Oral Liquid Recipes

Greatest thread on oral liquid recipes.
Bignick said:
For each hormone I listed ingredients needed. For the procedure scroll down.

Anadrol:
Highest concentration made - 50mg/ml
Per 1 gram of Oxymetholone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol

Anavar:
Highest concentration made - 20mg/ml
Per 1 gram of Oxandrolone powder you will need:
9.8 ml's of PEG 300
39.2 ml's of 190 Proof Grain Alcohol

Armidex:
Highest concentration made - 5mg/ml
Per 1 gram of Anastrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol

Clomid:
Highest concentration made - 50mg/ml
Per 1 gram of Clomiphene Citrate you will need:
8.4 ml's of PEG 600
10.5 ml's 190 Proof Grain Alcohol

Dianabol:
Highest concentration made - 50mg/ml
Per 1 gram of Methandrostenolone powder you will need:
19 ml's of 190 Proof Grain Alcohol
No PEG needed. Follow the no PEG recipe.

Femara:
Highest concentration made - 5mg/ml
Per 1 gram of Letrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol

Nolvadex:
Highest concentration made - 20mg/ml
Per 1 gram of Tamoxifen Citrate you will need:
9.8 ml's of PEG 600
39.2 ml's of 190 Proof Grain Alcohol

Proviron:
Highest concentration made - 50mg/ml
Per 1 gram of Mesterolone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol

Winstrol:
Highest concentration made - 25 mg/ml
Per 1 gram of Stanzolol you will need:
7.8 ml's of PEG 300
31.2 ml's of 190 Proof Grain Alcohol


---------------------------------------------------------------------------------

Solutions requiring PEG and 190 Proof Alcohol

Step 1. Prepare a hot water bath. Boil water in microwave or on a pot. Once boiling starts remove from heat.

Step 2. Place PEG and powder in beaker.

Step 3. Place the beaker deep enough in to the water so that the hot water is level with the PEG and powder. Gently swirl or stir with a stir rod until solution is clear. Reheat water as needed.

Step 4. Allow PEG to cool some. Then add in your 190 proof alcohol. You don't have to do this drop by drop but don't just dump it in. Pour it in slowly.

Step 5. Stir or gently shake until mixed.



For recipes that do not require PEG.

1. Mix powder and 190 proof alcohol.

2. Stir with stir rod or shake. Most powders that do not require PEG will disolve no problem. If heat is needed follow the instructions for heating powders that use PEG
Click to expand...
 
So for any of these orals you just use the same dosage but in humco?

Anadrol:
Highest concentration made - 50mg/ml
Per 1 gram of Oxymetholone you will need:
8.4 ml's of PEG 300 <<<<
10.5 ml's 190 Proof Grain Alcohol <<<<

would you do 18.9 mls of humco per 1 gram of oxy?
 
jman82 said:
So for any of these orals you just use the same dosage but in humco?

Anadrol:
Highest concentration made - 50mg/ml
Per 1 gram of Oxymetholone you will need:
8.4 ml's of PEG 300 <<<<
10.5 ml's 190 Proof Grain Alcohol <<<<

would you do 18.9 mls of humco per 1 gram of oxy?
Click to expand...

Also is 1 gram for a single dose? Im trying to learn as much as possible before jumping in full fledge and trying these all out. So lets say I wanted to make an 8 week cycle of the androl at 50mg a day 3 days a weeks so I would need 150mg a week so 1200mg for 8 weeks. So you would need 24grams of raw powder? If you mix it all up into a dropper bottle how much do you take to ensure your getting that 50mg serving?
 
You do not need peg with clomid and nolvadex
you have to mix it slowly and slaw it before use
but it's a stable suspension without peg
and no toxicity
 
What the fuck is peg anyhow lmao, and yes clomiphene and Tamoxifen work perfectly with just an alcohol and water combination mixture. It will settle but just needs a few shakes prior to using it and it will be an even dosing with a good shaking
 
It's an organic solution derived from sugar cane waste
its used in liquid antibiotics and medicines that require a solution without
getting old or degrading quickly like water does
 
Anadrol:
Highest concentration made - 50mg/ml
Per 1 gram of Oxymetholone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol

Anavar:
Highest concentration made - 20mg/ml
Per 1 gram of Oxandrolone powder you will need:
9.8 ml's of PEG 300
39.2 ml's of 190 Proof Grain Alcohol

Armidex:
Highest concentration made - 5mg/ml
Per 1 gram of Anastrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol



Dianabol:
Highest concentration made - 50mg/ml
Per 1 gram of Methandrostenolone powder you will need:
19 ml's of 190 Proof Grain Alcohol
No PEG needed. Follow the no PEG recipe.



