Test P & Test E

napsgearhttps://ugloz.is/ domestic-supplypuritysourcelabsYOURMUSCLESHOPUGFREAK
have you ever used a caulking gun? You squeeze it like a grip and it increases pressure.
 
Here is a recipe for Test E you wanted, hopefully it's correct...............!

20 g Test E
1 ml BA
11 ml BB
68 ml GSO (oil of choice)
-----------------------------
100 ml => 20 g=20,000 => 100/20,000=200 mg/ml

Now as you requested 275 mg/ml just change the amount of Test E from 20 g to 30 g and the equation is as follows:

30 g Test E
1 ml BA
11 ml BB
68 ml GSO (oil of choice)
------------------------------
110 ml => 30 g = 30,000 => 110/30,000=273 mg/ml

I HOPE THE CALCULATIONS ARE CORRECT AND i URGE ANYONE TO PLEASE DOUBLE CHECK AND CORRECT IF THEY ARE WRONG!

Also, I would like to add (hope he doesn't get made, not sure if he wants it public) but PG may be coming out with a recipe book soon and I highly suggest anyone interested in home brewing buy this book. PG has been an amazing asset to this site and I would know nothing if it was not for him. I will be the first to purchase this book! If if you think you are not in need of this book you should buy it anyway to reward PG for all his help on this site. There should not be a single home brewer on this site brewing with out this book of knowledge.
 
Up your BA content to 1.9mls and decrease the BB. Unless you are using a thick carrier oil such as Cottonseed or sesame oil then just decrease by the amount reduced from the BA. TEST E does not require high BB ratios-You do not need BB with every recipe. TEST E will dissolve fully with warm oil added.

The math is correct for those MG/ML ratios. remember you will lose about 10% filtering and for impurities.
Taste the Test E, on the part of your tongue that tastes bitterness. If you taste any bitterness and its not smooth as wax and you have the acid flush powder. You will need to make a ph correction. If this is the case let me know and I will tell you how.



d12hazz said:
Here is a recipe for Test E you wanted, hopefully it's correct...............!

20 g Test E
1 ml BA
11 ml BB
68 ml GSO (oil of choice)
-----------------------------
100 ml => 20 g=20,000 => 100/20,000=200 mg/ml

Now as you requested 275 mg/ml just change the amount of Test E from 20 g to 30 g and the equation is as follows:

30 g Test E
1 ml BA
11 ml BB
68 ml GSO (oil of choice)
------------------------------
110 ml => 30 g = 30,000 => 110/30,000=273 mg/ml

I HOPE THE CALCULATIONS ARE CORRECT AND i URGE ANYONE TO PLEASE DOUBLE CHECK AND CORRECT IF THEY ARE WRONG!

Also, I would like to add (hope he doesn't get made, not sure if he wants it public) but PG may be coming out with a recipe book soon and I highly suggest anyone interested in home brewing buy this book. PG has been an amazing asset to this site and I would know nothing if it was not for him. I will be the first to purchase this book! If if you think you are not in need of this book you should buy it anyway to reward PG for all his help on this site. There should not be a single home brewer on this site brewing with out this book of knowledge.
Click to expand...
 
Question.

What is PH correction?

How do you perform this?



Powderguy said:
Up your BA content to 1.9mls and decrease the BB. Unless you are using a thick carrier oil such as Cottonseed or sesame oil then just decrease by the amount reduced from the BA. TEST E does not require high BB ratios-You do not need BB with every recipe. TEST E will dissolve fully with warm oil added.

The math is correct for those MG/ML ratios. remember you will lose about 10% filtering and for impurities.
Taste the Test E, on the part of your tongue that tastes bitterness. If you taste any bitterness and its not smooth as wax and you have the acid flush powder. You will need to make a ph correction. If this is the case let me know and I will tell you how.
Click to expand...
 
PH is the acidity in the powder (i believe) but can't remember how to bring it down. Have to wait for PG for that one.
 
As it was mentioned its the acid wash.. Carbolic acid in Test E can be reduced with a base and lower the acidic values of the primary substance.
I can mention how, but after the E-mails and IM's Im getting with rudeness because I wont give recipes for every brew everyone wants. I might just keep this to myself..RIGHT mghoward74?

You have to keep some things a secret..if you want someones knowledge, being a dick to them wont get you what you want.
 
There's a old & very true statement I live by and refer to and it says...."The game is to be sold, NOT told." For those that may not know what that means, is....if you want valuable information/education.. you have to pay for it (no free handouts)! Or get paid to give out information.

My little time here, I've seen you give out some very helpful info....kudos. Hope I'm not one of those dick you're referring about.


Powderguy said:
As it was mentioned its the acid wash.. Carbolic acid in Test E can be reduced with a base and lower the acidic values of the primary substance.
I can mention how, but after the E-mails and IM's Im getting with rudeness because I wont give recipes for every brew everyone wants. I might just keep this to myself..RIGHT mghoward74?

You have to keep some things a secret..if you want someones knowledge, being a dick to them wont get you what you want.
Click to expand...

- - - Updated - - -

Presser said:
good question and welcome to MuscleChemistry.com
Click to expand...

Thanks

Glad to be here!
 
PG might be coming out with book. Look for it , i know I will be the first to purchase it. Put in some work and PG will most definitely help you. He's just not going to give the info..... but definitely won't let you screw up. He has helped me tremendously and it's only because i try first and ask questions to make sure it's right. That man has put in a lot of hard work and made this site an even better place. Presser should give him a free pair of black speedos for all his efforts (lol).

That's a great saying mg....... just put in the work (read, study then ask question and you'll be amazed by the help you get here! Plus I pay PG a monthly payment for his services (lol)..... ask him about the donation acceptance program (lol).....
 
Oh..I plan on putting in the work...believe that. I have the basic knowledge and what not on homebrew. I'm always researching & learning.

Once I figure out the "In's & Out's" of this board.......I'll definitely be posting a lot more.

Btw....Presser needs to give out more than free speedos....lol.

d12hazz said:
PG might be coming out with book. Look for it , i know I will be the first to purchase it. Put in some work and PG will most definitely help you. He's just not going to give the info..... but definitely won't let you screw up. He has helped me tremendously and it's only because i try first and ask questions to make sure it's right. That man has put in a lot of hard work and made this site an even better place. Presser should give him a free pair of black speedos for all his efforts (lol).

That's a great saying mg....... just put in the work (read, study then ask question and you'll be amazed by the help you get here! Plus I pay PG a monthly payment for his services (lol)..... ask him about the donation acceptance program (lol).....
Click to expand...
 
Just be patient brother, there is not a better site out there. If there is anything I can help with just ask. I am no where close to PG but I am learning. Lots of great people on here.

Also, welcome to MC brother......................
 
You must log in or register to reply here.

Similar threads

R
Trenbolone acetate for 10 weeks and test E
Replies
10
Views
640
JasonPriest
JasonPriest
C
test E with primo for lean muscle mass
Replies
11
Views
716
Arabian
Arabian
A
using equipoise and stacking it with test E?
Replies
11
Views
878
Arabian
Arabian
E
Anavar and test E
Replies
11
Views
904
Arabian
Arabian
P
masteron and test E stack
Replies
16
Views
1K
25homes
25homes
Back
Top