Oral Anavar receipe
- Thread starter Tailor
- Start date
Muscle mechanic
MuscleChemistry Registered Member
Good luck anavar doesn't dissolve if it's pure. Not in pure everclear not in supersolution. Cap it!!!
Heart burn is fierce with what it takes for var.
If u try it smash and crush the sh8t out of it first. These crystals are not easy to dissolve.
Go with alcohol and a little olive oil and shake the crap out of it before each use.
If it is a solution and not suspension it's not pure!
Do 20 mg per ml with var.
Do per 1,gram add 50ml liquid
Sent from my SAMSUNG-SM-G890A using Tapatalk
Oxandrolone aka anavar powder made into an oral always will clog your dropper, you won’t even be able to get any into the glass dropper, its by far the worst powder I can think of to make into an oral solution, Ever clear and water doesn’t work, nor does pure ever clear, lol
Now you may be able to try using an oily type solution to make your oral anavar, or maybe try hitting its melting point and then mix with a thinner oil for an oil solution to used for oral usage.
But anavar just sucks when trying to make oral in solution. I would just cap it and call it a day
Now you may be able to try using an oily type solution to make your oral anavar, or maybe try hitting its melting point and then mix with a thinner oil for an oil solution to used for oral usage.
But anavar just sucks when trying to make oral in solution. I would just cap it and call it a day
I make Anavar suspension with 50mg/ML with great success and have been doing it for a couple of years now so have pretty much perfected the art of doing it. It tastes great this way too 
Take your correct amount of weighed Anavar powder to a pestle and mortar and pound it for a couple of minutes to break up the larger granules in to fine pieces. Next, measure out a correct amount of Maple syrup and alcohol, I use pear vodka but you can use whatever you want. Ration would be - for 10 ML Anavar solution/suspension, 500mg (1/2g) powder, 4.5 ML Maple Syrup and 5 ML vodka (or other alcohol of your choice). Put the powder in to the vial carefully and then inject the 4.5ML Maple syrup on to it. Put on the rubber cap - on the vial not your head and give it a good shake. This will merge the powder with the thicker fluid of maple syrup. Next, take off the cap and add the 5ML alcohol. Put the rubber seal back on, place the metal top and and crimp it. Then its just a matter of, each time you want to use it you just need to give the vial a vigorous shake and then draw the amount you want from the vial with a syringe and, remembering to take off the needle first of course, 'squirt' the solution on to your tongue.
I guarantee you that its the most pleasant and nicest tasting solution that you will have ever tried
NB: I use this method of crimping to keep the solution free from dust, etc but you can put in a larger vial and/or a bottle and just unscrew it if you prefer.
Hope this helps. Any questions, just ask.
Take your correct amount of weighed Anavar powder to a pestle and mortar and pound it for a couple of minutes to break up the larger granules in to fine pieces. Next, measure out a correct amount of Maple syrup and alcohol, I use pear vodka but you can use whatever you want. Ration would be - for 10 ML Anavar solution/suspension, 500mg (1/2g) powder, 4.5 ML Maple Syrup and 5 ML vodka (or other alcohol of your choice). Put the powder in to the vial carefully and then inject the 4.5ML Maple syrup on to it. Put on the rubber cap - on the vial not your head
and give it a good shake. This will merge the powder with the thicker fluid of maple syrup. Next, take off the cap and add the 5ML alcohol. Put the rubber seal back on, place the metal top and and crimp it. Then its just a matter of, each time you want to use it you just need to give the vial a vigorous shake and then draw the amount you want from the vial with a syringe and, remembering to take off the needle first of course, 'squirt' the solution on to your tongue.I guarantee you that its the most pleasant and nicest tasting solution that you will have ever tried
NB: I use this method of crimping to keep the solution free from dust, etc but you can put in a larger vial and/or a bottle and just unscrew it if you prefer.
Hope this helps. Any questions, just ask.
I make Anavar suspension with 50mg/ML with great success and have been doing it for a couple of years now so have pretty much perfected the art of doing it. It tastes great this way too
Take your correct amount of weighed Anavar powder to a pestle and mortar and pound it for a couple of minutes to break up the larger granules in to fine pieces. Next, measure out a correct amount of Maple syrup and alcohol, I use pear vodka but you can use whatever you want. Ration would be - for 10 ML Anavar solution/suspension, 500mg (1/2g) powder, 4.5 ML Maple Syrup and 5 ML vodka (or other alcohol of your choice). Put the powder in to the vial carefully and then inject the 4.5ML Maple syrup on to it. Put on the rubber cap - on the vial not your head
I guarantee you that its the most pleasant and nicest tasting solution that you will have ever tried
NB: I use this method of crimping to keep the solution free from dust, etc but you can put in a larger vial and/or a bottle and just unscrew it if you prefer.
Hope this helps. Any questions, just ask.
Really nice falcon, so let's say that your recipe is 50% alcohol ~ 50% maple syrup. I really wanna try it!
Sent from my iPhone using Tapatalk
Sure, give it a go, you certainly won't be disappointed in the taste, just don't be tempted to take another shot immediately after as it tastes so good
make sure also also to use some decent alcohol so that the taste stays good, don't need to use any of that 95% stuff that tastes bloody awful and gives you heartburn every time you take it!!
