1. #1
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default Steroid conversions

    Several years ago, I learned how to convert pellets into injectible tren because my boyfriend (bless him) was useless with this kind of thing. I'd much rather he (and all of you) get the proper knowledge and a safe product than to buy from a UG that is probably converting in the bathroom sink. Once I found out how to get my hands on powders, I realized how easy and cost effective it is to convert them.*

    All the items needed to convert powders to injectable are easily procured online. Remember that you don't have to buy your supplies from a company that caters to bodybuilders. (these companies are usually more expensive because they know what you're using their stuff for.)*

    They have have bulk and retail pricing and are reliable. Remember that you can also buy from chemical supply houses, medical, and science supply online. Do a Google search for "science supplies" and you'll be surprised at what you can find for a very reasonable price.

    Chemicals you'll need for almost every conversion:

    BB: Benzyl benzoate
    BA: Benzyl alcohol (make sure that you do not exceed 5% BA for any of the conversions)

    For Liquid Orals:
    PEG 300: Polyethylene Glycol

    Oils:
    Sesame oil is good, and so is grape see oil. Stay away from the thicker oils, and make sure you don't have an alergy to the oil you're using (walnut, for example).

    Supplies:
    Some companies sell sterile vials with the stopper and crimper already on them. This is good if you have only a small amount to make or only convert every once in a while. Remember to use a venting needle with these when adding your final conversion to them. (transfer air out while putting the product in.)


    Syringes 3cc & 5/10cc or bigger
    18 or 20 gauge needles to vent and to transfer
    Vials/beakers/glass measuring cups for mixing - heat proof
    Sterile Vials or vials/stoppers/crimper for your product
    sterile filters - whatman or equivelent
    plastic or glass mixing spoons/swizzles. No metal
    shallow pan to sterilize vials and to heat up mixtures

    Test Enanthate

    Powder: 5 grams
    Produces: 20 ml @ 250 mg/ml

    Requirements:*
    5 grams testosterone enanthate15.25 ml sesame oilBenzyl Alcohol 1ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Test Enanthate

    Powder: 10 grams
    Produces: 40 ml @ 250 mg/ml

    Requirements:*
    10 grams testosterone enanthateBenzyl Alcohol 2ml 5% BA30.5 ml sesame oilSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Test Cypionate

    Powder: 5 grams
    Produces: 20 ml @ 250 mg/ml

    Requirements:*
    5 grams testosterone cypionate15.25 ml sesame oilBenzyl Alcohol 1 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Test Cypionate

    Powder: 10 grams
    Produces: 40 ml @ 250 mg/ml

    Requirements:*
    10 grams testosterone cypionate30.5 ml sesame oilBenzyl Alcohol 2 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Equipoise - boldenone undecylenate -*

    Note: Equipoise - boldenone undecylenate - is liquid at room temperature so use the following conversion: 1 ml of EQ = 1.18 grams

    Powder: 5 grams
    Produces: 25 ml @ 200 mg/ml

    Requirements:*
    5 grams Equipoise - boldenone undecylenate -20.50 ml sesame oilBenzyl Alcohol 0.75 ml 3% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Equipoise - boldenone undecylenate -*

    Note: Equipoise - boldenone undecylenate - is liquid at room temperature so use the following conversion: 1 ml of EQ = 1.18 grams

    Powder: 10 grams
    Produces: 50 ml @ 200 mg/ml

    Requirements:*
    10 grams Equipoise - boldenone undecylenate -41 ml sesame oilBenzyl Alcohol 1.5 ml 3% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Note:*If you have more than the equivalent of 10 grams of Equipoise - boldenone undecylenate - , it is recommended that you do the conversion all at the same time to avoid having to measure and calculate 5 or 10 gram equivalents each time.


    Test testosterone propionate

    Powder: 5 grams
    Produces: 50 ml @ 100 mg/ml

    Requirements:*
    5 grams test testosterone propionate36.25 ml sesame oilBenzyl Alcohol 2.5 ml 5% BABenzyl Benzoate 7.5 ml 15% BBSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialadd BB to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Test testosterone propionate

    Powder: 10 grams
    Produces: 100 ml @ 100 mg/ml

    Requirements:*
    10 grams test testosterone propionate72.5 ml sesame oilBenzyl Alcohol 5 ml 5% BABenzyl Benzoate 15 ml 15% BBSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialadd BB to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Deca-Durabolin - nandrolone decanoate -*

    Powder: 5 grams
    Produces: 25 ml @ 200 mg/ml

    Requirements:*
    5 grams Deca-Durabolin - nandrolone decanoate - - powder18.75 ml sesame oilBenzyl Alcohol 1.25 ml 5% BABenzyl Benzoate 1.25 ml 5% BBSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialadd BB to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Deca-Durabolin - nandrolone decanoate -*

    Powder: 10 grams
    Produces: 50 ml @ 200 mg/ml

    Requirements:*
    10 grams Deca-Durabolin - nandrolone decanoate - - powder37.5 ml sesame oilBenzyl Alcohol 2.5 ml 5% BABenzyl Benzoate 2.5 ml 5% BBSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialadd BB to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.trenbolone

    Note: this conversion is not for the pellet form

    Powder: 5 grams
    Produces: 50 ml @ 100 mg/ml

    Requirements:*
    5 grams trenbolone43.75 ml sesame oilBenzyl Alcohol 2.5 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.trenbolone

    Note: this conversion is not for the pellet form

    Powder: 10 grams
    Produces: 100 ml @ 100 mg/ml

    Requirements:*
    10 grams trenbolone87.5 ml sesame oilBenzyl Alcohol 5 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2ml of oil (saved previously) and run it through the Whatman filter into the solution.Winstrol

    Note: there is a tendency to ruin the product during conversion so only use one gram at a time

    Powder: 1 gram
    Produces: 20 ml at 50 mg/ml

    Requirements:*
    1 gram of winstrolone 20 ml glass vial or largerone 20 ml sterile glass vial or largerone 0.45 Whatman sterile syringe filtertwo 5 or 10 ml syringestwo 3 ml syringesthree 18 or 20 gauge pinstwo 22 gauge pins17 ml of sesame seed oil0.2 ml of benzyl alcohol2 ml of Mr.T super solventProcedure:*
    measure one gram of powderdraw out 2 ml of the Mr. T super solvent using one of the 3 ml syringesplace the measured powder in the open vial and add the solventplace the rubber stopper back on the vial and put one of the 20 gauge pins in the stopperplace the vial in a small pan and place the pan on the eye of the stoveheat until the powder dissolves into a liquid (usually around 239.8-242 degrees F)turn off the heat and let it cool down in the pan to room temperature (approx. 15 minutes)heat the oil in a suitable container in the oven until it reaches a minimum of 212 degrees F to sterilise it (it will be necessary to use slightly more oil than is required as all of it will not be able to be utilised)draw out 0.2 ml of benzyl alcohol (this will account for 1% of the solution so make sure the measurement is correct)add the benzyl alcohol to the solution in the vial and shake very gentlydraw out the oil with the 10 ml syringe (make sure the oil has cooled down somewhat before doing this)add 15 ml of the oil (saving 2 ml for later) to the solution in the vial and shake very gently Note: If the winstrol begins to clump back up, reheat the solution (place in a pan, put the pan on the eye of the stove and heat until it liquefies again) and allow it to cool down slowlyplace one of the 18 gauge pins in the sterile, unopened vial and attach the Whatman sterile filterdraw out the solution using the other 10 ml syringe, attach to the filter, and slowly press the solution out into the sterile vialuse the previously saved 2 ml of oil in the other syringe and run it through the filter to ensure that all the Winstrol passes throughafter the filtering process, leave the pin in the sterile vial and remove the filterplace the vial in a pan and place the pan on the eye of the stoveheat for 15-20 minutes, remove from heat, and let it cool down to room temperature (approx. 15 minutes)The finished solution will be light-gold in colour.
    Ensure that you follow the guidelines carefully for this conversion.

    For conversions larger than one gram, refer to the powder conversion calculator at the top of this page.


