Recommend: 0
Thread: Makin first batch of superhumanstrength magic in 3 days.. Got a few recipes.. Any suggestions??
-
10-18-2016, 12:33 AM #1
Makin first batch of superhumanstrength magic in 3 days.. Got a few recipes.. Any suggestions??
250 mg/ml - 100ml Cyp
25g raw
2ml BA
10ml BB
69.25ml Oil (GSO)
100 mg/ml - 100ml Tren A
10g raw
2ml BA
20ml BB or 15ml ??
70.5ml oil (GSO) or 75.5 with 15 BB
250 mg/ml - 100ml Sus
25g raw
2ml BA
20ml BB
59.25ml BA
Any suggestions guys?!
Sent from my iPhone using TapatalkCatfishlips, Landmark.Raine liked this post
-
10-18-2016, 06:34 AM #2
- Join Date
- May 2015
- Posts
- 89
- Rep Power
- 299
Imo for tren A keep the 20% BB. I had experiencies using less and it become less stable, just depending the normal temp of your country it can crash or not. If you leave in a cold country or temp goes down it will be suitable to crash so keep it at 20%. For the susta you can use 15% if you want and probably 10% will be also fine, but to be sure use 15%
Sent from my iPhone using TapatalkH8terproof thanked for this postH8terproof liked this post
-
10-18-2016, 01:16 PM #3
Thanks bro
Sent from my iPhone using TapatalkGiru, NafizAliKhan liked this post
-
10-18-2016, 03:37 PM #4
- Join Date
- Mar 2016
- Location
- TX
- Posts
- 115
- Rep Power
- 344
Your BB is your thinner and your BA is your preservative. Your percentages look high.
If you supersaturate in the solution and a little oil, heat and fully dissolve and then slowly add more oil and heat gently while stirring you can have a solution that will not crash.
Rule 1: Take your time and add little by little.
Rule 2: Do this process where the temperature is stable not 130 degrees in the pan and 60 degrees outside of it..the sudden temp change will cause separation.H8terproof, theBadguy thanked for this post
-
10-20-2016, 04:35 PM #5
-
10-20-2016, 05:29 PM #6
- Join Date
- Oct 2016
- Posts
- 19
- Rep Power
- 0
-
10-20-2016, 07:06 PM #7
- Join Date
- May 2015
- Posts
- 89
- Rep Power
- 299
12.5gr cyp; 1ml ba, 5-10ml BB(that will be between 10-20%), rest oil. I believe cyp@250mg no need more than 10% BB. For oil i will use Safflower/GSO or if you like a real almost cristal color, use MCT
Sent from my iPhone using TapatalkH8terproof thanked for this postH8terproof, Magyar86 liked this post
-
10-20-2016, 07:09 PM #8
-
10-20-2016, 07:12 PM #9
- Join Date
- Oct 2016
- Posts
- 19
- Rep Power
- 0
H8terproof thanked for this postH8terproof liked this post
-
10-20-2016, 07:18 PM #10
- Join Date
- Oct 2016
- Posts
- 19
- Rep Power
- 0
-
10-21-2016, 06:43 AM #11
-
10-21-2016, 01:42 PM #12
-
10-21-2016, 01:49 PM #13
I may post pics as i go through the process.. It's pretty straightforward.. But I know it's gonna get real soon as I start.. I've researched quite a bit and got input on recipes but I know I'm gonna learn a lot just 'by doing' also..
Sent from my iPhone using Tapatalkdrtbear1967 liked this post
-
10-21-2016, 06:07 PM #14
- Join Date
- Oct 2016
- Posts
- 19
- Rep Power
- 0
Put in powder in beaker add 2% ba so thats 2% of 50ml
Which is 1ml add bb of 10% to start off if it doesnt dissolve add a little heat wait to make sure it doesnt form crystals or "crash" if it does add 1 more ml of bb add heat etc then adding oil is easiest part just add it up to 50 ml on beaker filter and then bam your done
Sent from my SAMSUNG-SM-G891A using TapatalkH8terproof thanked for this postH8terproof liked this post
-
10-21-2016, 06:55 PM #15
Sent from my iPhone using Tapatalkbig_iron_up, theBadguy thanked for this post
-
10-21-2016, 06:55 PM #16
-
10-21-2016, 06:59 PM #17
- Join Date
- Oct 2016
- Posts
- 19
- Rep Power
- 0
H8terproof thanked for this post
-
10-21-2016, 07:01 PM #18
-
10-21-2016, 07:02 PM #19
- Join Date
- Oct 2016
- Posts
- 19
- Rep Power
- 0
-
10-21-2016, 07:03 PM #20
-
10-21-2016, 07:14 PM #21
- Join Date
- Mar 2016
- Location
- TX
- Posts
- 115
- Rep Power
- 344
Cyp, deca and test e are some of the easiest to do
start with no more than .9% ba and 5% bb
dissolve in a hot water bath before you add any oil
if your making the above.
