Thread: How to make liquid anavar

Oxandrolone is one of the hardest powders to convert into an oral suspension. It clumps and doest disperse evenly even after shaking it well.

Anyone know of a solid carrier suspension to use with anavar powder?

Oral steroid prefix test thread.

test reply

Originally Posted by Presser

Oxandrolone is one of the hardest powders to convert into an oral suspension. It clumps and doest disperse evenly even after shaking it well.

Anyone know of a solid carrier suspension to use with anavar powder?

Oral steroid prefix test thread.

PEG-300. It all depends, what concentration do you want to make?

Originally Posted by Presser

test reply

draws ones attention to it. as for a recipe, i've use ora-plus 50% w/ a little honey and the rest with distilled water. granted i made it at 10 mg/ml for my wife. so that may be why it worked okay. my wife prefers a tablet instead. i've been experimenting with using oil. gsl isn't so good for taste. mct oil is a bit better. everything i've tried with it has worked so far. i also use alcohol base with honey, if it's something that clumps though, it doesn't work so well. just need to figure out how to make it with oil so it's a little more palatable.

i needed to edit my post, haven't tried oil for var, yet. don't have any powder on hand for it.

I made it already had post up here somewhere. Had to shake it so very very very important to grind into the smallest particles u can...

I made 2 batches. 1 was with an old "Super-Solution" I had purchased years ago from Hardcore-powders a research shop around 6 years ago..
"Super-solution" didn't do it, so I drew out liquid and crushed sandy pieces at bottom of coffee cup and added a little 190 proof everclear then dumped rest back together. Think I had 20mg per ml and nasty!!!
Also added heat and couldn't get to melt. So had to shake!!! Was gross and gave me heart burn.. Think I may have bottle with rest at bottom still... lol!

The next time I capped them. I followed a guide and crushed and grinded then used whey protien to cut for desired mixture to cap.... made 50mg caps...

I will see if I can get a recipe on a liquid for MC but I would only cap but I will only get as made tabs if I desire them... lol!!

- - - Updated - - -

I will try and get recipes for u guys. I gotta do alot of digging but when I post one it can be trusted

Originally Posted by Muscle mechanic

I made it already had post up here somewhere. Had to shake it so very very very important to grind into the smallest particles u can...

I made 2 batches. 1 was with an old "Super-Solution" I had purchased years ago from Hardcore-powders a research shop around 6 years ago..
"Super-solution" didn't do it, so I drew out liquid and crushed sandy pieces at bottom of coffee cup and added a little 190 proof everclear then dumped rest back together. Think I had 20mg per ml and nasty!!!
Also added heat and couldn't get to melt. So had to shake!!! Was gross and gave me heart burn.. Think I may have bottle with rest at bottom still... lol!

The next time I capped them. I followed a guide and crushed and grinded then used whey protien to cut for desired mixture to cap.... made 50mg caps...

I will see if I can get a recipe on a liquid for MC but I would only cap but I will only get as made tabs if I desire them... lol!!

- - - Updated - - -

I will try and get recipes for u guys. I gotta do alot of digging but when I post one it can be trusted

as i recall, i used a mortar and pestle to grind mine up. made it real fine and that helped.

Originally Posted by Muscle mechanic

I made it already had post up here somewhere. Had to shake it so very very very important to grind into the smallest particles u can...

I made 2 batches. 1 was with an old "Super-Solution" I had purchased years ago from Hardcore-powders a research shop around 6 years ago..
"Super-solution" didn't do it, so I drew out liquid and crushed sandy pieces at bottom of coffee cup and added a little 190 proof everclear then dumped rest back together. Think I had 20mg per ml and nasty!!!
Also added heat and couldn't get to melt. So had to shake!!! Was gross and gave me heart burn.. Think I may have bottle with rest at bottom still... lol!

The next time I capped them. I followed a guide and crushed and grinded then used whey protien to cut for desired mixture to cap.... made 50mg caps...

I will see if I can get a recipe on a liquid for MC but I would only cap but I will only get as made tabs if I desire them... lol!!

- - - Updated - - -

I will try and get recipes for u guys. I gotta do alot of digging but when I post one it can be trusted

Lmao , quite literally everyone who has posted here over the years has always wound up trying to salvage what’s left of their oxandrolone anavar powder by capping the rest after their oral liquid recipes always clumped the dropper and never shook even! Myself included as anavar ain’t cheap! Lol

Depending on what concentration you're making, PEG and 90-95% ethanol will dissolve most compounds. At least all the ones I've tried.