    -------------------------------------------------------


    POWDER TO LIQUID ORAL CONVERSIONS:


    Anadrol
    Powder: per 1 gram of Oxymetholone*
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Oxymetholone powder1 beaker suitable for holding the volume of liquids8.4 ml of PEG 30010.5 ml 190 Proof Grain AlcoholAnavar
    Powder: per 1 gram of Oxandrolone
    Produces: Highest concentration made - 20 mg/ml

    Requirements:*
    1 gram of Oxandrolone powder1 beaker suitable for holding the volume of liquids9.8 ml of PEG 30039.2 ml of 190 Proof Grain AlcoholArmidex
    Powder: per 1 gram of Anastrozole
    Produces: Highest concentration made - 5 mg/ml

    Requirements:*
    1 gram of Anastrozole powder1 beaker suitable for holding the volume of liquids19.9 ml of PEG 300179.1 ml of 190 Proof Grain AlcoholClomid
    Powder: per 1 gram of Clomiphene Citrate
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Clomiphene Citrate1 beaker suitable for holding the volume of liquids7.6 ml of Glycerol11.3 ml of 190 Proof Grain AlcoholClomid
    Powder: per 1 gram of Clomiphene Citrate
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Clomiphene Citrate1 beaker suitable for holding the volume of liquids8.4 ml of PEG 60010.5 ml of 190 Proof Grain AlcoholDianabol
    Powder: per 1 gram of Methandrostenolone
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Methandrostenolone powder1 beaker suitable for holding the volume of liquids19 ml of 190 Proof Grain AlcoholFemara
    Powder: per 1 gram of Letrozole
    Produces: Highest concentration made - 5 mg/ml

    Requirements:*
    1 gram of Letrozole powder1 beaker suitable for holding the volume of liquids19.9 ml of PEG 300179.1 ml of 190 Proof Grain AlcoholNolvadex
    Powder: per 1 gram of Tamoxifen Citrate
    Produces: Highest concentration made - 20 mg/ml

    Requirements:*
    1 gram of Tamoxifen Citrate1 beaker suitable for holding the volume of liquids19.6 ml of Glycerol29.4 ml of 190 Proof Grain AlcoholNolvadex
    Powder: per 1 gram of Tamoxifen Citrate
    Produces: Highest concentration made - 20 mg/ml

    Requirements:*
    1 gram of Tamoxifen Citrate1 beaker suitable for holding the volume of liquids9.8 ml of PEG 60039.2 ml of 190 Proof Grain AlcoholProviron
    Powder: per 1 gram of Mesterolone*
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Mesterolone1 beaker suitable for holding the volume of liquids8.4 ml of PEG 30010.5 ml of 190 Proof Grain AlcoholWinstrol
    Powder: per 1 gram of Stanozolol
    Produces: Highest concentration made - 25 mg/ml

    Requirements:*
    1 gram of Stanozolol1 beaker suitable for holding the volume of liquids7.8 ml of PEG 30031.2 ml of 190 Proof Grain AlcoholFor all of the above conversions requiring PEG and 190 Proof Alcohol, use the following procedure:*
    place a sufficient amount of water in a pan and place on the stoveremove from heat when the water reaches boiling temperatureplace the powder and the PEG in the beakerimmerse the beaker in the pan of water so that the water is level with the top of the contents of the beakergently swirl or stir the contents of the beaker until the solution is clear (reheat the water if necessary)remove the beaker from the waterallow the PEG to cool downslowly add the 190 Proof Alcohol to the mixturegently stir until fully mixedFor all of the above conversions where PEG is not required, use the following procedure:*
    mix powder and 190 Proof Alcohol in the beakergently swirl or stir the contents of the beaker until the solution is clearthe majority of powders which do not require PEG will dissolve readily but for those that are troublesome, refer to the heating procedure as outlined aboveIn the event that 190 Proof Grain Alcohol (EverClear) is unavailable, then substitute Bacardi 151.

    Flavoured oils can also be added to mask the taste if that is your preference.




    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Likes blacktail liked this post
     
    Just a grateful member!!

  2. #2
    MuscleChemistry Vet Board Certified Psy.D
    thx's Avatar
    Join Date
    Jul 2015
    Posts
    387
    Rep Power
    2147484043

    Default

    Bro where did you get this from?

    1 gram of Mesterolone1 beaker suitable for holding the volume of liquids8.4 ml of PEG 30010.5 ml of 190 Proof Grain AlcoholWinstrol

    That's 30L of alcohol.
    Sink, suffer, self-destruct. Rise stronger, reconstruct

  3. #3
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by thx View Post
    Bro where did you get this from?

    1 gram of Mesterolone1 beaker suitable for holding the volume of liquids8.4 ml of PEG 30010.5 ml of 190 Proof Grain AlcoholWinstrol

    That's 30L of alcohol.
    An old post.
    Don't quite remember..
    Let's see who they for

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Likes yasar liked this post
     
    Just a grateful member!!

  4. #4
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by thx View Post
    Bro where did you get this from?

    1 gram of Mesterolone1 beaker suitable for holding the volume of liquids8.4 ml of PEG 30010.5 ml of 190 Proof Grain AlcoholWinstrol

    That's 30L of alcohol.
    Don't see 30L of Alcohol though bro.
    I always used 40ml per 25mg dose of pure 190
    Above days 10.5 ml with 8.5ml peg300




    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  5. #5
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Those are Kian Phillips recipes!!
    Quote Originally Posted by thx View Post
    Bro where did you get this from?

    1 gram of Mesterolone1 beaker suitable for holding the volume of liquids8.4 ml of PEG 30010.5 ml of 190 Proof Grain AlcoholWinstrol

    That's 30L of alcohol.
    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  6. #6
    MuscleChemistry Guru Board Certified CPH
    blacktail's Avatar
    Join Date
    Sep 2002
    Posts
    1,043
    Rep Power
    2147484712

    Default

    Always wanted to make my own but was worried more about buying power than made gear.
    Likes Presser liked this post
     
    Blacktail

    ______________________________

    blacktail is presenting fictitious opinions and does in no way, shape or form encourage, use nor condone the use of any illegal substances or the use of legal substances in an illegal manner.
    The information discussed is strictly entertainment

  7. #7
    MuscleChemistry Newbie Board Certified D.V.M.

    Join Date
    Sep 2018
    Posts
    44
    Rep Power
    0

    Default

    Quote Originally Posted by Muscle mechanic View Post
    Several years ago, I learned how to convert pellets into injectible tren because my boyfriend (bless him) was useless with this kind of thing. I'd much rather he (and all of you) get the proper knowledge and a safe product than to buy from a UG that is probably converting in the bathroom sink. Once I found out how to get my hands on powders, I realized how easy and cost effective it is to convert them.*

    All the items needed to convert powders to injectable are easily procured online. Remember that you don't have to buy your supplies from a company that caters to bodybuilders. (these companies are usually more expensive because they know what you're using their stuff for.)*

    They have have bulk and retail pricing and are reliable. Remember that you can also buy from chemical supply houses, medical, and science supply online. Do a Google search for "science supplies" and you'll be surprised at what you can find for a very reasonable price.

    Chemicals you'll need for almost every conversion:

    BB: Benzyl benzoate
    BA: Benzyl alcohol (make sure that you do not exceed 5% BA for any of the conversions)

    For Liquid Orals:
    PEG 300: Polyethylene Glycol

    Oils:
    Sesame oil is good, and so is grape see oil. Stay away from the thicker oils, and make sure you don't have an alergy to the oil you're using (walnut, for example).

    Supplies:
    Some companies sell sterile vials with the stopper and crimper already on them. This is good if you have only a small amount to make or only convert every once in a while. Remember to use a venting needle with these when adding your final conversion to them. (transfer air out while putting the product in.)


