my syno conversion

cooked up 5 carts of syno... got a little over 6.5 g of powder... I didnt use distilled water just my water which is well water... I ran the water over a ph strip and compared it to the ph strip from the syno water and rinsed until there was little or no difference in the color of the ph strip from the well water and the syno solution... was it ok to use well water??? just paranoid being lye is involved in something I will be making an injectible mix out of... cooked the powder into the oil and all I have left is the filtering through a whatman filter and will take my first shot tomorrow... cant wait to try it... I took some pictures as I did the conversion and if they came out ok I will post them. Also the mix kind of settles into a hazy cloud towards the bottom half of the bottle after a while.. but a quick shake put everything right back into suspension is that ok???

I used the kit that doesn't cleave the ester but the need for mega rinsing is needed in that method too -- in fact good rinsing is the MOST important step -- I don't think you can over-rinse.

Now, trust me on this one bro as I am a practicing chemical engineer -- use distilled water. When you do any kind of chemistry experiment tap water can, and usually does, screw up the results. The reason is that regular tap or well water is loaded with ions and minerals -- to say nothing of organics, chlorine, fluorine, and dissolved solids. It will most likely affect the end product. Will it hurt to inject it -- gosh, I'm not sure as I am not familiar with your water -- probably if you dried your powder real well you should be fine.

thankyou sundevil... well now maybe that explains why the solution was cloudy before filtering and why I clogged 3 whatman filters... (all the impurities in my well water) either way I now have 70ml of crystal clear sulution to be tested tonight.. I figure I lost some solution in the filter changes and figure the strength to be somewhere around 80mg/ml. Gonna try 1 ml or 80mg before working out tonight and I have been told you can feel this stuff kick in in like 2 or 3 hours . And I had extra filters and vials so it really helped or i would have been stuck trying to clean filters.. it pays to have extra supplies on hand..

Bro,

Probly next cycle gonna make my own prop with the kit. Besides using the distilled water problem was it easy? I have made fina many times. Does it compare to that in any way. Thanks for the time and keep us updated as to how it works for you. Later...


KD

kossdogs said:

Bro,

Probly next cycle gonna make my own prop with the kit. Besides using the distilled water problem was it easy? I have made fina many times. Does it compare to that in any way. Thanks for the time and keep us updated as to how it works for you. Later...


KD

Click to expand...

it was easy to make test no ester but time consuming.. you have to let the heet evaporate from the mix which takes almost 24 hours and it makes the whole house smell like metheyl alchohol. I think it is easier to make prop based on the directions I red for that process.
it dried nice after a few hours in the oven at 170 deg. and I bought a cheap gram scale to weight the final product... I am just nerveous about shooting it being lye was used in the conversion but am gonna shoot it in a little while.. will report on results when I feel them

johnnyboy845 said:

thankyou sundevil... well now maybe that explains why the solution was cloudy before filtering and why I clogged 3 whatman filters... (all the impurities in my well water) either way I now have 70ml of crystal clear sulution to be tested tonight.. I figure I lost some solution in the filter changes and figure the strength to be somewhere around 80mg/ml. Gonna try 1 ml or 80mg before working out tonight and I have been told you can feel this stuff kick in in like 2 or 3 hours . And I had extra filters and vials so it really helped or i would have been stuck trying to clean filters.. it pays to have extra supplies on hand..

Click to expand...

I agree on the filters -- for syno extra whatmans are a must. It took three on my last brew

johnnyboy845 said:

it was easy to make test no ester but time consuming.. you have to let the heet evaporate from the mix which takes almost 24 hours and it makes the whole house smell like metheyl alchohol. I think it is easier to make prop based on the directions I red for that process.
it dried nice after a few hours in the oven at 170 deg. and I bought a cheap gram scale to weight the final product... I am just nerveous about shooting it being lye was used in the conversion but am gonna shoot it in a little while.. will report on results when I feel them

Click to expand...

You guys should really check out the kit with the estrogen soluablizer -- no need to evaporate the methyl alcohol and you hang onto the TP.

I made up 5 carts with this kit and then took the TP powder to my lab. I did a melting point on the crystals 3 times and consistently found it to be 122 C -- guys, that is pure, pure, pure. Been using the stuff and I'm happy to say absolutely no gyno symptoms.

Also, there are assays up on the final product over at the Anabolex board showing that the solubolizer really works. Anymore I am mostly a syno and fina kind of boy -- this way there is no doubt what I'm using.

BTW -- no lye in the solubolizer kit that keeps the TP.

well gave my homebrew a try... only shot .5ml or about 40mg... anytime I try a new brand or batch of anything I usually just sample it first shot in case there is a reaction.. must say shot was painless and a few hours later still is painless.. will see how it goes in a day or 2.. I am starting a deca/test cyp cycle and running 50mg d-bol and shot the 40mg of TNE tonight.. broke a strength record for myself... went up 10lbs on my military press to 100lb dumbels for 5 reps.. and my neck feels so pumped it feels swolen. I was expecting to feel the test hit but it came on slow but powerfull and cant wait to shoot 80mg tomorrow... and with such a high dose of d-bol and the TNE am running almost 3/4mg of liquidex and 20mg of nolv because the nips were sore just from the d-bol ... so far love the stuff

took shot number 2 today.. shot 3/4 ml of TNE and took a nap.. When I woke 2 hours and stretched my muscles got pumped... the stuff kicks in that quickly... yesterdays inject site is slightly sore but that could be because I had a little bleeder and todays shot was painless... but I can tell the next day test is almost gone so thats why I am running 600mg of test cyp EW just to keep levels even and keep shooting TNE before workouts. I think if I was running TNE alone I might shoot twice a day.. gonna try the prop next