Gonakor HCG

[mailboxkillR]

Gonakor HCG 250iu with 10ml solution to = 2500iu. Anyone know how to make this as concentrate as possible so I don't have to shoot 10 ml.

 

[mailboxkillR]

bumping this boitch hopefully peeps will be back from the weekend ready to post.

 

[winnie]

bump

 

[mailboxkillR]

chem it's 2 seperate vials 1 has 250 iu hcg and other has 10 ml solution which when mixed together gives you 2500 iu. What would happen if I only mix 5ml of the solution in the powder would it be 5000 iu then.

 

[scorpio]

This is the only thing I can find on it bro.

You can mix in as much of the water that came in the 2nd vial as you would like. The strength of it is up to you.

There is 2500mg of HCG in the vial with powder in it mixed w/ some b12 (I'm going from memory so I may be off).

So mix it however you plan to use it - 500mg EOD or whatever (2 1/2 cc's of water).

 

[mailboxkillR]

Ok I'm lost like thats something new. the power vial says 250iu 30mcg 1ml and the liquid vial says 10 ml agua inyectable. So does this mean that the power is 2500 hcg no matter how much liquid I mix with it? I should just say screw it and just use clomid thats pretty much idiot proof (can you tell I'm having a shitty day grrrrr)

 

[scorpio]

Yes the powder total is 2500. The strength depends on how much water you add.

 

[footballcat]

Well make sure u keep it in the fridge. It goes in really easy

 

[mailboxkillR]

thanks bro's thats what I'm gonna do just add 5ml and shoot 1ml/day. Do you think thats too much for sub-q.

 

[mailboxkillR]

soundds like a plan to me thanks chem scorp and fbcat. time is comming soon

 

[footballcat]

man this stuff goes in like butter, you can take 2ml easy

 

[Userat204]

Guys if the Gonakor is 2,500iu hcg with 10 ml water it's still 2,500iu hcg no matter how much water you add.

Think of it this way:
you have 2,500iu hcg and 10ml water(assuming it's containing a bacteriostat(BA), if not you need to get bacteriostatic water, not just sterile water so it will last but it's possible you will still get some degrading over time, and yes keep it refrigerated.

Amount of hcg divided by amount of water added= dose per ml/cc(
Ok 2500iu / 10ml water = 250 iu per ml/cc
2500iu / 9ml water = 277.777778 iu per ml
2500iu / 8ml = 312.5iu hcg per ml/cc
2500iu / 7ml = 357.142857 iu hcg per ml/cc
2500iu / 6ml = 416.666667 iu /ml
2500iu / 5ml = 500iu/ml
2500iu / 4ml = 625iu/ml
2500iu / 3ml = 833.333333 iu/ml
2500iu / 2ml = 1250 iu/ml
2500iu / 1ml = 2500 iu/ml

thats your concentration that you decide, however much water is added, is you dose which hcg is dosed by units/ml
remember that a slin pin will either have 50 units(.5ml/cc) or 100 units (1ml/cc)
slin pins are set up so they are measuring two units of insulin per line. So if you look at a slin pin, it doesn't matter if it's a .5 or a 1ml, there will be 4 lines, then the 5th line has the number 10 next to it. Then 4 lines and the number 20.

Those se lines and numbers measure iu of insulin so you need to choose a concentration that you can easily figure out dosing. And I guess it comes down to your intended use! For the hcg diet I really don't know enough to post on it, if you are running hcg on cycle I would stay between 250-300 iu at a time, and if you are starting to shrink go from 2 days ton3 days of use.

So if I wanted to use 250iu twice a week during a cycle, I would add 1ml and that gives you 2500iu per ml or 100 units. And 1/2cc is 1250 iu
so each line of 10(20,30,40,50 etc.) will equal 250iu
10iu line (1ml water added) -250 iu hcg
20iu line -500iu hcg
30 -750
40 -1000 iu hcg
50- 1250 iu hcg
so that would make each of the 4 dashes prior to the 10,20 etc. 50iu. So if you want to use 300 iu with 1ml water added you would fill your pin to one dash mark past the number 10.

Hopefully thats at not confusing because it's a simple process when u think about it. Hope that helps.

 

[Userat204]

Also it sounds like it's sterile water that comes with it, you either need to add a filtered bacteriostat which if you don't know exactly what that means and how much to add just buy some bacteriostatic water to add, sterile water is typically added to HG products which are intended for a 1 time dose. In order to preserve it and prevent the growth of new bacteria, you should add bacteriostatic water. If using it post, I would get a few bottles, I typically blast 500 iu a day for 10 days so 2 bottles would suffice, take another 4 days off, then start serm use (toremifene, clomid, nolva, ). You don't want to use a seem at the same time, It will contradict the use of it, the main thing in pct is allowing proper time off prior to starting pct, that's why I switch to short esters before I use to pct. Just for timing. Toremefene is my seem of choice with nolva added to it.

Keep in mind hcg can create estro from the gonadal that won't be affected by AI use, but for most ppl, an AI should be used if an aromatizing cycle then during the hcg blast and pct , if using adex in pct cut dose in half, at the mid way point. And remember your not trying to rid yourself of estro, you need it, you just want to manage the amount and seems don't reduce estro, they are Selective E Receptor, so used for preventing gyno, but also to force gnrh in pct use to signal LH and FSH.

- - - Updated - - -

Lol I just posted all that to a thread that's years old, new here, but I had searched the brand name and when the site came up I went off about it, nice first few post, really I'm not as dumb as this looks. Lmfao.

 

[fstr03svtcobra]

I'm sure he still hasn't made that hcg yet and will follow your protocol.

 

[Presser]

Also it sounds like it's sterile water that comes with it, you either need to add a filtered bacteriostat which if you don't know exactly what that means and how much to add just buy some bacteriostatic water to add, sterile water is typically added to HG products which are intended for a 1 time dose. In order to preserve it and prevent the growth of new bacteria, you should add bacteriostatic water. If using it post, I would get a few bottles, I typically blast 500 iu a day for 10 days so 2 bottles would suffice, take another 4 days off, then start serm use (toremifene, clomid, nolva, ). You don't want to use a seem at the same time, It will contradict the use of it, the main thing in pct is allowing proper time off prior to starting pct, that's why I switch to short esters before I use to pct. Just for timing. Toremefene is my seem of choice with nolva added to it.

Keep in mind hcg can create estro from the gonadal that won't be affected by AI use, but for most ppl, an AI should be used if an aromatizing cycle then during the hcg blast and pct , if using adex in pct cut dose in half, at the mid way point. And remember your not trying to rid yourself of estro, you need it, you just want to manage the amount and seems don't reduce estro, they are Selective E Receptor, so used for preventing gyno, but also to force gnrh in pct use to signal LH and FSH.

- - - Updated - - -

Lol I just posted all that to a thread that's years old, new here, but I had searched the brand name and when the site came up I went off about it, nice first few post, really I'm not as dumb as this looks. Lmfao.

Its all good brutha! Good solid info is good solid info period! Someone will search it here and find the info useful, 100% no doubt! But yeah it was kind of funny lol, but not a waste!

 

[fstr03svtcobra]

- - - Updated - - -

Lol I just posted all that to a thread that's years old, new here, but I had searched the brand name and when the site came up I went off about it, nice first few post, really I'm not as dumb as this looks. Lmfao.

Welcome to MC man and in case you couldn't tell from my post I was being sarcastic. I'm sure your info is gtg and will benefit others.

 

[EMW14]

It's benefiting me, I'm still trying to learn all I can about this stuff!!