    Syringes 3cc & 5/10cc or bigger
    18 or 20 gauge needles to vent and to transfer
    Vials/beakers/glass measuring cups for mixing - heat proof
    Sterile Vials or vials/stoppers/crimper for your product
    sterile filters - whatman or equivelent
    plastic or glass mixing spoons/swizzles. No metal
    shallow pan to sterilize vials and to heat up mixtures

    Test Enanthate

    Powder: 5 grams
    Produces: 20 ml @ 250 mg/ml

    Requirements:*
    5 grams testosterone enanthate15.25 ml sesame oilBenzyl Alcohol 1ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Test Enanthate

    Powder: 10 grams
    Produces: 40 ml @ 250 mg/ml

    Requirements:*
    10 grams testosterone enanthateBenzyl Alcohol 2ml 5% BA30.5 ml sesame oilSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Test Cypionate

    Powder: 5 grams
    Produces: 20 ml @ 250 mg/ml

    Requirements:*
    5 grams testosterone cypionate15.25 ml sesame oilBenzyl Alcohol 1 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Test Cypionate

    Powder: 10 grams
    Produces: 40 ml @ 250 mg/ml

    Requirements:*
    10 grams testosterone cypionate30.5 ml sesame oilBenzyl Alcohol 2 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Equipoise - boldenone undecylenate -*

    Note: Equipoise - boldenone undecylenate - is liquid at room temperature so use the following conversion: 1 ml of EQ = 1.18 grams

    Powder: 5 grams
    Produces: 25 ml @ 200 mg/ml

    Requirements:*
    5 grams Equipoise - boldenone undecylenate -20.50 ml sesame oilBenzyl Alcohol 0.75 ml 3% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Equipoise - boldenone undecylenate -*

    Note: Equipoise - boldenone undecylenate - is liquid at room temperature so use the following conversion: 1 ml of EQ = 1.18 grams

    Powder: 10 grams
    Produces: 50 ml @ 200 mg/ml

    Requirements:*
    10 grams Equipoise - boldenone undecylenate -41 ml sesame oilBenzyl Alcohol 1.5 ml 3% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Note:*If you have more than the equivalent of 10 grams of Equipoise - boldenone undecylenate - , it is recommended that you do the conversion all at the same time to avoid having to measure and calculate 5 or 10 gram equivalents each time.


    Test testosterone propionate

    Powder: 5 grams
    Produces: 50 ml @ 100 mg/ml

    Requirements:*
    5 grams test testosterone propionate36.25 ml sesame oilBenzyl Alcohol 2.5 ml 5% BABenzyl Benzoate 7.5 ml 15% BBSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialadd BB to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Test testosterone propionate

    Powder: 10 grams
    Produces: 100 ml @ 100 mg/ml

    Requirements:*
    10 grams test testosterone propionate72.5 ml sesame oilBenzyl Alcohol 5 ml 5% BABenzyl Benzoate 15 ml 15% BBSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialadd BB to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Deca-Durabolin - nandrolone decanoate -*

    Powder: 5 grams
    Produces: 25 ml @ 200 mg/ml

    Requirements:*
    5 grams Deca-Durabolin - nandrolone decanoate - - powder18.75 ml sesame oilBenzyl Alcohol 1.25 ml 5% BABenzyl Benzoate 1.25 ml 5% BBSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialadd BB to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Deca-Durabolin - nandrolone decanoate -*

    Powder: 10 grams
    Produces: 50 ml @ 200 mg/ml

    Requirements:*
    10 grams Deca-Durabolin - nandrolone decanoate - - powder37.5 ml sesame oilBenzyl Alcohol 2.5 ml 5% BABenzyl Benzoate 2.5 ml 5% BBSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialadd BB to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.trenbolone

    Note: this conversion is not for the pellet form

    Powder: 5 grams
    Produces: 50 ml @ 100 mg/ml

    Requirements:*
    5 grams trenbolone43.75 ml sesame oilBenzyl Alcohol 2.5 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.trenbolone

    Note: this conversion is not for the pellet form

    Powder: 10 grams
    Produces: 100 ml @ 100 mg/ml

    Requirements:*
    10 grams trenbolone87.5 ml sesame oilBenzyl Alcohol 5 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2ml of oil (saved previously) and run it through the Whatman filter into the solution.Winstrol

    Note: there is a tendency to ruin the product during conversion so only use one gram at a time

    Powder: 1 gram
    Produces: 20 ml at 50 mg/ml

    Requirements:*
    1 gram of winstrolone 20 ml glass vial or largerone 20 ml sterile glass vial or largerone 0.45 Whatman sterile syringe filtertwo 5 or 10 ml syringestwo 3 ml syringesthree 18 or 20 gauge pinstwo 22 gauge pins17 ml of sesame seed oil0.2 ml of benzyl alcohol2 ml of Mr.T super solventProcedure:*
    measure one gram of powderdraw out 2 ml of the Mr. T super solvent using one of the 3 ml syringesplace the measured powder in the open vial and add the solventplace the rubber stopper back on the vial and put one of the 20 gauge pins in the stopperplace the vial in a small pan and place the pan on the eye of the stoveheat until the powder dissolves into a liquid (usually around 239.8-242 degrees F)turn off the heat and let it cool down in the pan to room temperature (approx. 15 minutes)heat the oil in a suitable container in the oven until it reaches a minimum of 212 degrees F to sterilise it (it will be necessary to use slightly more oil than is required as all of it will not be able to be utilised)draw out 0.2 ml of benzyl alcohol (this will account for 1% of the solution so make sure the measurement is correct)add the benzyl alcohol to the solution in the vial and shake very gentlydraw out the oil with the 10 ml syringe (make sure the oil has cooled down somewhat before doing this)add 15 ml of the oil (saving 2 ml for later) to the solution in the vial and shake very gently Note: If the winstrol begins to clump back up, reheat the solution (place in a pan, put the pan on the eye of the stove and heat until it liquefies again) and allow it to cool down slowlyplace one of the 18 gauge pins in the sterile, unopened vial and attach the Whatman sterile filterdraw out the solution using the other 10 ml syringe, attach to the filter, and slowly press the solution out into the sterile vialuse the previously saved 2 ml of oil in the other syringe and run it through the filter to ensure that all the Winstrol passes throughafter the filtering process, leave the pin in the sterile vial and remove the filterplace the vial in a pan and place the pan on the eye of the stoveheat for 15-20 minutes, remove from heat, and let it cool down to room temperature (approx. 15 minutes)The finished solution will be light-gold in colour.
    Ensure that you follow the guidelines carefully for this conversion.

    For conversions larger than one gram, refer to the powder conversion calculator at the top of this page.


    -------------------------------------------------------


    POWDER TO LIQUID ORAL CONVERSIONS:


    Anadrol
    Powder: per 1 gram of Oxymetholone*
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Oxymetholone powder1 beaker suitable for holding the volume of liquids8.4 ml of PEG 30010.5 ml 190 Proof Grain AlcoholAnavar
    Powder: per 1 gram of Oxandrolone
    Produces: Highest concentration made - 20 mg/ml

    Requirements:*
    1 gram of Oxandrolone powder1 beaker suitable for holding the volume of liquids9.8 ml of PEG 30039.2 ml of 190 Proof Grain AlcoholArmidex
    Powder: per 1 gram of Anastrozole
    Produces: Highest concentration made - 5 mg/ml

    Requirements:*
    1 gram of Anastrozole powder1 beaker suitable for holding the volume of liquids19.9 ml of PEG 300179.1 ml of 190 Proof Grain AlcoholClomid
    Powder: per 1 gram of Clomiphene Citrate
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Clomiphene Citrate1 beaker suitable for holding the volume of liquids7.6 ml of Glycerol11.3 ml of 190 Proof Grain AlcoholClomid
    Powder: per 1 gram of Clomiphene Citrate
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Clomiphene Citrate1 beaker suitable for holding the volume of liquids8.4 ml of PEG 60010.5 ml of 190 Proof Grain AlcoholDianabol
    Powder: per 1 gram of Methandrostenolone
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Methandrostenolone powder1 beaker suitable for holding the volume of liquids19 ml of 190 Proof Grain AlcoholFemara
    Powder: per 1 gram of Letrozole
    Produces: Highest concentration made - 5 mg/ml