Using oil is not recommended, I've tried it a couple of times.

Originally Posted by thx

Depending on what concentration you're making, PEG and 90-95% ethanol will dissolve most compounds. At least all the ones I've tried.

Using oil is not recommended, I've tried it a couple of times.

good to know, i didn't have any when to try with oil. maybe get one of those mg spoons on amazon. figure the measure and just dump it in oj. lol.

Originally Posted by pgb

good to know, i didn't have any when to try with oil. maybe get one of those mg spoons on amazon. figure the measure and just dump it in oj. lol.

I read that oil will make aromasin get absorbed better, like 40% or something. So I had this great idea to try to make an oilbased aromasin solution. Aromasin is almost "flaky" so it was a really bad idea. Managed to dissolve some of it. But some just gathered on the bottom.

I later read that some pharma companies used ethanol to fully dissolve it at 20mg/ml or something. Never had any issues with dissolving gear with high grade ethanol.

So if you don't mind the taste, just use everclear.

Make them into gummies instead of liquids

Originally Posted by thx

I read that oil will make aromasin get absorbed better, like 40% or something. So I had this great idea to try to make an oilbased aromasin solution. Aromasin is almost "flaky" so it was a really bad idea. Managed to dissolve some of it. But some just gathered on the bottom.

I later read that some pharma companies used ethanol to fully dissolve it at 20mg/ml or something. Never had any issues with dissolving gear with high grade ethanol.

So if you don't mind the taste, just use everclear.

No kidding! Anavar oxandrolone powder I would describe as flaky too just like you described the aromisin powder. I’ll bet oil suspension would work for the anavar as well with a little trial and error finding the right amount of alcohol to add in

I make liquid oral Proviron,Winny and Var
I have used Humco Syrpalta and also of late been using 50/50 mix of Ora Plus and Ora Sweet
Yes it is kinda grainy and can clump
You just gotta shake it well each time before using
But it gets the job done

OXandrolone is a bitch

I have yet to find a way to put var into solution. Suspension, yes. Just add pretty much any alcohol or pg/peg and shake that mother up before each use.

I don't understand why people use alcohol at all. They don't do that for pills.

You just weigh up a 30 dose supply and mix with 30ml of Humco or even olive oil and take 1ml a day after shaking it up. Hell, I've even used thickened water they sell at CVS.
So if you want your dosage at 50mg you would need to weigh 1500mg of powder and mix with 30ml of liquid.

Originally Posted by thx

Depending on what concentration you're making, PEG and 90-95% ethanol will dissolve most compounds. At least all the ones I've tried.

Using oil is not recommended, I've tried it a couple of times.

Will this work will 25 mg anavar or do you need Peg 300 or 400 or something like that? Also can you substitute the ethanol for Everclear?

Last but not least. Will this make a solution or suspension?

Sent from my LM-V405 using Tapatalk

Originally Posted by Macho313

Will this work will 25 mg anavar or do you need Peg 300 or 400 or something like that? Also can you substitute the ethanol for Everclear?

Last but not least. Will this make a solution or suspension?

Sent from my LM-V405 using Tapatalk

Just my 2 cents... First Off, Macho!!! Everclear is Ethanol. Same thing. And as to the Anavar, There was a guy in this thread that mentioned gummies. Well, you can also make candies. Like now and laters. Now and later orals. Taste great and dosage is spot on. If interested I will outline the candy recipe for the bros here... Also, I would give input on liquid oral recipe for var but as stated here earlier in the thread, it tastes like shit. My opinion on it is this, I'm worried about getting the product in my body as evenly dosed as possible, not the taste. So if taste is not a worry, then just make that at whatever dose you like in pure grain alcohol or everclear or ethanol, same thing. Make it at whatever mg/ml and draw that ml up, squirt it in a shot glass full of your favorite juice then shoot it like a shot of rum or anything else, doesn't taste bad at all imho and works great cause the alcohol breaks that shit down great!!!

IVE YET TO EVER SEE OXANDROLONE (ANAVAR) POWDER THAT DISSOLVED EVENLY IN EVERCLEAR