I have tried , can't be used
 
I make all orals at any dose I want even 100mg/ml across the board with Humco Syrpalta only no heat needed nothing but measure add and shake. Love it.

Sent from my LG-H830 using Tapatalk
 
When I make winstrol using this recipe after a week or so it starts forming small crystals in the solution. Can anyone tell me what I am doing wrong?


Sent from my iPhone using Tapatalk
 
I hear PEG is only used for higher concentrations and not really necessary otherwise. Any thoughts on this?
 
LMC ROIDS said:
Any chance to get the solutions for turinabol and Testosterone acetate? Thanks
Click to expand...
Made O-T with just 190 proof. Measured everything, put it in a jar, and left it at room temperature. 50mg/ml in alcohol (ethanol) Does any of you guys know if the dissolved gear looses it's potency in alcohol?
 
When we were doing liquid Orals, we never used any PEG. Most of the recipes only require proof grain alcohol to go into solution .The Winny, Anavar, anadrol and proviron were ones we did in suspension because you have to be able to get these hot enough to stay in solution. It's not even worth trying to get these into solution. Those old recipes have been around for years and in my opinion, aren't very helpful. They'll get you going in the right direction but you will make mistakes along the way. If you're a first time home brew newbie, the only way is to learn through trial and error unless you have some advice from someone who knows what they're doing
 
ever used peg in my life! As you said alcohol always worked, although ANAVAR was a bitch and would clump up dropper. It never did go right with just grain alcohol
 
I used the formula on here for anadrol 50 it was fine for a few days now I went to use it and it looks as tho it had crashed anything I can do to it to maybe make it reconstitute
 
Sorry to bump an old thread but couldn't find the information anywhere. Not trying to lose a bunch of orals. I'm between using HUMCO FLAVOR BLEND or some NOW glycerine for some Turinabol, Nolvadex, and Viagra. Glycerine is the cheapest and I read people use 100% so I'd like to go that route. If for some reason that wouldn't work and I need to go with HUMCO, I've read about the different formulas but don't necessarily understand the difference. The FLAVOR BLEND is on Amazon and seems like it would work should glycerine not suffice. Expertise and experience in this area are greatly appreciated. Thank you! &#55357;&#56911;
 
100%NATURAL+GH said:
Sorry to bump an old thread but couldn't find the information anywhere. Not trying to lose a bunch of orals. I'm between using HUMCO FLAVOR BLEND or some NOW glycerine for some Turinabol, Nolvadex, and Viagra. Glycerine is the cheapest and I read people use 100% so I'd like to go that route. If for some reason that wouldn't work and I need to go with HUMCO, I've read about the different formulas but don't necessarily understand the difference. The FLAVOR BLEND is on Amazon and seems like it would work should glycerine not suffice. Expertise and experience in this area are greatly appreciated. Thank you! &#55357;&#56911;
Click to expand...

be careful ordering the humco syrups, they work well for suspending most anything oral but they’re listed confusing on Amazon. So just double check it before checkout

as for what your suspending, I have no experience with turinabol powdeR sorry but the others you listed work fine with the Compounding syrups mixed with just a tad of alcohol. You won’t ruin them!

and feel free to bump as many old threads as ya like daddio!! That’s why we’re here !

please post a new TURINABOL THREAD WITH INSTRUCTIONS ON HOW YIU DID IT SUCCESSFULLY IF ITS NOT TOO MUCH TROUBLE! I’m sure it’ll help others down the line!!

welcome to MC! Happy to have you with us!
 
Thanks Presser. When I get it successfully suspended I'll be sure to post a recipe.

The HUMCO syrups have several different formulas. I'm looking at the "Flavor Blend" as it has good ratings and some of the written reviews gave me some confidence in its efficacy. I'd prefer to use organic glycerine if possible but haven't read any success stories so I'm hesitant. As far as adding alcohol, I can if necessary, but would prefer not to. Would it be to thin the mixture so it mixes more easily? And if so getting 190 where I live is difficult but I've got some 40% Kettle 1 Vodka I could mix in for dilution. Probably wouldn't taste as bad either. Lol

I've got a few more days until I'll have my materials so I can figure out the best recipe. If you know anyone on the board with liquid oral recipe knowledge and could ask about using glycerine, I'd really appreciate it.