    Requirements:*
    1 gram of Letrozole powder1 beaker suitable for holding the volume of liquids19.9 ml of PEG 300179.1 ml of 190 Proof Grain AlcoholNolvadex
    Powder: per 1 gram of Tamoxifen Citrate
    Produces: Highest concentration made - 20 mg/ml

    Requirements:*
    1 gram of Tamoxifen Citrate1 beaker suitable for holding the volume of liquids19.6 ml of Glycerol29.4 ml of 190 Proof Grain AlcoholNolvadex
    Powder: per 1 gram of Tamoxifen Citrate
    Produces: Highest concentration made - 20 mg/ml

    Requirements:*
    1 gram of Tamoxifen Citrate1 beaker suitable for holding the volume of liquids9.8 ml of PEG 60039.2 ml of 190 Proof Grain AlcoholProviron
    Powder: per 1 gram of Mesterolone*
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Mesterolone1 beaker suitable for holding the volume of liquids8.4 ml of PEG 30010.5 ml of 190 Proof Grain AlcoholWinstrol
    Powder: per 1 gram of Stanozolol
    Produces: Highest concentration made - 25 mg/ml

    Requirements:*
    1 gram of Stanozolol1 beaker suitable for holding the volume of liquids7.8 ml of PEG 30031.2 ml of 190 Proof Grain AlcoholFor all of the above conversions requiring PEG and 190 Proof Alcohol, use the following procedure:*
    place a sufficient amount of water in a pan and place on the stoveremove from heat when the water reaches boiling temperatureplace the powder and the PEG in the beakerimmerse the beaker in the pan of water so that the water is level with the top of the contents of the beakergently swirl or stir the contents of the beaker until the solution is clear (reheat the water if necessary)remove the beaker from the waterallow the PEG to cool downslowly add the 190 Proof Alcohol to the mixturegently stir until fully mixedFor all of the above conversions where PEG is not required, use the following procedure:*
    mix powder and 190 Proof Alcohol in the beakergently swirl or stir the contents of the beaker until the solution is clearthe majority of powders which do not require PEG will dissolve readily but for those that are troublesome, refer to the heating procedure as outlined aboveIn the event that 190 Proof Grain Alcohol (EverClear) is unavailable, then substitute Bacardi 151.

    Flavoured oils can also be added to mask the taste if that is your preference.




    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Nice info...

    Sent from my vivo 1601 using Tapatalk
     

  8. #8
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    [QUOTE=blacktail;812607]Always wanted to make my own but was worried more about buying power than made gear.[/QUOTE

    How much is problem or not!!
    10-20 grams no problem especially when it's dry milk...
    U would be amazed....
    AND small amounts or never searched and if opened surely not tested if its not what it says ...
    On it..... test that small amount. Lol!! If they open they will see vials or dry milk .....
    But imagine a busted leaky .... may be inspected to find ....

    They watch weights and frequency of .....
    AND xray picks up bottle....
    What ever it says it is.... u can say u can't help if u got something labeled as .... but instead its....
    Last edited by Muscle mechanic; 09-24-2018 at 01:15 AM.
    Likes blacktail liked this post
     
    Just a grateful member!!

  9. #9
    MuscleChemistry Registered Member Board Certified DMD
    Macho313's Avatar
    Join Date
    Oct 2015
    Posts
    527
    Rep Power
    2147484183

    Default

    Quote Originally Posted by Muscle mechanic View Post
    Several years ago, I learned how to convert pellets into injectible tren because my boyfriend (bless him) was useless with this kind of thing. I'd much rather he (and all of you) get the proper knowledge and a safe product than to buy from a UG that is probably converting in the bathroom sink. Once I found out how to get my hands on powders, I realized how easy and cost effective it is to convert them.*

    All the items needed to convert powders to injectable are easily procured online. Remember that you don't have to buy your supplies from a company that caters to bodybuilders. (these companies are usually more expensive because they know what you're using their stuff for.)*

    They have have bulk and retail pricing and are reliable. Remember that you can also buy from chemical supply houses, medical, and science supply online. Do a Google search for "science supplies" and you'll be surprised at what you can find for a very reasonable price.

    Chemicals you'll need for almost every conversion:

    BB: Benzyl benzoate
    BA: Benzyl alcohol (make sure that you do not exceed 5% BA for any of the conversions)

    For Liquid Orals:
    PEG 300: Polyethylene Glycol

    Oils:
    Sesame oil is good, and so is grape see oil. Stay away from the thicker oils, and make sure you don't have an alergy to the oil you're using (walnut, for example).

    Supplies:
    Some companies sell sterile vials with the stopper and crimper already on them. This is good if you have only a small amount to make or only convert every once in a while. Remember to use a venting needle with these when adding your final conversion to them. (transfer air out while putting the product in.)


    Syringes 3cc & 5/10cc or bigger
    18 or 20 gauge needles to vent and to transfer
    Vials/beakers/glass measuring cups for mixing - heat proof
    Sterile Vials or vials/stoppers/crimper for your product
    sterile filters - whatman or equivelent
    plastic or glass mixing spoons/swizzles. No metal
    shallow pan to sterilize vials and to heat up mixtures

    Test Enanthate

    Powder: 5 grams
    Produces: 20 ml @ 250 mg/ml

    Requirements:*
    5 grams testosterone enanthate15.25 ml sesame oilBenzyl Alcohol 1ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Test Enanthate

    Powder: 10 grams
    Produces: 40 ml @ 250 mg/ml

    Requirements:*
    10 grams testosterone enanthateBenzyl Alcohol 2ml 5% BA30.5 ml sesame oilSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Test Cypionate

    Powder: 5 grams
    Produces: 20 ml @ 250 mg/ml

    Requirements:*
    5 grams testosterone cypionate15.25 ml sesame oilBenzyl Alcohol 1 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Test Cypionate

    Powder: 10 grams
    Produces: 40 ml @ 250 mg/ml

    Requirements:*
    10 grams testosterone cypionate30.5 ml sesame oilBenzyl Alcohol 2 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Equipoise - boldenone undecylenate -*

    Note: Equipoise - boldenone undecylenate - is liquid at room temperature so use the following conversion: 1 ml of EQ = 1.18 grams

    Powder: 5 grams
    Produces: 25 ml @ 200 mg/ml

    Requirements:*
    5 grams Equipoise - boldenone undecylenate -20.50 ml sesame oilBenzyl Alcohol 0.75 ml 3% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Equipoise - boldenone undecylenate -*

    Note: Equipoise - boldenone undecylenate - is liquid at room temperature so use the following conversion: 1 ml of EQ = 1.18 grams

    Powder: 10 grams
    Produces: 50 ml @ 200 mg/ml

    Requirements:*
    10 grams Equipoise - boldenone undecylenate -41 ml sesame oilBenzyl Alcohol 1.5 ml 3% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Note:*If you have more than the equivalent of 10 grams of Equipoise - boldenone undecylenate - , it is recommended that you do the conversion all at the same time to avoid having to measure and calculate 5 or 10 gram equivalents each time.


