (BA & BB) This will help avoid the heating of tren for degradation and the possibility of adding moisture in your solution to keep any precipitation out of it. Then add your heated oil.

Does the pan for the water bath need to have sterile pan?

Powderguy said:

I agree withnot heating tren, it takes heat but it can start the degradation process. I also believe your BB and BA concentrations are needing correction as well as you will need multiple filters. Do place it in several vials maybe 20ml vials and not all in a 100ml.
I will get back to you when I have time today and get a formula I have that I did that will help guide you through this.

Click to expand...

Hello sir, how long approximately will it swirling it in the beaker for the the powder dissolve in the oil and solvents and the soultion is completely homogeneous and clear? 20-30mins?

- - - Updated - - -

charliebigspuds said:

who me...and which bit....??

Click to expand...

Hello sir, how long approximately will it swirling it in the beaker for the the powder dissolve in the oil and solvents and the soultion is completely homogeneous and clear? 20-30mins?

trenwarrior said:

Hello sir, how long approximately will it swirling it in the beaker for the the powder dissolve in the oil and solvents and the soultion is completely homogeneous and clear? 20-30mins?

- - - Updated - - -


Hello sir, how long approximately will it swirling it in the beaker for the the powder dissolve in the oil and solvents and the soultion is completely homogeneous and clear? 20-30mins?

Click to expand...

bump for Powder guy!

trenwarrior said:

Does the pan for the water bath need to have sterile pan?

Click to expand...

no mate the only thing that needs to be sterile is vail/neadle/filter. And the powder should desolve pretty quick just hold it up to eye lvl to check if u can see any bits still floating around.