Thanks again &#55358;&#57057;
 
100%Natural said:
Thanks Presser. When I get it successfully suspended I'll be sure to post a recipe.

The HUMCO syrups have several different formulas. I'm looking at the "Flavor Blend" as it has good ratings and some of the written reviews gave me some confidence in its efficacy. I'd prefer to use organic glycerine if possible but haven't read any success stories so I'm hesitant. As far as adding alcohol, I can if necessary, but would prefer not to. Would it be to thin the mixture so it mixes more easily? And if so getting 190 where I live is difficult but I've got some 40% Kettle 1 Vodka I could mix in for dilution. Probably wouldn't taste as bad either. Lol

I've got a few more days until I'll have my materials so I can figure out the best recipe. If you know anyone on the board with liquid oral recipe knowledge and could ask about using glycerine, I'd really appreciate it.

Thanks again &#55358;&#57057;
Click to expand...

Any luck yet daddio?
 
Bignick said:
For each hormone I listed ingredients needed. For the procedure scroll down.

Anadrol:
Highest concentration made - 50mg/ml
Per 1 gram of Oxymetholone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol

Anavar:
Highest concentration made - 20mg/ml
Per 1 gram of Oxandrolone powder you will need:
9.8 ml's of PEG 300
39.2 ml's of 190 Proof Grain Alcohol

Armidex:
Highest concentration made - 5mg/ml
Per 1 gram of Anastrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol

Clomid:
Highest concentration made - 50mg/ml
Per 1 gram of Clomiphene Citrate you will need:
8.4 ml's of PEG 600
10.5 ml's 190 Proof Grain Alcohol

Dianabol:
Highest concentration made - 50mg/ml
Per 1 gram of Methandrostenolone powder you will need:
19 ml's of 190 Proof Grain Alcohol
No PEG needed. Follow the no PEG recipe.

Femara:
Highest concentration made - 5mg/ml
Per 1 gram of Letrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol

Nolvadex:
Highest concentration made - 20mg/ml
Per 1 gram of Tamoxifen Citrate you will need:
9.8 ml's of PEG 600
39.2 ml's of 190 Proof Grain Alcohol

Proviron:
Highest concentration made - 50mg/ml
Per 1 gram of Mesterolone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol

Winstrol:
Highest concentration made - 25 mg/ml
Per 1 gram of Stanzolol you will need:
7.8 ml's of PEG 300
31.2 ml's of 190 Proof Grain Alcohol


---------------------------------------------------------------------------------

Solutions requiring PEG and 190 Proof Alcohol

Step 1. Prepare a hot water bath. Boil water in microwave or on a pot. Once boiling starts remove from heat.

Step 2. Place PEG and powder in beaker.

Step 3. Place the beaker deep enough in to the water so that the hot water is level with the PEG and powder. Gently swirl or stir with a stir rod until solution is clear. Reheat water as needed.

Step 4. Allow PEG to cool some. Then add in your 190 proof alcohol. You don't have to do this drop by drop but don't just dump it in. Pour it in slowly.

Step 5. Stir or gently shake until mixed.



For recipes that do not require PEG.

1. Mix powder and 190 proof alcohol.

2. Stir with stir rod or shake. Most powders that do not require PEG will disolve no problem. If heat is needed follow the instructions for heating powders that use PEG
Click to expand...


YC04Ux9.png


Format Updated To Make Easier To Read
January 14th 2024
 
You must log in or register to reply here.

Similar threads

Muscle Insider
How Long Does Alcohol Stop Fat Burning?
Replies
0
Views
375
Muscle Insider
Muscle Insider
Presser
Compounding Trenbolone Acetate Powder into an Injectable: A Comprehensive Guide
Replies
0
Views
388
Presser
Presser
Muscle Insider
Calories Per Gram Calculator
Replies
0
Views
122
Muscle Insider
Muscle Insider
jimbosmith316
Protein on the go
Replies
0
Views
323
jimbosmith316
jimbosmith316
Muscle Insider
Peptide Reconstitution + Mixing Guide with Calculator Copy
Replies
0
Views
102
Muscle Insider
Muscle Insider
Back
Top