    Test testosterone propionate

    Powder: 5 grams
    Produces: 50 ml @ 100 mg/ml

    Requirements:*
    5 grams test testosterone propionate36.25 ml sesame oilBenzyl Alcohol 2.5 ml 5% BABenzyl Benzoate 7.5 ml 15% BBSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialadd BB to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Test testosterone propionate

    Powder: 10 grams
    Produces: 100 ml @ 100 mg/ml

    Requirements:*
    10 grams test testosterone propionate72.5 ml sesame oilBenzyl Alcohol 5 ml 5% BABenzyl Benzoate 15 ml 15% BBSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialadd BB to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Deca-Durabolin - nandrolone decanoate -*

    Powder: 5 grams
    Produces: 25 ml @ 200 mg/ml

    Requirements:*
    5 grams Deca-Durabolin - nandrolone decanoate - - powder18.75 ml sesame oilBenzyl Alcohol 1.25 ml 5% BABenzyl Benzoate 1.25 ml 5% BBSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialadd BB to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.Deca-Durabolin - nandrolone decanoate -*

    Powder: 10 grams
    Produces: 50 ml @ 200 mg/ml

    Requirements:*
    10 grams Deca-Durabolin - nandrolone decanoate - - powder37.5 ml sesame oilBenzyl Alcohol 2.5 ml 5% BABenzyl Benzoate 2.5 ml 5% BBSyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialadd BB to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.trenbolone

    Note: this conversion is not for the pellet form

    Powder: 5 grams
    Produces: 50 ml @ 100 mg/ml

    Requirements:*
    5 grams trenbolone43.75 ml sesame oilBenzyl Alcohol 2.5 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 5 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.trenbolone

    Note: this conversion is not for the pellet form

    Powder: 10 grams
    Produces: 100 ml @ 100 mg/ml

    Requirements:*
    10 grams trenbolone87.5 ml sesame oilBenzyl Alcohol 5 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*
    measure 10 grams of powderplace the powder in the vialadd BA to the vialheat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)add the oil to the vial but save 2 ml of oil in the syringe for latergently shake the vial.reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stoveplace an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filterplace another needle in the sterile vial to relieve the pressuredraw out the solution with a syringe and run it though the Whatman filtertake the other syringe with 2ml of oil (saved previously) and run it through the Whatman filter into the solution.Winstrol

    Note: there is a tendency to ruin the product during conversion so only use one gram at a time

    Powder: 1 gram
    Produces: 20 ml at 50 mg/ml

    Requirements:*
    1 gram of winstrolone 20 ml glass vial or largerone 20 ml sterile glass vial or largerone 0.45 Whatman sterile syringe filtertwo 5 or 10 ml syringestwo 3 ml syringesthree 18 or 20 gauge pinstwo 22 gauge pins17 ml of sesame seed oil0.2 ml of benzyl alcohol2 ml of Mr.T super solventProcedure:*
    measure one gram of powderdraw out 2 ml of the Mr. T super solvent using one of the 3 ml syringesplace the measured powder in the open vial and add the solventplace the rubber stopper back on the vial and put one of the 20 gauge pins in the stopperplace the vial in a small pan and place the pan on the eye of the stoveheat until the powder dissolves into a liquid (usually around 239.8-242 degrees F)turn off the heat and let it cool down in the pan to room temperature (approx. 15 minutes)heat the oil in a suitable container in the oven until it reaches a minimum of 212 degrees F to sterilise it (it will be necessary to use slightly more oil than is required as all of it will not be able to be utilised)draw out 0.2 ml of benzyl alcohol (this will account for 1% of the solution so make sure the measurement is correct)add the benzyl alcohol to the solution in the vial and shake very gentlydraw out the oil with the 10 ml syringe (make sure the oil has cooled down somewhat before doing this)add 15 ml of the oil (saving 2 ml for later) to the solution in the vial and shake very gently Note: If the winstrol begins to clump back up, reheat the solution (place in a pan, put the pan on the eye of the stove and heat until it liquefies again) and allow it to cool down slowlyplace one of the 18 gauge pins in the sterile, unopened vial and attach the Whatman sterile filterdraw out the solution using the other 10 ml syringe, attach to the filter, and slowly press the solution out into the sterile vialuse the previously saved 2 ml of oil in the other syringe and run it through the filter to ensure that all the Winstrol passes throughafter the filtering process, leave the pin in the sterile vial and remove the filterplace the vial in a pan and place the pan on the eye of the stoveheat for 15-20 minutes, remove from heat, and let it cool down to room temperature (approx. 15 minutes)The finished solution will be light-gold in colour.
    Ensure that you follow the guidelines carefully for this conversion.

    For conversions larger than one gram, refer to the powder conversion calculator at the top of this page.


    -------------------------------------------------------


    POWDER TO LIQUID ORAL CONVERSIONS:


    Anadrol
    Powder: per 1 gram of Oxymetholone*
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Oxymetholone powder1 beaker suitable for holding the volume of liquids8.4 ml of PEG 30010.5 ml 190 Proof Grain AlcoholAnavar
    Powder: per 1 gram of Oxandrolone
    Produces: Highest concentration made - 20 mg/ml

    Requirements:*
    1 gram of Oxandrolone powder1 beaker suitable for holding the volume of liquids9.8 ml of PEG 30039.2 ml of 190 Proof Grain AlcoholArmidex
    Powder: per 1 gram of Anastrozole
    Produces: Highest concentration made - 5 mg/ml

    Requirements:*
    1 gram of Anastrozole powder1 beaker suitable for holding the volume of liquids19.9 ml of PEG 300179.1 ml of 190 Proof Grain AlcoholClomid
    Powder: per 1 gram of Clomiphene Citrate
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Clomiphene Citrate1 beaker suitable for holding the volume of liquids7.6 ml of Glycerol11.3 ml of 190 Proof Grain AlcoholClomid
    Powder: per 1 gram of Clomiphene Citrate
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Clomiphene Citrate1 beaker suitable for holding the volume of liquids8.4 ml of PEG 60010.5 ml of 190 Proof Grain AlcoholDianabol
    Powder: per 1 gram of Methandrostenolone
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Methandrostenolone powder1 beaker suitable for holding the volume of liquids19 ml of 190 Proof Grain AlcoholFemara
    Powder: per 1 gram of Letrozole
    Produces: Highest concentration made - 5 mg/ml

    Requirements:*
    1 gram of Letrozole powder1 beaker suitable for holding the volume of liquids19.9 ml of PEG 300179.1 ml of 190 Proof Grain AlcoholNolvadex
    Powder: per 1 gram of Tamoxifen Citrate
    Produces: Highest concentration made - 20 mg/ml

    Requirements:*
    1 gram of Tamoxifen Citrate1 beaker suitable for holding the volume of liquids19.6 ml of Glycerol29.4 ml of 190 Proof Grain AlcoholNolvadex
    Powder: per 1 gram of Tamoxifen Citrate
    Produces: Highest concentration made - 20 mg/ml

    Requirements:*
    1 gram of Tamoxifen Citrate1 beaker suitable for holding the volume of liquids9.8 ml of PEG 60039.2 ml of 190 Proof Grain AlcoholProviron
    Powder: per 1 gram of Mesterolone*
    Produces: Highest concentration made - 50 mg/ml

    Requirements:*
    1 gram of Mesterolone1 beaker suitable for holding the volume of liquids8.4 ml of PEG 30010.5 ml of 190 Proof Grain AlcoholWinstrol
    Powder: per 1 gram of Stanozolol
    Produces: Highest concentration made - 25 mg/ml

    Requirements:*
    1 gram of Stanozolol1 beaker suitable for holding the volume of liquids7.8 ml of PEG 30031.2 ml of 190 Proof Grain AlcoholFor all of the above conversions requiring PEG and 190 Proof Alcohol, use the following procedure:*
    place a sufficient amount of water in a pan and place on the stoveremove from heat when the water reaches boiling temperatureplace the powder and the PEG in the beakerimmerse the beaker in the pan of water so that the water is level with the top of the contents of the beakergently swirl or stir the contents of the beaker until the solution is clear (reheat the water if necessary)remove the beaker from the waterallow the PEG to cool downslowly add the 190 Proof Alcohol to the mixturegently stir until fully mixedFor all of the above conversions where PEG is not required, use the following procedure:*
    mix powder and 190 Proof Alcohol in the beakergently swirl or stir the contents of the beaker until the solution is clearthe majority of powders which do not require PEG will dissolve readily but for those that are troublesome, refer to the heating procedure as outlined aboveIn the event that 190 Proof Grain Alcohol (EverClear) is unavailable, then substitute Bacardi 151.

    Flavoured oils can also be added to mask the taste if that is your preference.




    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Brother did you forget to add the BB on the Test C, and Tren @ 100mg each? I didn't read the rest of the recipes just those first two. So I didn't see if the rest of them were correct or not, but Tren A @100mg needs 12%BB, and Test C definitely will not hold @ 250mg without a minimum of 18%BB, and that's using Miglyol840 as a carrier. If using any other carrier will you will need 20% BB and 2% EO. You might be able to get away with 18% BB (but probably not) if you live in a warm climate. The last thing I'm trying to do is Bash your recipes. as you know I respect you and think you're one of the smartest individuals out there when it comes to how to run gear. I just don't want any members trying to make a product that ends up crashing on them. One thing about this hobby or never done learning so if you know something I don't please let me know..

