IGF 1 Lr3PeptidesPeptides PCT SARM

 How To Use IGF-1 Lr3 In a Cutting Cycle and Bulking Cycle

 How To Use IGF-1 Lr3 In a Cutting Cycle and Bulking Cycle. Dosages and Storage Information. Best Peptide Lr3 IGF 1

IGF-1 LR3

Explanation/common uses of IGF LR3:

Peptide Store

The main work of IGF-1 LR3 (IGF-1 LONG R3) is to build new muscle tissues by promoting nitrogen retention and protein synthesis. IGF-1 not only makes muscle fibers bigger, but also makes more of them. IGF-1 has potent effect on fat metabolism and helps the body to burn fat rapidly. It also improves mental functions such as reflexes and learning ability. IGF-1 LR3 is widely used by bodybuilders, but it not recommended for inexperienced ones.

IGF-1 LR3 Dose:

The best way to use IGF-1 LR3 (IGF-1 LONG R3) is to use it in regulated dosages. Usual dosages ofIGF-1 LR3 (IGF-1 LONG R3) are 20mcg to around 60mcg per day. IGF is usually available by the milligram (1000mcg), which is equivalent to using 20mcg a day for 50 days. But for the most part, the actual dosage depends upon how much the person is able to spend on Long R3 IGF-1, although most are usually satisfied with the 20-50mcg per day dosage. Additionally, IGF is also best taken either IM or subcutaneously, having more direct effects on the body when injected. It’s also recommended to be taken during the morning or after weight training sessions.

IGF-1 lr3

How to take:
IGF-1 LR3 (IGF-1 LONG R3) is taken by Injecting intramuscularly i.e. injecting 20mcg into one bicep and 20mcg into the other.

Duration:
The course length is usually 6 weeks but you can go up to 90 days.

Dilution:
Long R3 IGF-1, equivalent to a 1mg/ml = 1000 mcg vial, it is best prepared by using 1ml or 2ml of acetic acid

Side effects reported:
severe headache, nausea, and possible hypoglycaemia.

Stacked:
Many research studies have shown that GH and IGF-1 act synergistically to augment the effect of either hormone taken individually. So, the greatest results will take place when effective dosages of both hormones are injected. Usually 20-30mcg of IGF-1 (post workout) and 2-4IU GH (with breakfast) is the ideal stack for optimal results and minimal side effects.

Storage:
Storage Condition: +22 C (71.6 F)
Biological Potency No Change up to 2 years
Immunological Activity No Change up to 2 years
Mobility of Protein No Change up to 2 years
Elution Profile by reversed phased HPLC No Change up to 2 years

 

 

IGF-1 LR3

Explanation/common uses of IGF LR3:

The main work of IGF-1 LR3 (IGF-1 LONG R3) is to build new muscle tissues by promoting nitrogen retention and protein synthesis. IGF-1 not only makes muscle fibers bigger, but also makes more of them. IGF-1 has potent effect on fat metabolism and helps the body to burn fat rapidly. It also improves mental functions such as reflexes and learning ability. IGF-1 LR3 is widely used by bodybuilders, but it not recommended for inexperienced ones.

IGF-1 LR3 Dose:

The best way to use IGF-1 LR3 (IGF-1 LONG R3) is to use it in regulated dosages. Usual dosages ofIGF-1 LR3 (IGF-1 LONG R3) are 20mcg to around 60mcg per day. IGF is usually available by the milligram (1000mcg), which is equivalent to using 20mcg a day for 50 days. But for the most part, the actual dosage depends upon how much the person is able to spend on Long R3 IGF-1, although most are usually satisfied with the 20-50mcg per day dosage. Additionally, IGF is also best taken either IM or subcutaneously, having more direct effects on the body when injected. It’s also recommended to be taken during the morning or after weight training sessions.

Andarine, ostarine, ligandrol, Cardarine
Anniversary Special Celebrating 19 Years Online!

 

How to take:
IGF-1 LR3 (IGF-1 LONG R3) is taken by Injecting intramuscularly i.e. injecting 20mcg into one bicep and 20mcg into the other.

Duration:
The course length is usually 6 weeks but you can go up to 90 days.

Dilution:
Long R3 IGF-1, equivalent to a 1mg/ml = 1000 mcg vial, it is best prepared by using 1ml or 2ml of acetic acid

Side effects reported:
severe headache, nausea, and possible hypoglycaemia.

Stacked:
Many research studies have shown that GH and IGF-1 act synergistically to augment the effect of either hormone taken individually. So, the greatest results will take place when effective dosages of both hormones are injected. Usually 20-30mcg of IGF-1 (post workout) and 2-4IU GH (with breakfast) is the ideal stack for optimal results and minimal side effects.

