Oh yeah my bad..I can do that. Let me get right on it.
You can do a 50/50 EO/Castor with 1.8%BA and 11% BB.
So in your 100ml that's
20 grams Test C
20 grams Tren E
11mls BB
1.9Mls BA
26.5 EO
26.5 Castor oil
Heres the steps:
1. Add the BA to the vial
2. Add small amounts to the vial of each powder
3. Continue this and keep swirling as it becomes a sludge add the BB you can add it all but small amounts to dissolve it are better
4. I suggest heating lightly just enough to dissolve the powder into the solvents
5. The volume of solvent to powder will be high so heat some oil and slowly add it while heating the entire contents of the powder, solvents and small amounts of oil.
6. add almost all the heated oil EO and most of the castor oil (save 3mls) and continue heating gently-you don't want it hot just heat it to supersaturate it and dissolve the mix together effectively bonding it to the carrier
7. after its mixed and heated let it sit to cool..look for separation, sludge, crystals etc.
8. If you get any of the above add 1ml of heated oil that you left out so now you have 2mls of castor left out.
9. if all is ok you heat again gently then filter..
10. after your done filtering add the rest of the oil and heat the entire contents-make sure you vent if your using a vial.
11. store at room temp away from direct sunlight
Note-heating can be done in a boiling water bath, magnetic stirrer or a hot plate and glass rod.
Clean the area with sterile items 409, bleach wipes etc..no fans on no windows open
Make sure to be sterile as possible-THIS IS A MUST
Any questions just ask.