    Sent from my SM-G965U using Tapatalk
     

  10. #10
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by Macho313 View Post
    Brother did you forget to add the BB on the Test C, and Tren @ 100mg each? I didn't read the rest of the recipes just those first two. So I didn't see if the rest of them were correct or not, but Tren A @100mg needs 12%BB, and Test C definitely will not hold @ 250mg without a minimum of 18%BB, and that's using Miglyol840 as a carrier. If using any other carrier will you will need 20% BB and 2% EO. You might be able to get away with 18% BB (but probably not) if you live in a warm climate. The last thing I'm trying to do is Bash your recipes. as you know I respect you and think you're one of the smartest individuals out there when it comes to how to run gear. I just don't want any members trying to make a product that ends up crashing on them. One thing about this hobby or never done learning so if you know something I don't please let me know..

    Sent from my SM-G965U using Tapatalk
    Those are copy and paste and it was very old.
    Not interested in making it myself it was just for info to contribute.
    I am pretty sure those are all proven actually positive from years of people concurring.
    That post is so old that they methods may have been different but the raws maybe more pure??

    But here is copy of test c
    It says 1ml ba and 5% bb
    It just come out or pasted crappy

    5 grams testosterone cypionate15.25 ml sesame oilBenzyl Alcohol 1 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  11. #11
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by Muscle mechanic View Post
    Those are copy and paste and it was very old.
    Not interested in making it myself it was just for info to contribute.
    I am pretty sure those are all proven actually positive from years of people concurring.
    That post is so old that they methods may have been different but the raws maybe more pure??

    But here is copy of test c
    It says 1ml ba and 5% bb
    It just come out or pasted crappy

    5 grams testosterone cypionate15.25 ml sesame oilBenzyl Alcohol 1 ml 5% BASyringes 3cc & 5/10cc18 or 20 gauge needlesVialSterile VialWhatman sterile filterProcedure:*

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    I just copied it and pasted.
    People from the original poster posted on them.
    It's just for info for where laws allow such things....
    AND as said it's very old, Mig wasn't used no where then and today lots of people allergic to it...
    So besides the check your laws which all adults responsible to do this board reaches places that have different laws than where I live...
    Mig and EO can cause allergy to many....

    Just wanted to say that and have no interest for making anything. My job is going well I finally will afford to milk bulls or go to anti-aging clinics... lmao!!

    "All post for entertainment purposes"

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  12. #12
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by Macho313 View Post
    Brother did you forget to add the BB on the Test C, and Tren @ 100mg each? I didn't read the rest of the recipes just those first two. So I didn't see if the rest of them were correct or not, but Tren A @100mg needs 12%BB, and Test C definitely will not hold @ 250mg without a minimum of 18%BB, and that's using Miglyol840 as a carrier. If using any other carrier will you will need 20% BB and 2% EO. You might be able to get away with 18% BB (but probably not) if you live in a warm climate. The last thing I'm trying to do is Bash your recipes. as you know I respect you and think you're one of the smartest individuals out there when it comes to how to run gear. I just don't want any members trying to make a product that ends up crashing on them. One thing about this hobby or never done learning so if you know something I don't please let me know..

    Sent from my SM-G965U using Tapatalk
    Any knowledge u can share is appriciated!!


    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  13. #13
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by Macho313 View Post
    Brother did you forget to add the BB on the Test C, and Tren @ 100mg each? I didn't read the rest of the recipes just those first two. So I didn't see if the rest of them were correct or not, but Tren A @100mg needs 12%BB, and Test C definitely will not hold @ 250mg without a minimum of 18%BB, and that's using Miglyol840 as a carrier. If using any other carrier will you will need 20% BB and 2% EO. You might be able to get away with 18% BB (but probably not) if you live in a warm climate. The last thing I'm trying to do is Bash your recipes. as you know I respect you and think you're one of the smartest individuals out there when it comes to how to run gear. I just don't want any members trying to make a product that ends up crashing on them. One thing about this hobby or never done learning so if you know something I don't please let me know..

    Sent from my SM-G965U using Tapatalk
    Those are Kian Phillips recipes!!
    I copied and pasted. Couldn't remember name in other quotes had to look back.

    I snagged the info to post. Lol!!

    I have no recipes. Lol!! Except for food.
    Almost lost my family over losing my temper, now I got to show and live that I am sorry. True story!!! Not about to have or do anything illegal!!
    I have a legit business licensed and insured registered at my State.
    Thankfully a door closed and a window opened to me having balls to go on my own in mechanic industry self employed now.
    No chances for me.

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  14. #14
    MuscleChemistry Registered Member Board Certified DMD
    Macho313's Avatar
    Join Date
    Oct 2015
    Posts
    527
    Rep Power
    2147484183

    Default

    I agree with you on everything you just said. Unfortunately at one time we can all live I guess you could call it right. The past is the past however I did learn some things that others are probably looking to learn.

    I've always liked this bored and think Presser is a good guy who has done nothing, but help me out. There for I'm going to get back to the community by saying if anyone has any questions. I'll answer them to the best of my ability. Don't get me wrong I'm no genius, and never claimed to be, but I'll do my best to guide you in the right direction.

    I'm glad to hear you're doing good with your own business and wish i you, and everyone else on this fourm nothing but the best. As you already know I look at you as one of the smartest individuals on these fourms. Everybody has their area of expertise, and we'll all here to learn.




    As Mechanic just said all posts are for entertainment purposes only or for those living in other parts of the world where laws are different.

    Quote Originally Posted by Muscle mechanic View Post
    I just copied it and pasted.
    People from the original poster posted on them.
    It's just for info for where laws allow such things....
    AND as said it's very old, Mig wasn't used no where then and today lots of people allergic to it...
    So besides the check your laws which all adults responsible to do this board reaches places that have different laws than where I live...
    Mig and EO can cause allergy to many....

    Just wanted to say that and have no interest for making anything. My job is going well I finally will afford to milk bulls or go to anti-aging clinics... lmao!!

    "All post for entertainment purposes"

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Sent from my SM-G965U using Tapatalk
    Thanks Muscle mechanic thanked for this post
    Likes Muscle mechanic, blacktail liked this post
     

  15. #15
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by Macho313 View Post
    I agree with you on everything you just said. Unfortunately at one time we can all live I guess you could call it right. The past is the past however I did learn some things that others are probably looking to learn.

    I've always liked this bored and think Presser is a good guy who has done nothing, but help me out. There for I'm going to get back to the community by saying if anyone has any questions. I'll answer them to the best of my ability. Don't get me wrong I'm no genius, and never claimed to be, but I'll do my best to guide you in the right direction.

    I'm glad to hear you're doing good with your own business and wish i you, and everyone else on this fourm nothing but the best. As you already know I look at you as one of the smartest individuals on these fourms. Everybody has their area of expertise, and we'll all here to learn.




    As Mechanic just said all posts are for entertainment purposes only or for those living in other parts of the world where laws are different.



    Sent from my SM-G965U using Tapatalk
    Thank u!!

    AND I am here same as u said.
    Good legit board and we just have interest and knowledge from learning and past experiences.

    Glad your here and freedom of speech on info is what we do in things that interest us!!

    Macho we love this sport and all of this in my opinion is sports medicine.
    They allow sex changes for crying out loud and it legal!! OMG! Lmao...

    I was researching tbol and east German athletes other day. That woman had to have sex change cause she had become a man... really. And alot of them were told they were vitamins..

    Any info appreciated brother glad to see your knowledge. If i could I would make gear for myself or try but woman would kill me!!!

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  16. #16
    MuscleChemistry Senior Board Certified Psy.D

    Join Date
    Mar 2017
    Posts
    433
    Rep Power
    722

    Default

    masteron tren test prop cut 150 mix I had recipe for gotta find it again
     

  17. #17
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by whatsup View Post
    masteron tren test prop cut 150 mix I had recipe for gotta find it again
    I have used test ace tren ace mast prop all at 100 so 300mg total have 1 left but I need 4. Plus each on own. Lol!! I use at 75-100 of all a day.