- - - Updated - - -
Sorry, just saw you replied to the other topic too re the promo acetate.
you can use the same recipe for that one too, I use it often both for myself and clients who don't want to take tablets.
Muscle mechanic
MuscleChemistry Registered Member
I used supersolution and everclear and yes u gotta grind smash it. I shook and used 3ml syringe and drew 2 ml which was 40ml.
There is Still a bunch of var at bottom
Will put photo later
Sent from my SAMSUNG-SM-G890A using Tapatalk
There is Still a bunch of var at bottom
Will put photo later
Sent from my SAMSUNG-SM-G890A using Tapatalk
Sure, give it a go, you certainly won't be disappointed in the taste, just don't be tempted to take another shot immediately after as it tastes so good
make sure also also to use some decent alcohol so that the taste stays good, don't need to use any of that 95% stuff that tastes bloody awful and gives you heartburn every time you take it!!
- - - Updated - - -
Sorry, just saw you replied to the other topic too re the promo acetate.
you can use the same recipe for that one too, I use it often both for myself and clients who don't want to take tablets.
Thank dude!! I use normally rum 151 as everclear in EU is not easy. You said you use vodka, which one?
Sent from my iPhone using Tapatalk
I used supersolution and everclear and yes u gotta grind smash it. I shook and used 3ml syringe and drew 2 ml which was 40ml.
There is Still a bunch of var at bottom
Will put photo later /QUOTE]
Not sure if your referring to what happend after you made the suspension using the method I describe above or in another way. if my method, you obviously did something out of step, probably put the vodka/alcohol in first or something. I've been using this method for the past 3, almost 4 years to make suspensions of orals as I have no tablet machine, nor do I really want on as I find taking it in a suspension is a far better way to ingest rather than in tablet form. I do this for myself and clients and not had any complaints so far from anyone in all the time I have been doing it.
What you need to make sure of is that you first put in the powder, next the syrup and then, after a vigorous shake, the alcohol. Reason for this is that the powder adheres somewhat to the syrup and then, when you put the alcohol in, its still 'encased' within the confines of the syrup.
Try it this way and I am positive that you will benefit from it.
Cheers
Thank dude!! I use normally rum 151 as everclear in EU is not easy. You said you use vodka, which one? /QUOTE]
Everclear is available in EU but difficult to find, but then, why you'd want to find it I really don't know as it tastes bloody awful. Same as Rum 151, too strong for me and probably the same raw alcohol taste being as it's 151 proof!!
I like to use Absolute vodka @ 40% is ideal and, if you use the flavored versions of it (I use pear), it tastes great. Hope that helps. Let me know how you get on
Thank dude!! I use normally rum 151 as everclear in EU is not easy. You said you use vodka, which one? /QUOTE]
Everclear is available in EU but difficult to find, but then, why you'd want to find it I really don't know as it tastes bloody awful. Same as Rum 151, too strong for me and probably the same raw alcohol taste being as it's 151 proof!!
I like to use Absolute vodka @ 40% is ideal and, if you use the flavored versions of it (I use pear), it tastes great. Hope that helps. Let me know how you get on
Thanks for you answer bro, no wayyyyy. Really you use just absolute vodka?everywhere i read people recommend everclear or proof 151, i never ever imagine it can work with just absolute vodka ejejje. I am gonna try your recipe this weekend and i will let you know. But now that i think, it makes senses as you recipe is 50-50. I do normally 50% glycerine and 50% alcohol and it taste well.
What i said, i am gonna try it this weekend. Thanks man!
Sent from my iPhone using Tapatalk
Muscle mechanic
MuscleChemistry Registered Member
Pure var will not dissolve in anything it's molecular weight is too heavy.I used supersolution and everclear and yes u gotta grind smash it. I shook and used 3ml syringe and drew 2 ml which was 40ml.
There is Still a bunch of var at bottom
Will put photo later /QUOTE]
Not sure if your referring to what happend after you made the suspension using the method I describe above or in another way. if my method, you obviously did something out of step, probably put the vodka/alcohol in first or something. I've been using this method for the past 3, almost 4 years to make suspensions of orals as I have no tablet machine, nor do I really want on as I find taking it in a suspension is a far better way to ingest rather than in tablet form. I do this for myself and clients and not had any complaints so far from anyone in all the time I have been doing it.
What you need to make sure of is that you first put in the powder, next the syrup and then, after a vigorous shake, the alcohol. Reason for this is that the powder adheres somewhat to the syrup and then, when you put the alcohol in, its still 'encased' within the confines of the syrup.
Try it this way and I am positive that you will benefit from it.
Cheers
Oh i used it but dosing off when I end up with alot on Bottom after finished with liquid
I used a oral super solution.
It's too easy to get bulk tabs or cap. I am not gonna bother, I get var cheap.
Real cheap. People I know want tabs and not caps and won't bother with oral bad or any other roid.
It's just too easy to get with right resources
Sent from my SAMSUNG-SM-G890A using Tapatalk
Similar threads
Purity Source labs
Just in NEW HPLC test results EP Euro-Pharmacies Anavar