about wasting gear

T

TheElmo

Guest
so i have noticed that in my tren/prop cycle. will be wasting 2ccs every 20shots! :puke: which i never realised. i knew i was wasting some but not that much. i don't know exactly how the air bubble technique works but i don't wanna mess with air bubbles. So i was wondering if i put about 1/2 cc of b12 which is water based and will not mix with the tren or prop. if i don't shake my pin and withdrawl b12 first and then the other 2. i should have the b12 at the bottom of the pin. So that 1/2 of cc of b12 should push all of the ASS out of the pin?
 
Last edited:
Its not worth the hassle bro, even if you try really hard to layer it the stuff is gonna mix. If you fill the other CC with B12 then you will be reducing the amount of prop\tren that remains in the syringe. Use the air bubble method its not gonna kill you. I will try and dig up a pic that shows you how its done.
 
Okay I started off with 1cc B12 and .5cc air. I used b12 because it is red and easiest to see when we are getting close to the air.
If you notice the last pic almost looks like the plunger is all the way down, but its really not the B12 is gone and the air is in the pin and only very slightly in the syringe. Hope this helps.

I just took these about 10 minutes ago so I want you to know that I am not just posting a pic off the net. Feel confident that it is safe bro.

one through three
 
Last edited:
first of all thanks alot bro, very datailed info. lol
so if I am doing 2ccs of gear and put .5cc of and push the plunger almost to the bottom the air will no leave the needle is this right? I will try it with some b12 tonight. thanks again mace. great info here everyone!!
 
When you push on the plunger the air will look like it is compressing for lack of a better term. When you are almost to the bottom start to slow down as the air will transfer faster than the gear. Its okay if you go in with the air, but I just stop when the gear is out.
 
You are brave, mace. Wow, thanks for posting this. It helps take the scare out of it.
 
I tried it like 6 different time with both oil and b12 I put the needle in glass of water so I could see when the liquid was coming out and when the air was coming out also. All times as soon as I saw the liquid leave the pin and enter the needle. it was very difficult to tell how much more to push the plunger and all times I saw a shitload of air bubbles come out. It kind of scared the hell out of me to think that much air could go into my body. Well for now I am going to be a little biotch and just eat the 2ccs. oh well.
 
i wouldnt worry about the air bro. if you were inj IV then i would worry. the amount of air that would do harm you could not even fit in the pin. you could prolly fill the whoile barel withn air and be fine. personaly, i dont really worry about the few drops of gear
 
LOL Time and time again I see guys posting that you have to have to inject 3CCs of air to do any damage. And yet I have never found anyone willing to inject 2ccs of air to prove it ;)


CROWLER
 
I'm with jth.....a few drops aint worth hassling for.

That would be like me not lubing the needle, to save a drop or two. Sure would save a lil over the long run, but would make me hates shots 5 times more.

And I get maybe 2 drops leftover after each shot that I couldn't squeeze out. But to each his own.
 
TheElmo said:
I tried it like 6 different time with both oil and b12 I put the needle in glass of water so I could see when the liquid was coming out and when the air was coming out also. All times as soon as I saw the liquid leave the pin and enter the needle. it was very difficult to tell how much more to push the plunger and all times I saw a shitload of air bubbles come out. It kind of scared the hell out of me to think that much air could go into my body. Well for now I am going to be a little biotch and just eat the 2ccs. oh well.

Don't sweat it bro, if you feel its worth it down the road then try it then when you feel more comfortable.
 
Back
Top