    But I lower stack mix and add in tren and mast to lower test when sides start..

    I also like one i used it's 400 Cutter!!
    Test p 100 tren a 100 mast p 100 and primo a 100. This one my favorite need 4 and cut back and get each on own to add in with test lower after 3 vials.

    Lol!! Vial last me around 13 days a guess!

    I can run 50 of all those with no sides a day..
    I get a little aggressive with tren ace 75-100 a day.

    Don't ask me how they make...

    I can make for myself but only single things. But lady would start too much shit would not be worth it....
    So if i find it laying around I keep in a cave I know that stays 70 degrees year round.
    AND it's a workout each trip, reason I stay leaner these days with less effort. Lol

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  18. #18
    MuscleChemistry Registered Member Board Certified DMD
    Macho313's Avatar
    Join Date
    Oct 2015
    Posts
    527
    Rep Power
    2147484183

    Default

    Quote Originally Posted by whatsup View Post
    masteron tren test prop cut 150 mix I had recipe for gotta find it again
    Are you looking to do Mast P @25mg Tren A @75 mg and Test P @75 mg? If so and you're using MCT oil for Mig840 as a carrier
    2%BA
    20%BB

    If you're using safflower cottonseed or any other carrier oil you're probably going to need to drop the BB to 14% add 5% EO.

    A a lot of people think there are allergic to EO. In fact I was one of them for 5 years, but most of the time it's because a lot of ugl's add a super solvent such as EO or Guaiacol leave the amount of BB the same. When you add a super solvent obviously over you can lower the amount of BB. 9 times out of 10 the swelling and redness is not from EO it's from having too much solvent in the mix at one time.



    Sent from my SM-G965U using Tapatalk
    Likes Muscle mechanic liked this post
     

  19. #19
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by Macho313 View Post
    Are you looking to do Mast P @25mg Tren A @75 mg and Test P @75 mg? If so and you're using MCT oil for Mig840 as a carrier
    2%BA
    20%BB

    If you're using safflower cottonseed or any other carrier oil you're probably going to need to drop the BB to 14% add 5% EO.

    A a lot of people think there are allergic to EO. In fact I was one of them for 5 years, but most of the time it's because a lot of ugl's add a super solvent such as EO or Guaiacol leave the amount of BB the same. When you add a super solvent obviously over you can lower the amount of BB. 9 times out of 10 the swelling and redness is not from EO it's from having too much solvent in the mix at one time.



    Sent from my SM-G965U using Tapatalk
    I nice blend would be tren a 100, test p 70,
    Mast p 100-125.
    It's this possible?

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  20. #20
    Presser's Avatar
    Join Date
    May 2002
    Posts
    41,683
    Rep Power
    2147525352

    Default

    Quote Originally Posted by Macho313 View Post
    Are you looking to do Mast P @25mg Tren A @75 mg and Test P @75 mg? If so and you're using MCT oil for Mig840 as a carrier
    2%BA
    20%BB

    If you're using safflower cottonseed or any other carrier oil you're probably going to need to drop the BB to 14% add 5% EO.

    A a lot of people think there are allergic to EO. In fact I was one of them for 5 years, but most of the time it's because a lot of ugl's add a super solvent such as EO or Guaiacol leave the amount of BB the same. When you add a super solvent obviously over you can lower the amount of BB. 9 times out of 10 the swelling and redness is not from EO it's from having too much solvent in the mix at one time.



    Sent from my SM-G965U using Tapatalk
    You sure about the ethyl oleate "EO" not being the cause of the pain? i am one of those people who experiences tremendous pain from products that use EO, and i thought we had an article here explaining the EO was the pain issue and that some are actually allergic or rather have very bad reaction to it. Thats not the case?
    Steroid conversions

  21. #21
    MuscleChemistry Registered Member Board Certified DMD
    Macho313's Avatar
    Join Date
    Oct 2015
    Posts
    527
    Rep Power
    2147484183

    Default

    Quote Originally Posted by Presser View Post
    You sure about the ethyl oleate "EO" not being the cause of the pain? i am one of those people who experiences tremendous pain from products that use EO, and i thought we had an article here explaining the EO was the pain issue and that some are actually allergic or rather have very bad reaction to it. Thats not the case?
    Nah brother I'm definitely not saying that some people aren't allergic to it. Just like MCT oil or Mig840 (Aka Mig812 or Mig840) there's definitely some people allergic to both. Like I said I personally thought I was one of those people for well over 5 years until it was brought to my attention that most ugl's or most people either don't know what they're doing or just plain old don't give a F***. Therefore when making a product for instance something basic like Test C 250 you could use 20%BB or you could add 5%EO, and drop your BB down to 15%, but some people don't take into account that when adding another solvent such as EO you don't need such a high content of another solvent like BB. I was telling a guy that has been in the business a long time that I was allergic to EO when he told me this, and he told me to prove his point that I should inject 1/2CC of 100% EO, AND HONESTLY I THOUGHT HE WAS OUT OF HIS MIND.LOL. However considering his background I want a head and took the plunge literally and did the 1/2CC of EO, and believe it or not the next day I was completely fine. Again I'm not saying some people aren't allergic to it, but like in my case this could be the reason that so many people think they are allergic to it.

    In no way am I telling anybody else to do this. So please don't anyone try this. What works for me might not work for the next guy like most stuff we deal with. I'm just speaking from personal experience and trying to help out anyone that I can..

    Sent from my SM-G965U using Tapatalk
     

  22. #22
    MuscleChemistry Registered Member Board Certified DMD
    Macho313's Avatar
    Join Date
    Oct 2015
    Posts
    527
    Rep Power
    2147484183

    Default

    Quote Originally Posted by Muscle mechanic View Post
    I nice blend would be tren a 100, test p 70,
    Mast p 100-125.
    It's this possible?

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Sorry I just seen this post brother. My answer would be yes of course anything is possible depending on how much and what kind of solvents you wanted to use. However I wouldn't personally suggest this blend only because the carrier oil would have to either be 100% EO or you would need to add some Guaiacol. Another thing is to be completely honest blends never really where my thing, and i would never want to get it give an answer to a question that I honestly don't know the correct answer to.

    If you really want to make this blend I have no problem giving you a recipe that would work to the best of my knowledge. Just let me know?

    Sent from my SM-G965U using Tapatalk
     

  23. #23
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by Macho313 View Post
    Sorry I just seen this post brother. My answer would be yes of course anything is possible depending on how much and what kind of solvents you wanted to use. However I wouldn't personally suggest this blend only because the carrier oil would have to either be 100% EO or you would need to add some Guaiacol. Another thing is to be completely honest blends never really where my thing, and i would never want to get it give an answer to a question that I honestly don't know the correct answer to.

    If you really want to make this blend I have no problem giving you a recipe that would work to the best of my knowledge. Just let me know?

    Sent from my SM-G965U using Tapatalk
    I an big one pinning 1ml as opposed to 3 or 4 a day.
    I use tren at 75-100 mg a,day mast 125 test p 50-100 during this.
    I use a blend 100 of each 300 total
    And one 400 with primo ace added

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  24. #24
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by Muscle mechanic View Post
    I an big one pinning 1ml as opposed to 3 or 4 a day.
    I use tren at 75-100 mg a,day mast 125 test p 50-100 during this.
    I use a blend 100 of each 300 total
    And one 400 with primo ace added

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    EO or glu fish smell stuff doesn't bother me

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  25. #25
    MuscleChemistry Registered Member Board Certified DMD
    Macho313's Avatar
    Join Date
    Oct 2015
    Posts
    527
    Rep Power
    2147484183

    Default

    Quote Originally Posted by Muscle mechanic View Post
    I an big one pinning 1ml as opposed to 3 or 4 a day.
    I use tren at 75-100 mg a,day mast 125 test p 50-100 during this.
    I use a blend 100 of each 300 total
    And one 400 with primo ace added

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Haha, you're the fucking man. No wonder you stay so damn lean and ripped. If I had to make it at 100mg each Tren A, Mast P, and Test P. I would use 2%BA, 18%BB, and 50/50 Mig840/EO. I'm pretty sure that would hold.