Storage:
Storage Condition: +22 C (71.6 F)
Biological Potency No Change up to 2 years
Immunological Activity No Change up to 2 years
Mobility of Protein No Change up to 2 years
Elution Profile by reversed phased HPLC No Change up to 2 years

IGF 1 lr3 & Anabolic Steroid Bulking Cycle:

IGF 1 lr3 80mcg daily up to 100mcgs for the more advanced bodybuilders with at least a few Anabolic Steroid Cycles under their belt!

Stacks Well With Most Any Anabolic Steroid! The beauty is that you will be able to get more out of your hormones than you would have otherwise.

IGF 1 lr3 & Anabolic Steroid Bulking Cycle:

IGF 1 lr3 30mcg daily for the beginner up to 80mcg works very well during your entire cutting phase of training, especially leading up to a show. Aside from its ability to allow the user to get more out of the same dosage of gear, or lower their dosage while reaping the same benefits, you can also expect to lose a substantial percentage of bodyfat when used in conjunction with your chosen anabolics during cutting phase! This is due to the igf 1 lr3 signaling your body to start burning fat storage for energy!

Discussion
  1. Understanding IGF-1 LR3 and Its Role in Cutting Cycles
    Insulin-like Growth Factor 1 Long R3, commonly referred to as IGF-1 LR3, is a synthetic protein and a longer-lasting version of the endogenous hormone IGF-1. It is renowned for its role in muscle building, recovery, and anti-aging. IGF-1 LR3 has a unique ability to induce muscle growth by promoting nitrogen retention and protein synthesis. Its use in cutting cycles is becoming increasingly popular among bodybuilders and athletes looking to preserve muscle mass while reducing body fat.
    How IGF-1 LR3 Works in a Cutting Cycle
    During a cutting cycle, the primary goal is to lose body fat while retaining as much muscle mass as possible. IGF-1 LR3 aids in this process by enhancing the body's ability to burn fat for energy, improving insulin sensitivity, and promoting the preservation of lean muscle tissue. Additionally, IGF-1 LR3 is known to upregulate the receptors for other compounds and hormones, which means it can enhance the effectiveness of other steroids used in the stack, allowing users to get more out of their cutting cycle.
    Popular Steroids to Stack with IGF-1 LR3 for a Cutting Cycle
    When it comes to stacking IGF-1 LR3 with other compounds for a cutting cycle, the goal is to choose steroids that complement its fat loss and muscle preservation capabilities. Here are some popular choices:
    Testosterone Propionate: A fast-acting form of testosterone that helps maintain muscle mass and strength levels during low-calorie diets. Dosage: 100-150mg every other day.
    Winstrol (Stanozolol): Known for its ability to improve muscle hardness and enhance fat loss without significant water retention. Dosage: 25-50mg daily.
    Anavar (Oxandrolone): A mild, liver-friendly steroid that is great for fat loss and muscle preservation. Dosage: 20-40mg daily.
    Primobolan (Methenolone): Ideal for cutting due to its ability to help retain muscle while dieting. Dosage: 400-600mg per week.
    IGF-1 LR3 Dosage and Duration for Beginners to Intermediate Users
    For those new to using IGF-1 LR3, it's essential to start with a conservative dose and gradually adjust based on tolerance and results. A recommended starting dose is 20-40mcg per day. Intermediate users may increase the dose up to 60-80mcg per day if well-tolerated. The duration of use typically ranges from 4 to 6 weeks, which aligns with the duration of a typical cutting cycle.
    The Synergistic Effect of IGF-1 LR3
    The upregulation of receptors by IGF-1 LR3 not only enhances the muscle-building and fat-burning effects of the hormone itself but also amplifies the benefits of other anabolic steroids in the stack. This synergy allows for more efficient use of the compounds, potentially leading to better results with lower doses of steroids, thus minimizing the risk of side effects.
    Conclusion
    IGF-1 LR3 is a powerful tool in the arsenal of bodybuilding supplements, especially during a cutting cycle. Its ability to preserve muscle, enhance fat loss, and improve the effectiveness of other steroids makes it a valuable addition to any cutting stack. However, it's important to approach its use with caution, starting with low doses and paying close attention to the body's response. Always remember that the use of any performance-enhancing drug should be accompanied by thorough research and consideration of the potential health risks.

Andarine s4, Ostarine mk 2866, Ligandrol lgd 4033, Cardarine GW501516, Stenabolic SR9009, IGF 1 Lr3, Aromatase Inhibitors,

Muscle Insider

Board Certified PHD

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.