1. #1
    MuscleChemistry Newbie Board Certified D.V.M.

    Join Date
    Sep 2015
    Posts
    29
    Rep Power
    0

    Default Test Prop powder conversion advice?

    I received 25g of test prop powder from LMC for free as a bonus to an existing order. I've made products out of longer lasting esters (i.e enanthates) but this will be my first venture into shorts. I've seen numerous Test Prop recipes online, each one slightly different than the last. I was going to brew a short run of 40 mls. The measurements are as follows:
    GSO: 28.60 mls
    Powder: 4 g
    BA: 0.8ml (2%)
    BB: 7.2 ml (18%)

    Will make 100mg/ml

    *Does this recipe look okay to you guys? I've seen some recipes as high as 5% on the BA but anyone I have spoken to said that would be much too high. Your thoughts? I personally have never gone above 2%.
    *ive seen other recipes include EO in the mix. What is the purpose behind utilizing EO? Is it essential?

    I i know that with short acting esters PIP is sort of the name of the game so I expect it. Ideally, I'd like to minimize it IF possible.

    thanks again guys
    Thanks LMC ROIDS thanked for this post
     

  2. #2
    MuscleChemistry Guru Board Certified CPH
    BEASTZ6's Avatar
    Join Date
    Jan 2009
    Posts
    1,750
    Rep Power
    2147485413

    Default

    You posted this in the wrong forum. Presser will probably move it over to the conversions forum.

    I use 20 gr of test prop powder to make 200 ml of product at 100 mg/ml. I use 2% ba and 20% bb. If you try to make 100 ml of test prop with 25 gr powder, you will fail miserably.

    You should be fine with brewing 200 ml with 25 gr of test prop powder. No need for you to use EO. Your finished product will be approximately 120 mg/ml (this is assuming that you have some very good raws), but it should not crash. Keep us posted on your results.
     

  3. #3
    MuscleChemistry Newbie Board Certified D.V.M.

    Join Date
    Sep 2015
    Posts
    29
    Rep Power
    0

    Default

    I noticed after I posted that I had created this thread in the wrong area. My apologies, Presser.I brewed a small batch this morning with the recipe I mentioned in the post and everything came out great. No crash. Haven't pinned the product yet.
     

  4. #4
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,686
    Rep Power
    2147525355

    Default

    Moved
    Test Prop powder conversion advice?

  5. #5
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,686
    Rep Power
    2147525355

    Default

    so did u ever pin it bro, if so how is it
    Test Prop powder conversion advice?

  6. #6
    Adam Levine
    MuscleChemistry Unregistered User

    Default

    GREAT, mabe i can have a try
     

  7. #7
    MuscleChemistry Newbie Residency Training

    Join Date
    Aug 2015
    Posts
    4
    Rep Power
    0

    Default

    I got some test prop from LMC too, here is my recipe:
    Powder: 5 grams
    Produces: 50 ml @ 100 mg/ml
    Requirements:
    · 5 grams test testosterone propionate
    · 36.25 ml sesame oil
    · Benzyl Alcohol 2.5 ml 5% BA
    · Benzyl Benzoate 7.5 ml 15% BB
     

  8. #8
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    Look at all these guys learning..I think those are decenet recipes..I personally use very little BB if I use any at all.

    MCDULL- sesame is a thick oil and I wouldn't use it for TP- go with a lighter carrier such as apricot, gso, mct, eo blend. Also lower your BA content, its to high, 2% will be effective and if you need more solvent you can add BB and warm oil mix to finish the solution.

    BARBELL- Have you pinned your solution? It looks fine, however like mentioned your ratios are off for 100mg/ml. Im sure it will be a litte uncomfortable as it looks like you have lots of BB in it..let us know.
     

  9. #9
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,686
    Rep Power
    2147525355

    Default

    Sesame oil, I've not heard of people using that in this forum or on other boards honestly, didn't even know it existed lol

    Now what I'm waiting for is some genius to use peanut oil to make an injectable steroid and then give to one of his buddies with a peanut allergy! GOD forbid
    Likes d12hazz liked this post
     
    Test Prop powder conversion advice?

  10. #10
    MuscleChemistry Registered Member Board Certified DMD
    Powderguy's Avatar
    Join Date
    Oct 2014
    Posts
    983
    Rep Power
    2147484640

    Default

    This actually happens..I read an article that a guy made an injectable with peanut oil, used it. He was sleeping with his girlfriend who, you guessed it, has a peanut (NUT) allergy and when he would sweat he would touch her with the oil emitted from his skin and glands and she became deathly ill from it.

    Almost killed her..I honestly don't remember the stuff he injected or why..the article was about how your skin is permissible and allows substances to pass through it.

    Yeah peanut or soy oil in an injectable..BIG NO NO..
     

  11. #11
    MuscleChemistry Registered Member Board Certified CPH
    Mrbigz's Avatar
    Join Date
    Feb 2008
    Location
    wonder i shall into the abyss
    Posts
    1,506
    Rep Power
    2147485170

    Default

    I have no clue where these guys get these recipes and how in the hell you guys walk around with knots all over your body.
    5% ba??
    I never ever use more than .5% and bb never have I use over 10%. In most only 4% is used.
    All these recipes using 20% and crap is just plan a waist of supplements and dealing with the pain is plan idiodic.

    - - - Updated - - -

    Prop should be made
    .5%ba
    9%bb
    The rest Oil
    That's it.
    Keep an eye on the heat and time heated
    Comments made by mrbigz are for entertainment only. Please respect rules and mrbigz. asking for sources. Results in the Dinga Ling .

  12. #12
    MuscleChemistry Vet Board Certified Psy.D
    thx's Avatar
    Join Date
    Jul 2015
    Posts
    387
    Rep Power
    2147484043

    Default

    2% BA is more than enough. Why are you guys using that much BA?
     

  13. #13

    Join Date
    Nov 2015
    Posts
    0
    Rep Power
    0

    Default

    Old thread I know but will test p be ok at 3% BA (or even 2%) and 15% BB if only using GSO?
     

Similar Threads

  1. Test Prop/Mast Prop Combo Conversion Problem
    By josey wales in forum Steroid Powder Recipe Discussion
    Replies: 12
    Last Post: 06-03-2014, 12:49 PM
  2. New guy with a question on my test prop powder
    By CaptainCook in forum Steroid Powder Recipe Discussion
    Replies: 5
    Last Post: 12-02-2013, 02:21 AM
  3. Test Powder conversion
    By warlord in forum Steroid Powder Recipe Discussion
    Replies: 4
    Last Post: 12-03-2011, 04:21 AM
  4. A few different Test Prop cycles - Advice
    By TheBomb in forum MuscleChemistry Discussion
    Replies: 9
    Last Post: 03-18-2003, 01:50 PM
  5. Advice with Test Prop
    By TheBomb in forum MuscleChemistry Discussion
    Replies: 11
    Last Post: 03-17-2003, 05:52 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in