    Sent from my SM-G965U using Tapatalk
     

  26. #26
    MuscleChemistry Registered Member Board Certified DMD
    Macho313's Avatar
    Join Date
    Oct 2015
    Posts
    527
    Rep Power
    2147484183

    Default

    Quote Originally Posted by Muscle mechanic View Post
    EO or glu fish smell stuff doesn't bother me

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    I agree with you but there's some stuff I just can't bring myself to try. for instance check this out and tell me if you would try it.lol

    I call this a domestic dispute waiting to happen.lol

    Domestic dispute juice 100mg
    25mg Test Base, 25mg Tren Base, 25mg Dbol, 25mg, Adrol
    2%BA
    50%BB
    17%G
    25%EO

    In 100ml there's literally only 6mL of carrier oil

    Sent from my SM-G965U using Tapatalk
     

  27. #27
    MuscleChemistry Registered Member Board Certified DMD
    Macho313's Avatar
    Join Date
    Oct 2015
    Posts
    527
    Rep Power
    2147484183

    Default

    Quote Originally Posted by Muscle mechanic View Post
    I an big one pinning 1ml as opposed to 3 or 4 a day.
    I use tren at 75-100 mg a,day mast 125 test p 50-100 during this.
    I use a blend 100 of each 300 total
    And one 400 with primo ace added

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Anyone or any lab making Primo Ace that doesn't bite like a snake knows what they're doing. I personally never try to make it but my buddy has, and he says it's no joke...

    Sent from my SM-G965U using Tapatalk
     

  28. #28
    MuscleChemistry Vet Board Certified Psy.D
    thx's Avatar
    Join Date
    Jul 2015
    Posts
    387
    Rep Power
    2147484043

    Default

    Haha just noticed the mistake. Must have been tired when I read all those recipes.

    1 gram of Mesterolone1 beaker suitable for holding the volume of liquids8.4 ml of PEG 30010.5 ml of 190 Proof Grain AlcoholWinstrol


    should be liquids 8.4 ml of PEG 300 ___ 10.5 ml of 190 Proof Grain
    Sink, suffer, self-destruct. Rise stronger, reconstruct

  29. #29
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by Macho313 View Post
    I agree with you but there's some stuff I just can't bring myself to try. for instance check this out and tell me if you would try it.lol

    I call this a domestic dispute waiting to happen.lol

    Domestic dispute juice 100mg
    25mg Test Base, 25mg Tren Base, 25mg Dbol, 25mg, Adrol
    2%BA
    50%BB
    17%G
    25%EO

    In 100ml there's literally only 6mL of carrier oil

    Sent from my SM-G965U using Tapatalk
    Nope!!
    Tren base scares me, dbol is trash.

    The the other 2 yes but the first 2. Toss them

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  30. #30
    MuscleChemistry Registered Member Board Certified DMD
    Macho313's Avatar
    Join Date
    Oct 2015
    Posts
    527
    Rep Power
    2147484183

    Default

    Quote Originally Posted by Muscle mechanic View Post
    Nope!!
    Tren base scares me, dbol is trash.

    The the other 2 yes but the first 2. Toss them

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Oh brother trust me I agree with you on that I wouldn't personally use this myself. This is from back in my hay day you know it's all about supply and demand..lol.

    Personally I use something called ignite 100mg it's
    75mg Test Base
    25mg Adrol..



    Sent from my SM-G965U using Tapatalk
    Likes Muscle mechanic liked this post
     

  31. #31
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by Macho313 View Post
    Oh brother trust me I agree with you on that I wouldn't personally use this myself. This is from back in my hay day you know it's all about supply and demand..lol.

    Personally I use something called ignite 100mg it's
    75mg Test Base
    25mg Adrol..



    Sent from my SM-G965U using Tapatalk
    I only can handle tren ace.
    The tren e has built up and had me take week off work thinking I would blow years ago after no issues years before but wife and kids changed that.
    But I haven't tried with low test with tren e like I run ace now.
    Dbol bloats me too much at my age!!
    Tren base and MTrien I am afraid of...
    Just a grateful member!!

  32. #32
    MuscleChemistry Registered Member Board Certified DMD
    Macho313's Avatar
    Join Date
    Oct 2015
    Posts
    527
    Rep Power
    2147484183

    Default

    Quote Originally Posted by Muscle mechanic View Post
    I only can handle tren ace.
    The tren e has built up and had me take week off work thinking I would blow years ago after no issues years before but wife and kids changed that.
    But I haven't tried with low test with tren e like I run ace now.
    Dbol bloats me too much at my age!!
    Tren base and MTrien I am afraid of...
    I'm with you brother I've tried to run Tren a twice and both times I didn't make it past the week due to bad anxiety. I was actually thinking about giving it another shot maybe this week I feel as though I'm a little opposite now that I've got older I'm a lot more laid back so I'm hoping I can handle it. I usually only run my test at about 4 or 500mg a week. What would you suggest I do with my test dose if I add tren A?

    I also wouldn't mind trying some MTR however it's damn near impossible to find.

    Sent from my SM-G965U using Tapatalk
     

  33. #33
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by Macho313 View Post
    I'm with you brother I've tried to run Tren a twice and both times I didn't make it past the week due to bad anxiety. I was actually thinking about giving it another shot maybe this week I feel as though I'm a little opposite now that I've got older I'm a lot more laid back so I'm hoping I can handle it. I usually only run my test at about 4 or 500mg a week. What would you suggest I do with my test dose if I add tren A?

    I also wouldn't mind trying some MTR however it's damn near impossible to find.

    Sent from my SM-G965U using Tapatalk
    Just handle tren ace.
    50mg a day to 75mg a day
    Test ace or prop at 50mg a day
    Mast 100-125mg a day

    That is how I use tren ace.
    Lower test helps alot..
    But 50mg test and tren not a problem either. Everyday works better for me...

    Higher test than that issues start.... like having the ugly's from Ex back in day. Grindy feeling but not happy like Ex back in day... just aggrevated at anything real easy...
    Lol!.

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  34. #34
    MuscleChemistry Registered Member Board Certified DMD
    Macho313's Avatar
    Join Date
    Oct 2015
    Posts
    527
    Rep Power
    2147484183

    Default

    Quote Originally Posted by Muscle mechanic View Post
    Just handle tren ace.
    50mg a day to 75mg a day
    Test ace or prop at 50mg a day
    Mast 100-125mg a day

    That is how I use tren ace.
    Lower test helps alot..
    But 50mg test and tren not a problem either. Everyday works better for me...

    Higher test than that issues start.... like having the ugly's from Ex back in day. Grindy feeling but not happy like Ex back in day... just aggrevated at anything real easy...
    Lol!.

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Definitely bro I agree with you as always. I'm going to drop my test down to 300 a week and run 50 mg of Tren a ED. I APPRECIATE THE ADVICE..

    Sent from my SM-G965U using Tapatalk
    Likes Muscle mechanic liked this post
     

  35. #35
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Quote Originally Posted by Macho313 View Post
    Definitely bro I agree with you as always. I'm going to drop my test down to 300 a week and run 50 mg of Tren a ED. I APPRECIATE THE ADVICE..

    Sent from my SM-G965U using Tapatalk
    Got something for u, can u help??
    yohimbine hcl injection / Helios recipes

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

  36. #36
    MuscleChemistry Registered Member Board Certified MD
    Muscle mechanic's Avatar
    Join Date
    Sep 2016
    Posts
    3,675
    Rep Power
    2147487330

    Default

    Bump for proven recipes....
    These are old from a copy and paste but if they worked they work...
    The most basic things suit the home brewer who makes own gear for person use...
    Why get fancy??
    Coming out for a fraction of cost....

    I have family nowhere to attempt this, but for who can, have at it

    Sent from my SAMSUNG-SM-G890A using Tapatalk
    Just a grateful member!!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in