Test is burning me up

[Ox 51]

Just got a new batch of testosterone enanthate and the first two injections have hurt like a bitch. What could be the problem?

I did 2 ML in my glute last Saturday, but then drove 9 hours to Florida. So, I thought it was just sitting in the car all day that was the problem. But, I did 1 ML this morning in my quad and it hurts like hell. It is only 200/ml, so it's not even a strong dose.

 

[Metal85]

wheres the updated pix

 

[Presser]

its probably the BA in it bro. Heat it up and it will be 100% times better! You can take the syringe and take the needle off it, and pop it in the microwave for about 6 seconds, then pop the pin back on it and shoot it, works every time without ruining the gear

or you can put a pin it the top of the stopper and leave it there then heat up a bowl of water and put the bottle in the water and let it sit, the ba will disapate out, and u will be fine

either way works bro but ya got to heat it up real fast and it will be fine

 

[Zeus]

its probably the BA in it bro. Heat it up and it will be 100% times better! You can take the syringe and take the needle off it, and pop it in the microwave for about 6 seconds, then pop the pin back on it and shoot it, works every time without ruining the gear

or you can put a pin it the top of the stopper and leave it there then heat up a bowl of water and put the bottle in the water and let it sit, the ba will disapate out, and u will be fine

either way works bro but ya got to heat it up real fast and it will be fine

Belive it or not, but a hairdryer works fckn great. I agree wit presser though. gotta be the BA....

 

[Presser]

Belive it or not, but a hairdryer works fckn great. I agree wit presser though. gotta be the BA....

never heard of that,

 

[Lightsout]

Belive it or not, but a hairdryer works fckn great. I agree wit presser though. gotta be the BA....

That is how I do it to bro.. It work like a champ !!

 

[Presser]

damn ya learn something new every day

 

[Rep]

I like pressers way but my buddy puts the vial in the oven at 200 degrees for 10 minutes. Works like a charm. Smooth,

 

[Metal85]

or just run hot water over it from the faucet for a minute or 2

 

[Ox 51]

Now is this something I'll need to do before every injection or just one time for the whole bottle?

 

[Presser]

Now is this something I'll need to do before every injection or just one time for the whole bottle?

one time for the whole bottle if u do the needle in the top and then let it sit in hot hot water, or u can do it every time with popping loaded syringe in the microwave for 6 seconds, the microwave works 10000% gaurenteed every single time if the other methods do not work

 

[Ox 51]

Okay, I will definitely try one of these methods. Thanks, guys.

 

[big in vegas]

I have a lamp that I just set the syringe on top of and the heat off the bulb heats the oil up nicely

 

[Metal85]

I wouldnt do it to the whole bottle bc than its getting to hot than cooling down again. Do it after you draw it Homeslice

 

[Ox 51]

Jesus, I am retarded. I think I read Presser's two suggestions and combined them in my mind somehow. Now I see that he said to put the syringe in the microwave or heat the bottle in water. Well, I put the bottle in the microwave....

For those of you stupid enough to try such a thing, let me tell you what happened. The vial has that little metal ring around the top right? Well, I never even thought about putting metal in the microwave. I put a needle in the top to vent and stuck it in the microwave for six seconds. Well, about two seconds in, it looked like lightening struck the vial. I took it out and the test was a little black looking and the needle had completely melted into the vial, so there were little black dots floating around in the test. So, I had to trash a nearly full bottle of test. Luckily I had another bottle, so I put it in the hot water and I'll know in a few hours if that helped the burning or not.

 

[muscleitis]

bahaha, sory man, but that got me.lol. whew

 

[bigghorn]

Use a hairdryer and stop wasten time . That's gear 101 education from the 70's.

 

[Presser]

Jesus, I am retarded. I think I read Presser's two suggestions and combined them in my mind somehow. Now I see that he said to put the syringe in the microwave or heat the bottle in water. Well, I put the bottle in the microwave....

For those of you stupid enough to try such a thing, let me tell you what happened. The vial has that little metal ring around the top right? Well, I never even thought about putting metal in the microwave. I put a needle in the top to vent and stuck it in the microwave for six seconds. Well, about two seconds in, it looked like lightening struck the vial. I took it out and the test was a little black looking and the needle had completely melted into the vial, so there were little black dots floating around in the test. So, I had to trash a nearly full bottle of test. Luckily I had another bottle, so I put it in the hot water and I'll know in a few hours if that helped the burning or not.

lol, too funny brutha, sorry but it is,lol

 

[Ox 51]

I'm telling you, I jumped back on here to see why you told me to do something so stupid...then I re-read your post and was like "oh, he didn't tell me to do that."