your bb ratio is slightly high, it's not necessary since bb
is a solvent but also a thinner
your ba is your microbial preservative that prevents
bacteria from growing.H8terproof thanked for this postBEASTZ6 liked this post
-
10-21-2016, 07:17 PM #22
-
10-21-2016, 07:21 PM #23
- Join Date
- Mar 2016
- Location
- TX
- Posts
- 115
- Rep Power
- 344
If you made it with what you posted it may be slightly
uncomfortable. The excess bb will travel down the muscle
and you will have site soreness longer
and bb in excess can cause scar tissueH8terproof thanked for this postH8terproof liked this post
-
10-21-2016, 07:23 PM #24
-
10-21-2016, 07:27 PM #25
-
10-21-2016, 09:53 PM #26
- Join Date
- Oct 2016
- Posts
- 19
- Rep Power
- 0
H8terproof thanked for this post
-
10-22-2016, 12:28 AM #27
- Join Date
- Mar 2016
- Location
- TX
- Posts
- 115
- Rep Power
- 344
Mixed with 10% BB it will and the benzoate will cause an inflammatory response in the muscle fibers causing swelling and will cause site soreness.
A lot of companies now use very little BA and mostly BB, its a thinner and a solvent. They also have switched to apricot oil.
If you feel 20% bb in a 10ml vial will not cause site soreness be my guest.:-)Bigjim551 thanked for this post
-
10-22-2016, 08:25 AM #28
- Join Date
- May 2015
- Posts
- 89
- Rep Power
- 299
Amazing bro!! Well done!!! Now pin it and enjoy hehehhe
Sent from my iPhone using TapatalkH8terproof liked this post
-
10-22-2016, 10:15 AM #29
- Join Date
- May 2016
- Posts
- 248
- Rep Power
- 699
H8ter, looks good buddy. Make sure to let us know how pinning goes. Where did you get your base, Landmark Chem?
H8terproof liked this post
-
10-22-2016, 10:17 AM #30Landmark.Raine thanked for this postLandmark.Raine liked this post
-
10-22-2016, 10:19 AM #31
-
10-22-2016, 10:19 AM #32
-
10-22-2016, 10:20 AM #33
-
10-22-2016, 10:24 AM #34
- Join Date
- May 2016
- Posts
- 248
- Rep Power
- 699
-
10-22-2016, 10:25 AM #35
-
10-22-2016, 11:02 AM #36
-
10-22-2016, 11:04 AM #37
-
10-22-2016, 11:04 AM #38
-
10-22-2016, 11:05 AM #39
-
10-22-2016, 11:15 AM #40
-
10-22-2016, 11:16 AM #41
-
10-22-2016, 11:38 AM #42
- Join Date
- Oct 2016
- Posts
- 19
- Rep Power
- 0
-
10-22-2016, 12:05 PM #43
-
10-22-2016, 12:08 PM #44
- Join Date
- Oct 2016
- Posts
- 19
- Rep Power
- 0
-
10-22-2016, 12:28 PM #45
-
10-22-2016, 12:29 PM #46
-
10-22-2016, 12:30 PM #47
-
10-22-2016, 12:31 PM #48
-
10-22-2016, 12:47 PM #49
- Join Date
- Oct 2016
- Posts
- 19
- Rep Power
- 0
-
10-22-2016, 12:49 PM #50
- Join Date
- Oct 2016
- Posts
- 19
- Rep Power
- 0